Cu+(H2) and Na+(H2) adducts in exchanged ZSM-5 zeolites

Cu(I) ions in Cu-ZSM-5 form Cu+(H2) complexes, stable at room temperature and sub-atmospheric H2 pressure, which do not have any homogeneous analogue except for matrix-isolated [Cu(eta2-H2)Cl]. Comparison with the unstable Na+(H2) adducts formed in the parent Na-ZSM-5 zeolite allow the conclusion that the Cu(I)/H2 bond is governed by sigma-pi overlap forces.     

Thermal decomposition products of copoly(arylene ether sulfone)s characterized by direct pyrolysis mass spectrometry

Pyrolysis products with mass of up to 850 Da were detected by direct pyrolysis mass spectrometric (DPMS) analysis of a series of copoly(arylene ether sulfone)s (PES-PPO) synthesized by nucleophilic condensation of either 4,4′-dichlorodiphenylsulfone (CDPS) or 4,4′-bis-(4-chlorophenyl sulfonyl) biphenyl (long chain dichloride, LCDC) with different molar ratios of hydroquinone (HQ) or dihydroxydiphenylsulfone (HDPS). Pyrolysis products retaining the repeating units of the initial copolymers were formed at temperatures ranging from 420 °C to 470 °C (near the initial decomposition temperature). At temperatures higher than 450 °C were observed products containing biphenyl units, formed by the elimination process of SO₂ from diphenyl sulfone bridges. Products having biphenyl and dibenzofuran moieties were detected in the mass spectra recorded at temperatures above 550 °C. These units were formed by loss of hydrogen atom from diphenyl ether bridges. Although the EI (18 eV) mass spectra of the pyrolysis products of the samples investigated were very similar, it was found that the relative intensity of some ions reflects the molar composition of the copolymers analysed. Cyclic and linear oligomers with very low molecular mass, present in the crude copolymers, were also detected by DPMS. Thermogravimetric analysis also showed their excellent thermal stability below 400 °C. It indicates that the copolymers yield a char residue of 40-45% at 800 °C, which increases with the PPO mole fraction in the samples.     

FTIR and WAXS analysis of periodate oxycellulose: Evidence for a cluster mechanism of oxidation

Cellulose paper (Whatman no.1, chromatographic grade) was oxidised with 0.1 M sodium metaperiodate at different oxidation levels (0–11 days at room temperature), and analysed with FTIR before and after chemical treatments (reduction, further oxidation, alkaline hydrolysis). The deconvolution of infrared data allowed us to verify that periodate oxidises cellulose in isolated domains, leading to the decrease of crystallinity, in agreement with the results of wide angle X-ray scattering (WAXS). In particular, the alkaline hydrolysis (β-alkoxy fragmentation) followed by mild acid treatment removed the oxidised groups and recovered most of the crystallinity of cellulose, as determined by the FTIR crystallinity index.     

Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

UV stabilizers bonded to transition metals: Synthesis and X-ray structure of 2-(2′-hydroxyphenyl)benzotriazole-oxovanadium(IV) and -dioxomolybdenum(VI) complexes

The UV-stabilizer 2-(2′-hydroxy-5′-methylphenyl)benzotriazole (Tinuvin P, LH) has been used as a monoanionic bidentate ligand for complexing oxocations. Displacement of acacH from [VO(acac)₂] and [MoO₂(acac)₂] gave [*VO(acac)₂*(μ-L)] (2) and [cis-O₂Mo(acac)L] (3) respectively, as crystalline compounds. Their structure has been determined by an X-ray analysis showing the structural changes occurring upon coordination. The UV spectrum of Tinuvin P is significantly affected by complexation.     

Investigations of chromium(III), manganese(III), tin(II) and lead(II) dithiocarbamate complexes

Piperidine-, morpholine-4-, N-methylpiperazine-4- and thiornorpholine-4-carbodithioate complexes of chromium(III), manganese(III), tin(II) and lead(II) are prepared and characterized by chemical analyses, spectroscopic methods (I.R. and electronic spectra), magnetic susceptibilities, conductivity measurements and mass spectra. The complexes are of the type M(R₂dtc)n, where n is the oxidation number of the metal ion. Where possible a tentative stereochemistry of the complexes is discussed on the basis of the results obtained. In all the complexes the dithiocarbamate ligands show bidentate behaviour.     

Preparation of optically pure fused polycyclic scaffolds by Ugi reaction followed by olefin and enyne metathesis

Optically pure fused polycyclic scaffolds containing up to eight stereocentres have been synthesised by olefin metathesis and tandem enyne metathesis/Diels-Alder addition of Ugi multicomponent reaction adducts generated from 7-oxa-[2.2.1]-bicyclic amino acid derivatives.     

Zinc(II) as an allosteric regulator of liposomal membrane permeability induced by synthetic template-assembled tripodal polypeptides

Three copies of peptide sequences from the peptaibol family, known to affect the permeability of the lipid bilayer of membranes, were connected to tris(2-aminoethyl)amine (TREN), a tripodal metal ion ligand, to prepare functional peptides capable of modifying the permeability of liposomal membranes. Some of the resulting tripodal polypeptide derivatives are very effective in promoting carboxyfluorescein (CF) leakage from CF-loaded unilamellar vesicles composed of a 70:30 phosphatidylcholine/cholesterol blend. The activity of these novel compounds was shown to be tunable upon metal ion coordination of the TREN subunit; the tripodal apopeptide was far more effective than its ZnII complex. Leakage experiments showed that a minimum number of five amino acids per peptide chain is required to form active systems. A mechanism is proposed in which the ZnII ion changes the conformation of the template from extended to globular and thus acts as an allosteric regulator of the activity of the systems. Molecular modeling studies indicate that when the three peptide chains are connected to the template in the extended conformation, the resulting tripodal polypeptide is able to span across the membrane, thus allowing the formation of permeable channels made of a cluster of molecules. The same change of conformation induces, to some extent, fusion of the membranes of different liposomes.     

Synthesis and functional studies of THF-gramicidin hybrid ion channels

THF-gramicidin hybrids 2-4 with the L-THF amino acid 1 in positions 11 and 12 and compounds 5-8 with the D-THF amino acid ent-1 in positions 10 and 11 were synthesized and their ion channel properties were studied by single-channel-current analysis. The replacement of positions 11 and 12 by the L-THF amino acid 1 gave a strongly reduced channel performance. In contrast, replacement of positions 10 and 11 by the D-THF amino acid ent-1 gave rise to new and interesting channel properties. For the permeability ratios, the ion selectivity shifts from Eisenman I towards Eisenman III selectivity and the channels display ms-dynamics. Most remarkable is the asymmetric compound 8, which inserts selectively into a DPhPC membrane and displays voltage-directed gating dynamics.     

Model reactions for stereochemistry of Ziegler-Natta polymerization: Asymmetric hydroisomerization of α-olefins by chiral titanium tetra-alkoxides/tri-isobutyl aluminum catalytic systems

Homogeneous catalytic systems based on optically active low-molecular-weight and macromolecular titanium alcoholates and tri-isobutyl aluminum were used in the isomerization and hydrogenation of chiral and prochiral olefins. The reactions performed in a nitrogen and hydrogen atmosphere show a different behavior in regard to reaction rate, composition of reaction mixture, and stereochemical control. The catalyst based on macromolecular titanium alcoholate displays lower activity and a varying influence on the stereochemical pathway with respect to the catalysts based on low- molecular-weight alcoholates. The data obtained in both cases strongly support the absence of a stereocontrol by the growing chain in the stereoelective polymerization of racemic α-olefins by Ziegler-Natta catalysts based on optically active precursors. Finally evidence is provided in favor of the intermediate step responsible for asymmetric isomerization which does not occur via η-allyl complex.