Intercalation of tris-(2,2′-bipyridyl) ruthenium (II) in α- and γ-zirconium phosphate: synthesis, thermal behaviour and X-ray characterization

Intercalation compounds such as the ruthenium trisbipyridyl complex in inorganic layered ion-exchangers (α- and γ-zirconium phosphate) have been synthesized using the batch method. There is no loss of bipyridyl ligand from the metal ion during the exchange of the ruthenium trisbipyridyl complex in these host matrices. The materials obtained are thermally stable up to ~330 °C (γ-phase) or ~380 °C (α-phase). The complex decomposition occurs in one or more steps and at ~600 °C the complex decomposition is complete. The X-ray patterns of ruthenium materials show a new phase with an increase in the interlayer distance with respect to the initial phase. Microanalysis measurements confirm the fact that the ruthenium complex is not modified when exchanged and the complex decomposition depends on its position in the host matrices.     

Thorough evaluation of the validity of conventional enantio-gas chromatography in the analysis of volatile chiral compounds in mandarin essential oil: A comparative investigation with multidimensional gas chromatography

The present research is focused on the determination of the enantiomeric distribution of chiral compounds, contained in mandarin essential oils, by means of conventional chiral gas chromatography with flame ionization detection (enantio-GC-FID); the results attained were compared with those derived from heart-cutting multidimensional GC-mass spectrometry (MDGC/MS), to evaluate the reliability of the monodimensional technique as a tool for quality control. The Deans-switch MDGC system was equipped with two GC ovens, which were connected via a heated transfer line, a flame ionization detector (FID1) in the first dimension and a quadrupole MS as second-dimension detector. The a priori knowledge of potential co-elutions concerning target compounds (an enantiomer and an interfering compound), when using enantio-GC-FID, could enable the use of corrected enantiomer excess values. Correction factors could be calculated through a preliminary GC-FID analysis (using an apolar column), considering the peak areas of the known interferences. The method used for the calculation of a so-called “coelution correction factor” is described, along with some examples.     

Physical,Thermal and Biological Properties of Yellow Dyes with Two Azodiphenylether Groups of Anthracene

Two yellow bis-azo dyes containing anthracene and two azodiphenylether groups (BPA and BTA) were prepared, and an extensive investigation of their physical, thermal and biological properties was carried out. The chemical structure was confirmed by the FTIR spectra, while from the UV–Vis spectra, the quantum efficiency of the laser fluorescence at the 476.5 nm was determined to be 0.33 (BPA) and 0.50 (BTA). The possible transitions between the energy levels of the electrons of the chemical elements were established, identifying the energies and the electronic configurations of the levels of transition. Both crystals are anisotropic, the optical phenomenon of double refraction of polarized light (birefringence) taking place. Images of maximum illumination and extinction were recorded when the crystals of the bis-azo compounds rotated by 90° each, which confirms their birefringence. A morphologic study of the thin films deposited onto glass surfaces was performed, proving the good adhesion of both dyes. By thermal analysis and calorimetry, the melting temperatures were determined (~224–225 °C for both of them), as well as their decomposition pathways and thermal effects (enthalpy variations during undergoing processes); thus, good thermal stability was exhibited. The interaction of the two compounds with collagen in the suede was studied, as well as their antioxidant activity, advocating for good chemical stability and potential to be safely used as coloring agents in the food industry.     

Construction and evaluation of a flow injection micro-analyser based on urethane-acrylate resin

A flow injection micro-analyser with an integrated injection device and photometric detection is described. Channels measuring 205-295 μm depth by 265-290 μm maximum width were manufactured by deep UV lithography on two layers of urethane-acrylate oligomers-based photoresist. Hypodermic syringe needles (450 μm diameter) were connected to the channels for introduction of solutions into the system. Plastic optical fibres were connected to the ends of a 5.0 mm long channel, in order to conduct the light from and to a homemade photometer. The device has a total volume of 7.0 μL and three different sample volumes (0.09, 0.22 and 0.30 μL) can be inserted into the system by choosing the appropriate loop of the hydrodynamic injection approach. The micro-analyser, designed as a single line manifold, was evaluated by determining chloride in waters (mercuric thiocyanate method), and chromium (VI) in wastewater and total chromium in metallic alloys (diphenylcarbazide method). For chloride determination two micro-pumps were employed to impel the solutions, while for chromium determination this task was performed by a conventional peristaltic pump. The results obtained in all determinations did not differ significantly from the reference methods at a confidence level of 95%. In the chloride determination, a flow rate of 50 μL min⁻¹ was used, providing a sample frequency of 45 injection h⁻¹, generating ca. 0.7 mg of Hg(II) after an 8-h working day (ca. 20 mL of solution). This result suggests the potential of the micro-analyser towards the reduction of waste, following the philosophy of Green Chemistry.     

Color alteration in teeth subjected to different bleaching techniques

This study evaluated the color alteration of teeth subjected to the action of different bleaching agents and the influence of light sources commonly used in association with these products, In GI, the specimens remained immersed in artificial saliva. The specimens in GII were bleached with a 10% carbamide peroxide gel 4 hours/day during 3 weeks; the teeth in the other three groups were subjected to three sessions of three 10-min applications of 35% hydrogen peroxide gel at 7-day intervals. In GIII, no light was used, while in GIV and GV the gel was associated with a quartz-tungsten-halogen light and a LED/laser source, respectively. The teeth color was evaluated before and 7 days after the bleaching sessions by reflectance spectrophotometry. Data were analyzed statistically by ANOVA and Fisher’s test (α = 0.05), and showed that a significant color change was obtained in all treated groups. After the first week of treatment and at the end of it, the bleaching protocols showed similar results. The results of the present study indicate that association of a light source is not necessary to obtain the bleaching effect and that optimal bleaching can be achieved with all techniques tested.     

Nucleotide Analogues Bearing a C2′ or C3′-Stereogenic All-Carbon Quaternary Center as SARS-CoV-2 RdRp Inhibitors

The design of novel nucleoside triphosphate (NTP) analogues bearing an all-carbon quaternary center at C2′ or C3′ is described. The construction of this all-carbon stereogenic center involves the use of an intramoleculer photoredox-catalyzed reaction. The nucleoside analogues (NA) hydroxyl functional group at C2′ was generated by diastereoselective epoxidation. In addition, highly enantioselective and diastereoselective Mukaiyama aldol reactions, diastereoselective N-glycosylations and regioselective triphosphorylation reactions were employed to synthesize the novel NTPs. Two of these compounds are inhibitors of the RNA-dependent RNA polymerase (RdRp) of SARS-CoV-2, the causal virus of COVID-19.     

Fractionation of HDPE on quench cooling

In a previous paper we discussed co-crystallization in a LDPE/HDPE blend using TREF and DSC. As part of that study it was observed that pure HDPE showed an unexpected fractionation behavior when quench crystallized in TREF. The overall peak broadened and two peaks appeared instead of the previously observed single peak for slow cooled HDPE.The development of two peaks was observed for all commercial HDPEs investigated, independent of their melting indices and densities. TREF and GPC were used in an attempt to evaluate the origin of the two HDPE components.The authors appreciate support from CAPES-BRAZIL (C.A.F.). Additional thanks go to Dr. G. W. Knight in Dow Chemical Company for kindly providing the polymer samples and performing the GPC analysis.     

ParaHydrogen Polarized Ethyl-[1-13C]pyruvate in Water,a Key Substrate for Fostering the PHIP-SAH Approach to Metabolic Imaging

An efficient synthesis of vinyl-[1-¹³C]pyruvate has been reported, from which ¹³C hyperpolarized (HP) ethyl-[1-¹³C]pyruvate has been obtained by means of ParaHydrogen Induced Polarization (PHIP). Due to the intrinsic lability of pyruvate, which leads quickly to degradation of the reaction mixture even under mild reaction conditions, the vinyl-ester has been synthesized through the intermediacy of a more stable ketal derivative. ¹³C and ¹H hyperpolarizations of ethyl-[1-¹³C]pyruvate, hydrogenated using ParaHydrogen, have been compared to those observed on the more widely used allyl-derivative. It has been demonstrated that the spin order transfer from ParaHydrogen protons to ¹³C, is more efficient on the ethyl than on the allyl-esterdue to the larger J-couplings involved. The main requirements needed for the biological application of this HP product have been met, i. e. an aqueous solution of the product at high concentration (40 mM) with a good ¹³C polarization level (4.8 %) has been obtained. The in vitro metabolic transformation of the HP ethyl-[1-¹³C]pyruvate, catalyzed by an esterase, has been observed. This substrate appears to be a good candidate for in vivo metabolic investigations using PHIP hyperpolarized probes.