Flow systems exploiting in-line prior assays

An expert sequential injection system involving a prior assay is proposed for spectrophotometric determination of phosphate and eventually zinc in soil extracts. The result of phosphate determination is the basis for a concentration-oriented decision regarding to the need or not for zinc determination. Zinc was only determined if a threshold value (peak height corresponding to 5.0 mg l⁻¹ P) was surpassed. The methods involved formation of molybdenum blue and the Rhodamine 6G/ammonium thiocyanate/Zn²⁺ ternary complex. Variations in the threshold value were < 2% during 4 h operating periods, false responses were not verified, and the analytical time was reduced in about 30%. Precise results (R.S.D. <3% P and < 1% Zn) in agreement with spectrophotometry and flame atomic absorption spectrometry were obtained. The innovation permits faster information processing, as well as a reduction in the number of measurements, number of analytical steps, laboratorial time, and consumption of sample and reagents, thus waste generation.     

Stereoselective conjugate addition of benzyl phenylsulfonyl carbanions to enoates derived from d-mannitol

The conjugate addition of benzylic phenylsulfonyl carbanions (2a'-d') to enoates derived from d-(+)-mannitol (E- or Z-1a-c) was studied using THF and THF/HMPA as solvent. Under kinetic conditions (-78 degrees C), enoate E-1a,b led to a mixture of syn-(R,S) and anti-(S,S) adducts (55/45), and syn-(R,S) adducts were the main product obtained ( approximately 90/10) from enoate Z-1a. Under thermodynamic conditions (-78 degrees C to room temperature) syn-(R,S) adducts were also preferentially formed ( approximately 90/10), despite the geometry at the double bond in the acceptor. Enoate 1c (E/Z = 57/43), bearing an additional benzyl group at the alpha-position, also reacted with carbanions 2'a,b, under thermodynamic conditions, leading to syn-adducts in excellent de (control at the three newly generated stereogenic centers). The adducts were quantitatively transformed into the corresponding beta-gamma-disubstituted gamma-butyrolactones and alpha,beta,gamma-trisubstituted gamma-butyrolactones. (1)H NMR studies (NOE and J-coupling) of these lactones allowed us to determine their configuration at the newly generated chiral centers. The reduction of the C-S bond in adducts syn-(R,S) with Na/Hg, followed by treatment of the resulting products in aqueous acid media, led to enantioenriched beta-benzyl-gamma-hydroxymethyl-gamma-butyrolactones. The conformational equilibrium of enoates E- and Z-1b was evaluated by theoretical calculations (ab initio, MP2/6-31G), and a mechanistic rationale was proposed to explain the observed stereoselectivities.     

Electrochemical transduction on self-assembled monolayers: are covalent links essential?

Electrochemical transduction without covalent links between redox and complexant units in a complexing self-assembled monolayer has been established. The results demonstrate that transduction depends on the crown ether/ferrocene ratio and appears to be tunable.     

Copper(I) complexes with bipyridyl and phosphine ligands: a systematic study

Phosphorescent copper(I) complexes carrying 2,2'-bipyridyl derivatives and phosphine ligands have been prepared and fully characterised. The role of the bipyridyl as well as the phosphine ligands in defining the optical, as well as the chemical properties of the complexes, are discussed. The light emission of these complexes is investigated as a function of the molecular geometry: rigid complexes with restricted freedom to rearrange in the excited state are found to show a quantum yield of phosphorescence one order of magnitude higher than those complexes with no steric constraint. The complexes have been extruded in a polymer matrix as a proof of principle of their processability.     

Halloysite clay nanotubes and platinum nanoparticles dispersed in ionic liquid applied in the development of a catecholamine biosensor

Halloysite clay nanotubes were used as a support for the immobilization of the enzyme peroxidase from clover sprouts (Trifolium), and employed together with platinum nanoparticles in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (Pt-BMI·PF(6)) in the development of a new biosensor for the determination of catecholamines by square-wave voltammetry. Under optimized conditions, the analytical curves showed detection limits of 0.05, 0.06, 0.07, 0.12 μM for dopamine, isoproterenol, dobutamine and epinephrine, respectively. The biosensor demonstrated high sensitivity, good repeatability and reproducibility, and long-term stability (18% decrease in response over 150 days). A recovery study of dopamine in pharmaceutical samples gave values from 97.5 to 101.4%. The proposed biosensor was successfully applied to the determination of dopamine in pharmaceutical samples, with a maximum relative error of ±1.0% in relation to the standard (spectrophotometric) method. The good analytical performance of the proposed method can be attributed to the efficient immobilization of the peroxidase in the nanoclay, and the facilitation of electron transfer between the protein and the electrode surface due to the presence of the Pt nanoparticles and ionic liquid.     

Simultaneous quantification of morphine and cocaine in hair samples from drug addicts by GC-EI/MS

The development of analytical techniques that enable the use of hair as an alternative matrix for the analysis of drugs of abuse is useful for confirming the exposure in a larger time window (weeks to months, depending on the length of the hair shaft). In the present study a methodology aimed at the simultaneous quantification of cocaine and morphine in human hair was developed and validated. After decontamination, hair samples (20?mg) were incubated with a mixture of methanol/hydrochloric acid (2:1) at 65?°C overnight (~16?h) in order to extract the drugs of the matrix. Purification was performed by solid-phase extraction using mixed-mode extraction cartridges. After derivatization with N-methyl-N-(trimethylsilyl) trifluoroacetamide, blank, standards and samples were analyzed by gas chromatography/electron impact-mass spectrometry (GC-EI/MS). The method proved to be selective, as there were no interferences of endogenous compounds with the same retention time as cocaine, morphine and ethylmorphine (internal standard). The regression analysis for both analytes showed linearity in the range 0.25-10.00?ng/mg with correlation coefficients ranging from 0.9989 to 0.9991. The coefficients of variation oscillated between 0.83 and 14.60%. The limits of detection were 0.01 and 0.02?ng/mg, and the limits of quantification were 0.03 and 0.06?ng/mg for cocaine and morphine, respectively. The proposed GC-EI/MS method provided an accurate and simple assay with adequate precision and recovery for the quantification of cocaine and morphine in hair samples. The proof of applicability was performed in hair samples obtained from drug addicts enrolled in a Regional Detoxification Treatment Center. The importance of hair samples is highlighted, since positives results were obtained when urine immunoassay analyses were negative. Copyright ? 2012 John Wiley & Sons, Ltd.     

Accessibility and Selective Stabilization of the Principal Spin States of Iron by Pyridyl versus Phenolic Ketimines: Modulation of the (6)A(1) ↔ (2)T(2) Ground-State Transformation of the [FeN(4)O(2)](+) Chromophore

Several potentially tridentate pyridyl and phenolic Schiff bases (apRen and HhapRen, respectively) were derived from the condensation reactions of 2-acetylpyridine (ap) and 2'-hydroxyacetophenone (Hhap), respectively, with N-R-ethylenediamine (RNHCH(2)CH(2)NH(2), Ren; R = H, Me or Et) and complexed in situ with iron(II) or iron(III), as dictated by the nature of the ligand donor set, to generate the six-coordinate iron compounds [Fe(II)(apRen)(2)]X(2) (R = H, Me; X(-) = ClO(4)(-), BPh(4)(-), PF(6)(-)) and [Fe(III)(hapRen)(2)]X (R = Me, Et; X(-) = ClO(4)(-), BPh(4)(-)). Single-crystal X-ray analyses of [Fe(II)(apRen)(2)](ClO(4))(2) (R = H, Me) revealed a pseudo-octahedral geometry about the ferrous ion with the Fe(II)-N bond distances (1.896-2.041 ?) pointing to the (1)A(1) (d(π)(6)) ground state; the existence of this spin state was corroborated by magnetic susceptibility measurements and M?ssbauer spectroscopy. In contrast, the X-ray structure of the phenolate complex [Fe(III)(hapMen)(2)]ClO(4), determined at 100 K, demonstrated stabilization of the ferric state; the compression of the coordinate bonds at the metal center is in accord with the (2)T(2) (d(π)(5)) ground state. Magnetic susceptibility measurements along with EPR and M?ssbauer spectroscopic techniques have shown that the iron(III) complexes are spin-crossover (SCO) materials. The spin transition within the [Fe(III)N(4)O(2)](+) chromophore was modulated with alkyl substituents to afford two-step and one-step (6)A(1) ? (2)T(2) transformations in [Fe(III)(hapMen)(2)]ClO(4) and [Fe(III)(hapEen)(2)]ClO(4), respectively. Previously, none of the X-salRen- and X-sal(2)trien-based ferric spin-crossover compounds exhibited a stepwise transition. The optical spectra of the LS iron(II) and SCO iron(III) complexes display intense d(π) → p(π)* and p(π) → d(π) CT visible absorptions, respectively, which account for the spectacular color differences. All the complexes are redox-active; as expected, the one-electron oxidative process in the divalent compounds occurs at higher redox potentials than does the reverse process in the trivalent compounds. The cyclic voltammograms of the latter compounds reveal irreversible electrochemical generation of the phenoxyl radical. Finally, the H(2)salen-type quadridentate ketimine H(2)hapen complexed with an equivalent amount of iron(III) to afford the μ-oxo-monobridged dinuclear complex [{Fe(III)(hapen)}(2)(μ-O)] exhibiting a distorted square-pyramidal geometry at the metal centers and considerable antiferromagnetic coupling of spins (J ≈ -99 cm(-1)).     

Enantioselective isotactic alternating copolymerization of styrene and 4-methylstyrene with carbon monoxide catalyzed by a cationic bioxazoline pd(II) complex

The cationic bioxazoline Pd(II) complex 2 catalyzes the alternating copolymerization of carbon monoxide with styrene and 4-methylstyrene, respectively, to yield a highly isotactic optically active polymer at room temperature and low carbon monoxide pressure (1–4 atm).     

Measurement uncertainty of food carotenoid determination

For consistent interpretation of an analytical method result it is necessary to evaluate the confidence that can be placed in it, in the form of a measurement uncertainty estimate. The Guide to the expression of Uncertainty in Measurement issued by ISO establishes rules for evaluating and expressing uncertainty. Carotenoid determination in food is a complex analytical process involving several mass transfer steps (extraction, evaporation, saponification, etc.), making difficult the application of these guidelines. The ISO guide was interpreted for analytical chemistry by EURACHEM, which includes the possibility of using intra- and interlaboratory information. Measurement uncertainty was estimated based on laboratory validation data, including precision and method performance studies, and also, based on laboratory participation in proficiency tests. These methods of uncertainty estimation were applied to analytical results of different food matrices of fruits and vegetables. Measurement uncertainty of food carotenoid determination was 10–30% of the composition value in the great majority of cases. Higher values were found for measurements near instrumental quantification limits (e.g. 75% for β-cryptoxanthin, and 99% for lutein, in pear) or when sample chromatograms presented interferences with the analyte peak (e.g. 44% for α-carotene in orange). Lower relative expanded measurement uncertainty values (3–13%) were obtained for food matrices/analytes not requiring the saponification step. Based on these results, the saponification step should be avoided if food carotenoids are not present in the ester form. Food carotenoid content should be expressed taking into account the measurement uncertainty; therefore the maximum number of significant figures of a result should be 2.