Structure–activity relationships of anthocyanidin glycosylation

This paper summarizes the main achievements about the structure–activity relationships of anthocyanidin glycosylation. Anthocyanidin glycosylation is the essential step of anthocyanin biosynthesis and also the prerequisite of the further modifications of anthocyanins, which is jointly characterized by the glycosylation site, the type and number of the glycosyl as well as the glycosidic bond type. It generally enhances the stability, results in the hypsochromic effect and blueing, decreases the bioavailability and anticancer activity, and decreases, increases, or does not change the antioxidant activity of the anthocyanidins or anthocyanins, which is synergetically determined by the glycosylation site and the type and number of the glycosyl. Thereinto, in nature, the blue hues caused by the glycosylation may also be reinforced by the formation of the anthocyanic vacuolar inclusions. This review could provide a reference for the research of the structure-optimizing and function-exploiting of anthocyanins.     

Sampling and digestion of waste mobile phones printed circuit boards for Cu,Pb, Ni,and Zn determination

Sampling is the most important procedure in arriving at the value of an electronic scrap. Inappropriate sampling makes other procedures, including assaying, valueless, as the sample must really represent the electronic scrap from which it was taken. The aim of this study was to develop the procedure to investigate the composition of heterogeneous printed circuit boards (PCBs) material and to show its applicability as well as its related limitations. The contents of Cu, Pb, Ni, and Zn in PCBs from wasted mobile phones were determined. Mixtures of aqua regia, hydrogen peroxide and hydrofluoric acid were applied to sample digestion. Open and closed vessel wet digestion with or without heating and microwave-assisted one was realized. For these purposes different sample amounts (0.2, 0.4, and 0.5 g) were applied and on the basis of calculated relative standard deviation values (RSD), the precision of repeated the most effective digestion was evaluated. The microwave-assisted wet digestion and mixture of aqua regia and hydrogen peroxide was found as the most effective one of the compared mixtures and applied conditions. A sample amount of 0.5 g was found as the most suitable. RSD values confirm the importance of electronic waste material sample preparation.     

高分子模板调控不同形貌氧化亚铜的仿生合成

采用聚丙烯酰胺(PAM)为软模板,在CuSO4、Na2SO3体系中调控合成了片状、海胆状、一维线、针状聚集体氧化亚铜晶体。研究了不同浓度Cu2+、不同PAM含量及不同温度对晶体生长的影响。结果表明,PAM促使氧化亚铜异相成核,氧化亚铜形貌随PAM质量分数的变化而变化:当c(Cu2+)=0.5mol.L-1时,PAM质量分数为3.0%(常温引入体系),产物主要为片状晶体;PAM质量分数为1.0%、3.0%时(高温引入体系),分别获得一维线状、海胆状晶体;当Cu2+浓度为0.1 mol.L-1时,体系中高温引入质量分数3.0%的PAM,得到片层状晶体;当Cu2+浓度为0.3、0.4 mol.L-1时,得到针状聚集体氧化亚铜晶体。分别用X射线粉末衍射、冷场发射扫描电子显微镜和激光粒度仪对所制备的产品进行了表征。     

Enantiomeric separations of four basic drugs containing N-alkyl groups by a RP-HPLC system using SBE-β-CD as chiral mobile phase additive

The chiral separations of four pharmaceutical racemates which contain N-alkyl groups were satisfactorily resolved using SBE-β-CD as a chiral mobile phase additive(CMPA)in a RP-HPLC system(the resolution is 2.701 for ondansetron hydrochloride,1.996 for sulpiride,1.293 for clenbuterol hydrochloride and 0.816 for omeprazole).In addition,the effects of different parameters such as CD type and CD concentration were investigated.The separation mechanism arises through the combination of several potential interactions,including electrostatic interactions as well as hydrogen bonding interactions and hydrophobic inclusion interactions,which allow for the SBE-β-CD–drug complexation with strong stereoselectivity and stability.The resolution also relates to the number and location of N atoms in the enantiomers.This method will be applicable to the isolation of various types of biologically important enantiomers containing N-alkyl groups.     

From Zero‐dimensional to One‐dimensional: Use of Metal‐­Ligand Affinity in Supramolecular Assembly

The self‐assembly of 4 ‐ MTPP [ 4 ‐ MTPP = 2‐(methylthio)‐4‐(pyridin‐4‐yl)pyrimidine] with Cu(NO₃)₂ and AgNO₃ was structurally investigated. For Cu(NO₃)₂, a discrete mononuclear Cu^II coordination compound, [Cu( 4 ‐ MTPP )₂(NO₃)₂] ( 1 ), resulted that is exclusively based on Cu–N coordination. For AgNO₃, a unique one‐dimensional double‐chain structure ( 2 ) was obtained with the Ag–N distances varying from 2.181(9) to 2.223(9) Å, and the average Ag–S distance being 2.98 Å. Compared to zero‐dimensional 1 , the extension to one‐dimensional 2 is considered to result from the specific affinity between Ag⁺ and the ligand 4 ‐ MTPP that is attributed to the strong coordinating tendency of silver for aromatic nitrogen and thioether sulfur atoms.     

2 D Manganese Vanadate Nanoflakes as High‐Performance Anode for Lithium‐Ion Batteries

Nanometer‐sized flakes of MnV₂O₆ were synthesized by a hydrothermal method. No surfactant, expensive metal salt, or alkali reagent was used. These MnV₂O₆ nanoflakes present a high discharge capacity of 768 mA h g^?1 at 200 mA g^?1, good rate capacity, and excellent cycling stability. Further investigation demonstrates that the nanoflake structure and the specific crystal structure make the prepared MnV₂O₆ a suitable material for lithium‐ion batteries.     

A novel two‐dimensional CdII coordination polymer: poly[aqua[μ4‐2‐(4‐carboxylatobenzoyl)benzoato]cadmium(II)]

The title Cd^II coordination framework, [Cd(C₁₅H₈O₅)(H₂O)]_n or [Cd(bpdc)(H₂O)]_n [H₂bpdc is 2‐(4‐carboxybenzoyl)benzoic acid], has been prepared and characterized using IR spectroscopy, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. Each Cd^II centre is six‐coordinated by two O atoms from one 2‐(4‐carboxylatobenzoyl)benzoate (bpdc²⁻) ligand in chelating mode, three O‐donor atoms from three other bpdc²⁻ anions and one O atom from a coordinated water molecule in an octahedral coordination environment. Two crystallographically equivalent Cd^II cations are bridged by one O atom of the 2‐carboxylate group of one bpdc²⁻ ligand and by both O atoms of the 4‐carboxylate group of a second bpdc²⁻ ligand to form a binuclear [(Cd)₂(O)(OCO)] secondary building unit. Adjacent secondary building units are interlinked to form a one‐dimensional [Cd(OCO)₂]_n chain. The bpdc²⁻ ligands link these rod‐shaped chains to give rise to a complex two‐dimensional [Cd(bpdc)]_n framework with a 4,4‐connected binodal net topology of point symbol {4³.6².8}. The compound exhibits a strong fluorescence emission and typical ferroelectric behaviour in the solid state at room temperature.     

有机化学教学中的“三融合、二反思、四进阶”创新教学模式*

为培养出新时代创新人才,构建的“三融合、二反思、四进阶”教学模式有效提升了学生们科技创新能力。依据有机化学特点,创设科学发现情境,通过核心知识点网融合(挑战度)、理论实践交叉融合(高阶性)和化学思政融合(课程思政)“三融合”策略,不断激发学生们学习兴趣;通过教师反思、学生反思的“二反思”过程不断优化教学过程,改善教学效果;最终使具有不同知识层次的学生通过“四进阶”教学策略逐步提升科创能力(创新性)。     

直流电晕充电下环氧树脂表面电位衰减特性的研究

介质材料表面电荷的积累和衰减行为是制约众多高压直流电力设备研制的关键因素. 薄片状介质试样的表面电荷密度与表面电位近似呈线性关系, 因此常通过表面电位衰减行为研究表面电荷的衰减特性. 基于电晕充电、表面电荷沉积和脱陷、介质体内单极性电荷输运等3个物理过程, 建立表面电位动态响应的物理模型. 通过计算环氧树脂的表面电位衰减行为, 得到栅极电压、相对介电常数和体电导率等对其表面电位衰减特性的影响. 栅极电压越高, 表面电位的衰减速度越快; 环氧树脂材料参数典型值(相对介电常数3.93, 体电导率10^-14 S· m^-1)下, 归一化表面电位的衰减速率随时间变化的曲线可拟合为分段幂函数, 其中, 分段幂函数的特征时间、指数系数与栅极电压分别呈幂函数和线性变化关系. 相对介电常数越大, 表面电位的衰减速度越慢; 环氧树脂相对介电常数典型范围(3–4)内, 表面电位衰减时间常数由1720 s增大到2540 s, 两者呈线性关系. 体电导率越大, 表面电位的衰减速度越快; 环氧树脂体电导率典型范围(10^-15–10^-13 S· m^-1)内, 表面电位衰减时间常数由24760 s 减小到260 s, 两者呈幂函数变化关系.     

超薄骨架有序介孔CdS/NiS的制备及光催化产氢性能

采用有序介孔氧化硅为硬模板, 通过纳米浇筑法制备了由螺旋骨架构建的有序介孔硫化镉(CdS)光 催化材料. 该光催化材料具有约5 nm厚的超薄骨架和大的比表面积(238 m²/g), 能有效缩短光催化反应中 光生电荷迁移到表面进行反应的距离并同时提供更多的反应活性位点, 从而增强光催化性能. 通过原位化学沉积法将不同量的助催化剂硫化镍(NiS)沉积到有序介孔CdS表面, 得到了一系列超薄骨架有序介孔CdS/NiS复合光催化材料. 可见光照射下的光催化产氢活性测试结果表明, 负载适量NiS的有序介孔CdS具有显著增强的光催化产氢活性(3.84 mmol?h^-1?g^-1), 约为负载相同量NiS的普通商业化CdS材料(0.22 mmol?h^-1?g^-1)的17.5倍.