Elastic instability of the nano-structured state as an intrinsic probe to study the early formation stages of sol–gel derived (Pb<Subscript>1-x</Subscript>Ca<Subscript>x</Subscript>)TiO<Subscript>3</Subscript> thin films

A novel method to investigate the early formation stages of polycrystalline (Pb_1-xCa_x)TiO₃ (PCT) perovskite films by means of traditional Brillouin and micro-Brillouin spectroscopy (BS, mBS) is described in the present work. The films were prepared by chemical solution deposition (CSD) onto oxidized (100)Si substrates and treated at temperatures between 350–650 °C by rapid thermal processing (RTP). The elastic instability observed by Brillouin spectroscopy at the nano-structured state of the PCT films was used here to determine their crystallization temperatures. Coexistence of different nanocrystalline phases (e.g., pyrochlore, perovskite) in the films could also be detected by this technique. The reliability of these results is demonstrated by complementary information obtained by X-ray diffraction (XRD) and scanning force microscopy (SFM). The effects of the annealing temperature and of the Ca²⁺ content on the crystallization process of these films are also discussed. PACS 78.35.+c; 77.84.-s; 61.82.Rx     

Practical aspects associated with location planning for maternal and perinatal assistance in Brazil

A study has been carried out aimed at reducing perinatal mortality in the municipality of Rio de Janeiro through a better distribution of health care facilities. The algorithmic aspects are detailed elsewhere and here the emphasis is on practical issues and difficulties encountered. A 3-level hierarchical model was developed. Both uncapacitated and capacitated versions are briefly described together with some results based on actual data. The project brought to light many contradictions between OR theory and practice in developing countries and, unfortunately, the models developed were not implemented by the municipality health authorities. Possible reasons for this outcome are analysed.     

Coupled Thermo-Hydro-Mechanical and Chemical Analysis of Expansive Clay Subjected to Heating and Hydration

A fully coupled formulation combining reactive transport and an existing thermo-hydro-mechanical (THM) code is presented. Special attention has been given to phenomena likely to be encountered in clay barriers used as part of containment systems of nuclear waste. The types of processes considered include hydrolysis, complex formation, oxidation/reduction reactions, acid/base reactions, precipitation/dissolution of minerals and cation exchange. Both kinetically-controlled and equilibrium-controlled reactions have been incorporated. The total analytical concentrations (including precipitated minerals) are adopted as basic transport variables and chemical equilibrium is achieved by minimizing Gibbs Free Energy. The formulation has been incorporated in a general purpose computer code capable of performing numerical analysis of engineering problems. A validation exercise concerning a laboratory experiment involving the heating and hydration of an expansive compacted clay is described.     

Mercury removal from aqueous solution and flue gas by adsorption on activated carbon fibres

The use of two activated carbon fibres, one laboratorial sample prepared from a commercial acrylic textile fibre and one commercial sample of Kynol^®, as prepared/received and modified by reaction with powdered sulfur and H₂S gas in order to increase the sulfur content were studied for the removal of mercury from aqueous solution and from flue gases from a fluidized bed combustor. The sulfur introduced ranged from 1 to 6 wt.% depending on the method used. The most important parameter for the mercury uptake is the type of sulfur introduced rather than the total amount and it was found that the H₂S treatment of ACF leads to samples with the highest mercury uptake, despite the lower sulfur amount introduced. The modified samples by both methods can remove HgCl₂ from aqueous solutions at pH 6 within the range 290-710 mg/g (ACF) which can be favourably compared with other studies already published. The use of a filter made with an activated carbon fibre modified by powdered sulfur totally removed the mercury species present in the flue gases produced by combustion of fossil fuel.     

On a recursive method for the estimation of unknown parameters of partially observed chaotic systems

We investigate a recently proposed method for on-line parameter estimation and synchronization in chaotic systems. This novel technique has been shown effective to estimate a single unknown parameter of a primary chaotic system with known functional form that is only partially observed through a scalar time series. It works by periodically updating the parameter of interest in a secondary system, with the same functional form as the primary one but no explicit coupling between their dynamic variables, in order to minimize a suitably defined cost function. In this paper, we review the basics of the method, and investigate its robustness and new extensions. In particular, we study the performance of the novel technique in the presence of noise (either observational, i.e., an additive contamination of the observed time series, or dynamical, i.e., a random perturbation of the system dynamics) and when there is a mismatch between the primary and secondary systems. Numerical results, including comparisons with other techniques, are presented. Finally, we investigate the extension of the original method to perform the estimation of two unknown parameters and illustrate its effectiveness by means of computer simulations.     

Enhancing molecular formation in a Rb-MOT

In this paper, we report observation of an enhancement of the ground state molecule Rb₂ formation in a Rb magneto-optical trap due to a photoassociation laser. Such an enhancement effect is due to flux enhancement of atomic pairs at short internuclear distances. Our experimental observations consist in the measurement of the molecular formation rate constant due to a probe laser as a function of the trap laser intensity. The results are compared with a simple semi-classical model, showing good agreement. We conclude that the production of cold Rb₂ may be enhanced using appropriate laser parameters; this may be useful for future experiments involving production and trapping of ultracold ground state molecules.     

Direction of magnetization and domain wall mobility in (Dy,Y)Fe2

Magnetization measurements in the (Dy _x Y_1−x )Fe₂ intermetallic compounds show evidence of blocking of domain wall motion. This effect is a function of concentrationx. The direction of magnetization is also dependent on the Dy concentration. We have used the Mossbauer spectroscopy of⁵⁷Fe to verify the direction of magnetization in the series as a function ofx and temperature. The results show that this change in easy direction occurs at higher temperatures than those where the blocking is detected through DC magnetization measurements. supported by RHAE/SCT.     

Alloy formation in mechanically activated mixtures

The physical mixtures of hydroxocarbonates of Cu and Ni with aluminium were activated using a laboratory planetary mill. The chemical reactions and alloy formations as the effects of grinding were followed by the phase analysis of solid products based on the thermogravimetry and X-ray diffractometry. Experimental evidence indicates that the nature of reactions and products of mechanical activation was dependent on the amount of aluminium and time of grinding. This revised version was published online in July 2006 with corrections to the Cover Date.     

Interpolation of Bilinear Operators Between Quasi-Banach Spaces

We study interpolation, generated by an abstract method of means, of bilinear operators between quasi-Banach spaces. It is shown that under suitable conditions on the type of these spaces and the boundedness of the classical convolution operator between the corresponding quasi-Banach sequence spaces, bilinear interpolation is possible. Applications to the classical real method spaces, Calderón-Lozanovsky spaces, and Lorentz-Zygmund spaces are presented. The author is supported by the National Science Foundation under grant DMS 0099881. The author is supported by KBN Grant 1 P03A 013 26.