Plasma Thermal Conversion of Methane to Acetylene

This paper describes a re-examination of a known process for the direct plasma thermal conversion of methane to acetylene. Conversion efficiencies (% methane converted) approached 100% and acetylene yields in the 90–95% range with 2–4% solid carbon production were demonstrated. Specificity for acetylene was higher than in prior work. Improvements in conversion efficiency, yield, and specificity were due primarily to improved injector design and reactant mixing, and minimization of temperature gradients and cold boundary layers. At the 60-kilowatt scale cooling by wall heat transfer appears to be sufficient to quench the product stream and prevent further reaction of acetylene resulting in the formation of heavier hydrocarbon products or solid carbon. Significantly increasing the quenching rate by aerodynamic expansion of the products through a converging–diverging nozzle led to a reduction in the yield of ethylene but had little effect on the yield of other hydrocarbon products. While greater product selectivity for acetylene has been demonstrated, the specific energy consumption per unit mass of acetylene produced was not improved upon. A kinetic model that includes the reaction mechanisms resulting in the formation of acetylene and heavier hydrocarbons, through benzene, is described.     

Synthesis and reactivity of dimeric Ar'TlTlAr' and trimeric (Ar"T1)3 (Ar', Ar" = bulky terphenyl group) thallium(I) derivatives: Tl(I)-Tl(I) bonding in species ligated by monodentate ligands

The synthesis and characterization of three new organothallium(I) compounds are reported. Reaction of (Ar'Li)(2) (Ar' = C(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2)) and Ar"Li (Ar" = C(6)H(3)-2,6-(C(6)H(3)-2,6-Me(2))(2)) with TlCl in Et(2)O afforded (Ar'Tl)(2) (1) and (Ar' 'Tl)(3) (2). The "dithallene" 1 is the heaviest group 13 dimetallene and features a planar, trans-bent structure with Ar'Tl-Tl = 119.74(14) degrees and Tl-Tl = 3.0936(8) A. Compound 2 is the first structurally characterized neutral, three-membered ring species of formula c-(MR)(3) (M = Al-Tl; R = organo group). The Tl(3) ring has Tl-Tl distances in the range ca. 3.21-3.37 A as well as pyramidal Tl geometries. The Tl-Tl bonds in 1 and 2 are outside the range (2.88-2.97 A) of Tl-Tl single bonds in R(2)TlTlR(2) compounds. The weak Tl-Tl bonding in 1 and 2 leads to their dissociation into Ar'Tl and Ar' 'Tl monomers in hexane. The Ar'Tl monomer behaves as a Lewis base and readily forms a 1:1 donor-acceptor complex with B(C(6)F(5))(3) to give Ar'TlB(C(6)F(5))(3), 3. Adduct 3 features an almost linear thallium C(ipso)-Tl-B angle of 174.358(7) degrees and a Tl-B distance of 2.311(2) A, which indicates strong association. Treatment of 1 with a variety of reagents resulted in no reactions. The lower reactivity of 1 is in accord with the reluctance of Tl(I) to undergo oxidation to Tl(III) due to the unreactive character of the 6s(2) electrons.     

Templating and selection in the formation of macrocycles containing [[P(micro-NtBu)(2)](micro-NH)](n) frameworks: observation of halide ion coordination

Amination of [ClP(micro-NtBu)](2) (1) using NH(3) in THF gives the cyclophospha(III)zane dimer [H(2)NP(micro-NtBu)](2) (2), in good yield. (31)P NMR spectroscopic studies of the reaction of 1 with 2 in THF/Et(3)N show that almost quantitative formation of the cyclic tetramer [[P(micro-NtBu)](2)(micro-NH)](4) (3) occurs. The remarkable selectivity of this reaction can (in part) be attributed to pre-organisation of 1 and 2, which prefer cis arrangements in the solid state and solution. The macrocycle 3 can be isolated in yields of 58-67 % using various reaction scales. The isolation of the major by-product of the reaction (ca. 0.5-1 % of samples of 3), the pentameric, host-guest complex [[P(micro-NtBu)(2)](2)(micro-NH)](5)(HCl).2 THF] (4.2 THF), gives a strong indication of the mechanism involved. In situ (31)P NMR spectroscopic studies support a stepwise condensation mechanism in which Cl(-) ions play an important role in templating and selection of 3 and 4. Amplification of the pentameric arrangement occurs in the presence of excess LiX (X=Cl, Br, I). In addition, the cyclisation reaction is solvent- and anion-dependent. The X-ray structures of 2 and 4.2 THF are reported.     

Electronic spectroscopy of small toluene clusters

Small clusters of toluene(n) (n = 1-8) were created in a supersonic expansion of toluene with argon as a carrier gas. Mass-selected resonance enhanced multiphoton ionization spectra of these clusters were recorded for each n. For the dimer, the appearance of the spectrum under warm and very cold conditions was studied. We discuss previous results in the light of the present spectra. For n>2, the spectra resemble very closely that of the dimer.     

Elucidation of the pore structure of SBA-2 using Monte Carlo simulation to interpret experimental data for the adsorption of light hydrocarbons

We have measured the adsorption of methane and ethane to high pressure on SBA-2, a structured mesoporous silica composed of spheres connected by narrow channels. The experimental data were analyzed by carrying out Monte Carlo simulations of adsorption in pore structure models of different complexity and then adjusting the parameters of the models to match the Monte Carlo results to the experimental data. We found that a model based on single-sized spherical cavities was inadequate and that it is necessary to explicitly account for the interconnecting channels. Further, we found that despite the basic regularity of the SBA-2 structure, it is necessary to allow for a distribution of the sizes of both the cavities and the channels. These size distributions were obtained by fitting the parameters of the model to the experimental adsorption data, revealing detailed structural information not previously known for this material. The channels were found to be 5-15 A in diameter, while the cavities were 40-50 A in diameter. There is some evidence that the distribution of channel sizes leads to a percolation effect whereby the pore structure is not equally accessible to all adsorptives.     

Synthesis of functionalized 3-pyridyl methyl ketones

A synthesis of 3-pyridyl methyl ketones is described that employs a palladium-catalyzed olefination of 3-bromopyridines with butyl vinyl ether followed by acid hydrolysis of the intermediate pyridyl vinyl ether in situ. This method has been applied to bromoquinoline substrates as well. The reaction is compatible with a variety of functional groups.     

Classification of gasoline data obtained by gas chromatography using a piecewise alignment algorithm combined with feature selection and principal component analysis

A fast and objective chemometric classification method is developed and applied to the analysis of gas chromatography (GC) data from five commercial gasoline samples. The gasoline samples serve as model mixtures, whereas the focus is on the development and demonstration of the classification method. The method is based on objective retention time alignment (referred to as piecewise alignment) coupled with analysis of variance (ANOVA) feature selection prior to classification by principal component analysis (PCA) using optimal parameters. The degree-of-class-separation is used as a metric to objectively optimize the alignment and feature selection parameters using a suitable training set thereby reducing user subjectivity, as well as to indicate the success of the PCA clustering and classification. The degree-of-class-separation is calculated using Euclidean distances between the PCA scores of a subset of the replicate runs from two of the five fuel types, i.e., the training set. The unaligned training set that was directly submitted to PCA had a low degree-of-class-separation (0.4), and the PCA scores plot for the raw training set combined with the raw test set failed to correctly cluster the five sample types. After submitting the training set to piecewise alignment, the degree-of-class-separation increased (1.2), but when the same alignment parameters were applied to the training set combined with the test set, the scores plot clustering still did not yield five distinct groups. Applying feature selection to the unaligned training set increased the degree-of-class-separation (4.8), but chemical variations were still obscured by retention time variation and when the same feature selection conditions were used for the training set combined with the test set, only one of the five fuels was clustered correctly. However, piecewise alignment coupled with feature selection yielded a reasonably optimal degree-of-class-separation for the training set (9.2), and when the same alignment and ANOVA parameters were applied to the training set combined with the test set, the PCA scores plot correctly classified the gasoline fingerprints into five distinct clusters.     

Morphological characterization of elastin-mimetic block copolymers utilizing cryo- and cryoetch-HRSEM.

Elastin-mimetic block copolymers were produced by genetic engineering. Genetically driven synthesis permitted control of the final physiochemical characteristics of the block copolymers. We designed BB and BAB block copolymers in which the A-block was hydrophilic and the B-block was hydrophobic. By designing the copolymers in this manner, it was proposed that they would self-assemble into micellar aggregates that, at high concentration, would form thermoreversible hydrogels. To analyze the three-dimensional fine surface morphology of the copolymers, to the resolution level of a few nanometers, we employed cryo-HRSEM. This method provided vast expanses of the specimen in its frozen hydrated state for survey. In our initial cryo-HRSEM studies, we observed the protein filaments and micelles surrounded by lakes of vitreous ice. Upon examination at low and intermediate magnifications, there was an extensive honeycomb-like filamentous network. To delineate the fine morphology of the hydrogel network at high magnification and to greater depths, we cryoetched away unbound water from the sample surface, in high vacuum, prior to chromium deposition. By using this technique, we were able to visualize for characterization purposes the fine fibril networks formed from the micellar aggregates over the surface of the hydrogel.     

Proteomic analysis of simulated occupational jet fuel exposure in the lung

We analyzed protein expression in the cytosolic fraction prepared from whole lung tissue in male Swiss-Webster mice exposed 1 h/day for seven days to aerosolized JP-8 jet fuel at concentrations of 1000 and 2500 mg/m3, simulating military occupational exposure. Lung cytosol samples were solubilized and separated via large scale, high resolution two-dimensional electrophoresis (2-DE) and gel patterns scanned, digitized and processed for statistical analysis. Significant quantitative and qualitative changes in tissue cytosol proteins resulted from jet fuel exposure. Several of the altered proteins were identified by peptide mass fingerprinting, confirmed by sequence tag analysis, and related to impaired protein synthetic machinery, toxic/metabolic stress and detoxification systems, ultrastructural damage, and functional responses to CO2 handling, acid-base homeostasis and fluid secretion. These results demonstrate a significant but comparatively moderate JP-8 effect on protein expression and corroborate previous morphological and biochemical evidence. Further molecular marker development and mechanistic inferences from these observations await proteomic analysis of whole tissue homogenates and other cell compartment, i.e., mitochondria, microsomes, and nuclei of lung and other targets.     

The electronic structure of small lithium clusters

Ab initio molecular orbital calculations using the STO-6G and STO6-21G basis sets have been performed for the cluster series Li _n ⁺ , Li _n , and Li _n ^– (wheren=2–7). Thirty-two optimized structures are discussed and reported, many of which (especially for the anionic structures) have not yet been considered. The calculations suggest that for all three species the optimum geometries are planar. Of the two levels of theories that were investigated, STO-6G//STO-6G and STO6-21G//STO-6G, the latter hybrid theory was found to be less reliable. In particular, for the anionic structures these calculations should provide a platform from which more sophisticated, i.e., configuration interaction, geometry optimization can be performed.