Quantitation of homoharringtonine in plasma by high-performance liquid chromatography with amperometric detection

A high-performance liquid chromatographic procedure was developed for the quantitation of homoharringtonine in plasma. Harringtonine was used as an internal standard, and 1 ml of sample was required. The single-step extraction with dichloromethane resulted in almost 100% recovery for homoharringtonine and harringtonine. Analysis was performed on a reversed-phase CN column with amperometric detection. Chromatography was completed in 12 min. At an oxidation potential of +1.0 V, the detection limit was 1 ng/ml at a signal-to-noise ratio of 2. The mean analytical recovery for homoharringtonine was 99.5%. The within-run precision and between-run precision were both less than 11%. The method is equally applicable for plasma or serum, and it has been demonstrated to be applicable for study of the pharmacokinetics of homoharringtonine in patients suffering from acute non-lymphocytic leukaemia.     

Poly(vinyl chloride)-paste/clay nanocomposites: Investigation of thermal and morphological characteristics

The paper concentrates on poly(vinyl chloride) - PVC - from the point of nanocomposite characterisation through thermal degradation of samples, evolution of the changes caused by elevating temperature using TGA, FTIR and Congo Red methods combined with morphological characterisation by XRD and TEM analyses. A novel method of PVC-paste/nanocomposite preparation while processing was used. During preparation, PVC plasticizer was mixed with clay, both natural and organophilic, and the suspension was then compounded with the other components. Two factors were followed: effect of shearing alone, and in combination with temperature. As is presented, the type of nano-filler and its chemical modifier have obvious influence on final properties either thermal or morphological. Presented contribution follows previous part of investigation and brings further information from PVC-paste/nanocomposite field.     

UV laser induced desorption of CsI and RbI ion clusters

Experimental results of laser sputtering of cesium and rubidium iodide secondary ions are presented. A TOF mass spectrometer, operating in linear mode, continuous extraction for positive or negative ions, was used for the analysis of (CsI)_nCs⁺, (CsI)_nI⁻, (RbI)_nRb⁺ and (RbI)_nI⁻ ion emission as a function of the laser irradiance. Experimental data show that the cluster ion emission yields decrease exponentially with n, for all the laser irradiances applied. Theoretical analysis of the clusters structure was performed using density functional theory at the B3LYP/LACV3P level, for the positive and negative cluster series. A quasi-equilibrium evolution of the clusters is proposed to extract a parameter characteristic of the cluster recombination process: the effective temperature. The hypothesis of the atomic species’ recombination (during the expansion of a high density highly ionized cloud) leading to cluster formation is confirmed to some extent in a second set of experiments: the UV laser ablation of a mixed and non-mixed cesium iodide and potassium bromide targets. These experiments show that the emission yields contain contributions from both the recombination process and from the sample stoichiometry, even for high laser irradiances.     

New Plasmon Waveguides Composed of Twin Metal Wedges with a Nano Gap

We have numerically shown the existence of coupled wedge plasmons (CWPs) which propagates along a nano gap of a twin metal wedge. The CWPs are formed by wedge plasmons which can interact with each other. The dispersion relations of the wavenumber, propagation distance, and beam area of CWPs, are described and show that the characteristics of CWPs are similar to those of wedge plasmons and of gap plasmons. We also propose a new plasmon waveguide composed of twin metal wedges with a nano gap.     

Wide-range regulation of polyaniline conduction by interphase doping of a polyaniline film

The not-sufficient-enough conductance of semioxidized protonated polyaniline (PANI) is usually attributed to the presence of ordered quasi-metallic domains surrounded by a poorly conducting amorphous phase. The paper presents experimental results testifying to the existence, in semioxidized PANI, of multilevel redox heterogeneity that crucially effects the conductance magnitude in view of specific topology at which higher-oxidized (conducting) domains are surrounded by less oxidized (poorly conducting) domains and because the PANI conduction is extremely sensitive to the oxidation degree. It is shown experimentally that the interphase doping with metals and degenerate semiconductors of a semioxidized salt of PANI and poly(2-acrylamide-2-methyl-1-propanesulfonic acid) (PAMPSA) with a 1: 2 ratio between PANI and PAMPSA raises the PANI-PAMPSA conductivity by 3–8 orders of magnitude due to the formation near the interface of thin layers whose conductance depends on the work function of the material in contact with PANI-PAMPSA and in extreme cases substantially exceeds the conductance of gold and copper at room temperature.     

Optimality problem for infinite dimensional bilinear systems

For any finite dimensional control system with arbitrary cost, Pontryagin's Maximum Principle (PMP) [N. Bensalem, Localisation des courbes anormales et problème d'accessibilité sur un groupe de Lie hilbertien nilpotent de degré 2, Thèse de doctorat, Université de Savoie, 1998. [6]] gives necessary conditions for optimality of trajectories. In the infinite dimensional case, it is well known that these conditions are no more true in general. The purpose of this paper is to establish an “approached” version of PMP for infinite dimensional bilinear systems, with fixed final time and without constraints on the final state. Moreover, if the set of control is contained in a closed bounded convex subset with operators defining its dynamics are compact, or if it is contained in a finite dimensional space, we get an “exact” version of PMP. We also give two applications of these results. The first one deals with sub-Riemannian geometry on nilpotent Hilbertian Lie groups for which we can define a sub-Riemannian distance. The second one deals with heat equation for which we analyse the necessary conditions to give the optimal controls.     

Laser-induced breakdown threshold and fracture versus the nanostructure of two-phase glass

The radiation hardness and mechanical strength of single-and two-phase glasses are studied for the case when nanosecond laser pulses (λ= 1.06 μm, τ_0.5 ≈ 12.5 ns) are focused inside the material. Laser interferometry is applied to measure the displacement of the free surface, find optical breakage thresholds, and carry out the fractographic analysis of damaged regions. It is shown that breakdown channels and damage regions develop in a nonlinear manner according to optical breakdown mechanisms, changing each other with an increase in the laser energy. The strength of the two-phase glass is found to be more than four times that of the single-phase glass, although their elastic properties differ insignificantly. Such a considerable difference in the hardness of these materials with chemically similar constitutents is attributed to the presence of the double-lattice nanometer-scale structure of the two-phase glass.     

Visualization of industrial engineering data in Augmented Reality

This paper presents an innovative application of Augmented Reality (AR) techniques in the field of industrial engineering in which the user explores data from numerical simulations or the results of measurements and experiments, superimposed to the real object that they refer to. The user observes the object through a tablet PC, used as a video see-through handheld display. Data are visualized superimposed to the real object that represents a spatial reference relative to which the user can refer to, so the exploration is more natural compared to a traditional visualization software. Moreover, we have developed a new framework, called VTK4AR, that provides a set of useful software classes for the rapid development of AR applications for scientific visualization. VTK4AR is built on top of VTK (an open source API for scientific visualization), so it will be possible to employ a wide range of visualization techniques in many application fields, and moreover, it is possible to interactively manipulate data-sets in order to achieve a more effective way of visualization.