Ozone treatment for mercury determination in white wines

A method was developed for the generation of mercury vapour by means of cold-vapour flow-injection atomic absorption spectrometry (FI-CV-AAS) from white wine samples after ozonation as sample pre-treatment. Two different reactors designs for sample ozonation were developed and investigated. The limit of detection and the limit of quantification were, respectively, 0.5 and 1.7 μg l⁻¹, and the relative standard deviation (n=10) was 2% for a concentration of 50 μg l⁻¹ and 7% for a concentration of 5 μg l⁻¹. The pre-treatment with ozone has allowed to reduce drastically the amount of chemical reagents (e.g. carrier agent and reducing agent) used in the FI-CV-AAS system. The mercury content of wine samples was also determined by FI-CV-AAS after pre-concentration in the presence of HNO₃ and H₂O₂. In general, there was no significant difference among data obtained from both methodologies, but pre-treatment with ozone is much faster.     

Synthesis and Diels-Alder Reactions of a New Kind of Chiral Dienophiles: Cyclic Vinyl-p-tolylsulfilimines

A new kind of chiral dienophiles, cyclic vinyl-p-tolylsulfilimines (2a and 2b), were obtained from the corresponding (Z)-sulfinylacrylonitriles with HBF(4) and methanol. The asymmetric Diels-Alder reaction of optically pure 2a with cyclopentadiene under mild thermal or catalyzed conditions afforded only the endo-4a adduct with complete endo and pi-facial selectivities. The ability of the sulfilimine moiety to enhance the dienophilic reactivity of the double bond is similar to that of the sulfinyl group.     

Zeros of the Whittaker function associated to Coulomb waves

The zeros in the complex z plane of the Whittaker function W_c/z,µ(z),closely related to spherical waves in the quantum-mechanicalCoulomb problem, are investigated for varying real values ofthe parameters c and µ     

Linear sweep voltammetry: a cheap and powerful technique for the identification of the silver tarnish layer constituents

The potentialities of linear sweep voltammetry (LSV) for the characterization of the tarnish layer formed on pure and sterling silver samples exposed in the chapel and in the museum, at the Cathedral of Porto, in Portugal, are well demonstrated in this study. The technique allows the identification of the constituents of the thin tarnishing layers and also its relative abundance. A much more complex composition than the silver sulphide commonly associated with silver tarnish has been found, namely, silver chlorides, silver oxides and minor amounts of silver sulphide on the pure silver, plus copper oxides and a mixed copper–silver sulphide on the sterling silver samples. The tarnishing films were very thin mainly composed by silver chloride and silver oxides layers with estimated thicknesses ranging between 0.22 and 9.63 nm.     

Rhodamine-Appended Bipyridine: XOR and OR Logic Operations Integrated in an Example of Controlled Metal Migration

A new bipyridyl derivative 1 bearing rhodamine B as visible fluorophore was designed, synthesized and characterized as a fluorescent and colorimetric sensor for metal ions. Interaction with Cu²⁺, Zn²⁺, Cd²⁺, Hg⁺, and Hg²⁺ ions was followed by UV/Vis and emission spectroscopy. Upon addition of these metal ions, different colorimetric and fluorescent responses were observed. “Off-on-off” (Cu²⁺, Zn²⁺, and Hg²⁺) and “off-on” (Hg⁺ and Cd²⁺) systems were obtained. Probe 1 was explored to mimic XOR and OR logic operations for the simultaneous detection of Hg⁺–Cu²⁺ and Hg⁺–Zn²⁺ pairs, respectively. DFT calculations were also performed to gain insight into the lowest-energy gas-phase conformation of free receptor 1 as well as the atomistic details of the coordination modes of the various metal ions.     

Optimization of pressurized liquid extraction (PLE) of dioxin-furans and dioxin-like PCBs from environmental samples

Pressurized liquid extraction (PLE) applying three extraction cycles, temperature and pressure, improved the efficiency of solvent extraction when compared with the classical Soxhlet extraction. Polychlorinated-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like PCBs (coplanar polychlorinated biphenyls (Co-PCBs)) in two Certified Reference Materials [DX-1 (sediment) and BCR 529 (soil)] and in two contaminated environmental samples (sediment and soil) were extracted by ASE and Soxhlet methods. Unlike data previously reported by other authors, results demonstrated that ASE using n-hexane as solvent and three extraction cycles, 12.4 MPa (1800 psi) and 150 degrees C achieves similar recovery results than the classical Soxhlet extraction for PCDFs and Co-PCBs, and better recovery results for PCDDs. ASE extraction, performed in less time and with less solvent proved to be, under optimized conditions, an excellent extraction technique for the simultaneous analysis of PCDD/PCDFs and Co-PCBs from environmental samples. Such fast analytical methodology, having the best cost-efficiency ratio, will improve the control and will provide more information about the occurrence of dioxins and the levels of toxicity and thereby will contribute to increase human health.     

The fluorobenzene-argon S(1) excited-state intermolecular potential energy surface

We evaluate the first excited-state (S1) intermolecular potential energy surface for the fluorobenzene-Ar van der Waals complex using the coupled cluster method and the augmented correlation-consistent polarized valence double-zeta basis set extended with a set of 3s3p2d1f1g midbond functions. To calculate the S(1) interaction energies, we use ground-state interaction energies evaluated with the same basis set and the coupled cluster singles and doubles (CCSD) including connected triple excitations [CCSD(T)] model and interaction and excitation energies evaluated at the CCSD level. The surface minima are characterized by the Ar atom located above and below the fluorobenzene ring at a distance of 3.5060 A with respect to the fluorobenzene center of mass and at an angle of 5.89 degrees with respect to the axis perpendicular to the fluorobenzene plane. The corresponding interaction energy is -425.226 cm(-1). The surface is used in the evaluation of the intermolecular level structure of the complex, and the results are compared to the experimental data available and to those found in previous theoretical papers on ground-state potentials for similar complexes.     

Tandem focused ultrasound (TFU) combined with fast furnace analysis as an improved methodology for total mercury determination in human urine by electrothermal-atomic absorption spectrometry

A new sample preparation procedure based on tandem (that is, different diameter probe sonicators used in the same sample treatment) focused ultrasound (TFU) for mercury separation, preconcentration and back-extraction in aqueous solution from human urine has been developed. The urine is first oxidized with KMnO₄/HCl/focused ultrasound (6 mm probe). Secondly, the mercury is extracted and preconcentrated with dithizone and cyclohexane. Finally, the mercury is back-extracted and preconcentrated again with the aid of focused ultrasound (3 mm probe). The procedure allows determining mercury by electrothermal atomic absorption spectrometry with fast furnace analysis and calibration against aqueous standards. Matrix modification is provided by the chemicals used in the sample treatment. The procedure is accomplished with low sample volume (8.5 ml). Low volume and low concentration reagents are used. The sample treatment is rapid (less than 3 min per sample) and avoids the use of organic phase in the graphite furnace. The preconcentration factor used in this work was 14. The limit of detection and the limit of quantification in urine were, respectively, 0.27 and 0.9 μg l⁻¹. The relative standard deviation of aqueous standards (n=10) was 4% for a concentration of 100 μg l⁻¹ and 5% for a concentration of 400 μg l⁻¹. Recoveries from spiked urine with inorganic mercury, methyl-mercury, phenyl-mercury and diphenyl-mercury ranged from 86 to 98%.