Experimental study of a plasma-filled backward wave oscillator

Experimental studies of a plasma-filled X-band backward-wave oscillator (BWO) are presented. Depending on the background gas pressure, microwave frequency upshifts of up to 1 GHz appeared along with an enhancement by a factor of 7 in the total microwave power emission. The bandwidth of the microwave emission increased from ⩽0.5 GHz to 2 GHz when the BWO was working at the RF power enhancement pressure region. The RF power enhancement appeared over a much wider pressure range in a high beam current case (10-100 mT for 3 kA) than in a lower beam case (80-115 mT for 1.6 kA). The plasma-filled BWO has higher power output than the vacuum BWO over a broader region of magnetic guide field strength. Trivelpiece-Gould modes (T-G modes) are observed with frequencies up to the background plasma frequency in a plasma-filled BWO. Mode competition between the T-G modes and the X-band Tm₀₁ mode prevailed when the background plasma density was below 6×10¹¹ cm^-3 . At a critical background plasma density of ≃8×10¹¹ cm^-3 power enhancement appeared in both X-band and the T-G modes. Power enhancement of the S-band in this mode collaboration region reached up to 8 dB. Electric fields measured by the Stark-effect method were as high as 34 kV/cm while the BWO power level was 80 MW. These electric fields lasted throughout the high-power microwave pulse     

The standard model on non-commutative space-time

We consider the standard model on a non-commutative space and expand the action in the non-commutativity parameter . No new particles are introduced; the structure group is . We derive the leading order action. At zeroth order the action coincides with the ordinary standard model. At leading order in we find new vertices which are absent in the standard model on commutative space-time. The most striking features are couplings between quarks, gluons and electroweak bosons and many new vertices in the charged and neutral currents. We find that parity is violated in non-commutative QCD. The Higgs mechanism can be applied. QED is not deformed in the minimal version of the NCSM to the order considered. Received: 29 November 2001 / Published online: 25 January 2002     

Study on the in—plane electrical resistivity and thermoelectric power in single crystals of La2—xBaxCuO4

The in-plane electrical resistivity and thermoelectric power have been measured on single crystals of La_2-xBa_xCuO₄ at around x=0.125. The room temperature resistivity and thermopower have their maximum values at x=0.125, indicating that the carrier concentration is the minimum and the carriers are most strongly localized at x=0.125. The observed semiconductor-like behaviour can be well described by the weak-localized quasi-two-dimensional state. The steep rise in electric resistivity of the sample at x=0.125 below 70K is attributed to the formation of static stripe-order of holes and spins, which are pinned by the low-temperature tetragonal (LTT) structure, as discovered in La_1.48Nd_0.4Sr_0.12CuO₄. The temperature dependence of electric resistivity below 70K is still well described by the formula ρ∝ lnT. A definite change in the slope of thermopower is observed at the low-temperature orthorhombic-LTT structural phase transition temperature. The origin of the 1/8 anomaly is discussed in the text.     

Determination of the portfolio selection for a property-liability insurance company

This paper presents an analysis of a portfolio model which can be used to assist a property-liability insurance company in determining the optimal composition of the insurance and investment portfolios. By introducing insurer's threshold risk and relaxing some non-realistic assumptions made in traditional chance constraint insurance and investment portfolio models, we propose a method for an insurer to maximize his return threshold for a given threshold risk level. This proposed model can be used to optimize the composition of underwriting and investment portfolios regarding the insurer's threshold risk level, as well as to generate the efficient frontier by adjusting insurer's threshold risk levels. A numerical example is given based on the industry's aggregated data for a sixteen year period.     

The perturbation bounds for the solution of weighted kronecker product linear systems using thew-weighted drazin inverse

The classical perturbation theory is extended to the weighted Kronecker product linear systems W(A? B)Wx =h. Upper bounds are derived for the normwise condition number.     

Reflection of Surface Plasmon Polaritons by a Corner Reflector of Negative Index Materials

A novel type of corner reflector for the reflection of surface plasmon polariton (SPP) is proposed. The reflector consists of two layers of compensatory media whose permittivity and permeability take opposite signs to that of the corresponding layer of the SP waveguide. By rigorously solving Maxwell's equations, the reflected SPP is proved to exist. The transverse wave vector of the reflected SPP is always antiparallel to that of the incident SPP and no phase retardation is introduced.     

Observation of spontaneous pattern with six-fold symmetry in disk-shaped ZnO complex microstructures

Using a simple vapor phase transport technique, we have fabricated unique complex disk-shaped ZnO microstructures comprising a small disk coaxially grown on a large one and observed spatially perfect six-fold symmetric patterns. The observed results can be explained based on the spontaneous nanoindentation (NI) effect under the geometric constraints and the explanation can be extended to fathom the growth mechanism of other highly symmetrical ZnO nanostructures. Our results indicate that NI not only can elucidate the mechanical properties of surfaces and thin films but also is an effective approach to fabricate ordered nanostructures with high precision on the location of the building blocks. PACS 81.16.Rf; 81.07.-b; 81.05.Dz     

Effect of nitrogen surface doping on the work function and field emission of hydrogenated amorphous carbon films

The effect of nitrogen surface doping on the electron field emission characteristics of hydrogenated amorphous carbon films was studied. It was found that the emission threshold electric field decreased after nitrogen surface doping which indicated the reduction of the emission barrier at the film surface. It was demonstrated that this improvement arose from the decrease of the effective work function due to the formation of a dipole layer induced by chemical termination and chemical structural change on the film surface. PACS 52.75.Xx; 73.30 +y; 73.61.Jc     

Microstructural evolution of decagonal quasicrystal in the undercooled Al72Ni12Co16 alloy melts

The microstructure evolution of decagonal quasicrystals in Al₇₂Ni₁₂Co₁₆ alloy was investigated by the electromagnetic melting and cyclic superheating method. Single-phase decagonal quasicrystals have been obtained when the undercoolings were larger than 60 K. The decagonal quasicrystals formed at various undercoolings show different microstructural morphologies. Furthermore, grain refinement was found near the undercooling of 120 K. Based on current thermodynamic and dendrite growth theories, a dimensionless superheating parameter was adopted to explain the effect of processing conditions on the microstructure of Al₇₂Ni₁₂Co₁₆ alloy. The result indicate that the fine equiaxied microstructure of decagonal quasicrystal (D-phase) formed near on undercooling of 120 K originates from the break-up of dendrites.     

Surface and interfacial properties of PVDF/acrylic copolymer blends before and after UV exposure

Morphological and chemical properties of both the surface and interface of poly(vinylidene fluoride)/poly(methyl methacrylate)-co-poly(ethyl acrylate) (PVDF/PMMA-co-PEA) blend films have been investigated before and after the samples were exposed to ultraviolet (UV) irradiation using a xenon arc lamp at 50 °C and 9% relative humidity (RH) for 7 months. Surface and interfacial morphologies were studied by atomic force microscopy (AFM). Chemical composition information was obtained by confocal Raman microscopy, attenuated total reflection-FTIR spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. Results show an enrichment of the PVDF material at the air surface, while the acrylic copolymer enriches the interface. Blends having greater than 50% mass fraction of PVDF show little change in the surface morphology after UV exposure for 7 months. However, for a lower PVDF content, blends exhibit significant degradation of PMMA-co-PEA copolymer and a much rougher surface after UV exposure. Microstructural changes in the PVDF spherulites are also observed after UV degradation. It is found that the surface and interfacial morphologies are correlated with the chemical properties.