Electrical control of antiferromagnetic metal up to 15 nm

Manipulation of antiferromagnetic (AFM) spins by electrical means is on great demand to develop the AFM spintronics with low power consumption. Here we report a reversible electrical control of antiferromagnetic moments of FeMn up to 15 nm, using an ionic liquid to exert a substantial electric-field effect. The manipulation is demonstrated by the modulation of exchange spring in [Co/Pt]/FeMn system, where AFM moments in FeMn pin the magnetization rotation of Co/Pt. By carrier injection or extraction, the magnetic anisotropy of the top layer in FeMn is modulated to influence the whole exchange spring and then passes its influence to the [Co/Pt]/FeMn interface, through a distance up to the length of exchange spring that fully screens electric field. Comparing FeMn to IrMn, despite the opposite dependence of exchange bias on gate voltages, the same correlation between carrier density and exchange spring stiffness is demonstrated. Besides the fundamental significance of modulating the spin structures in metallic AFM via all-electrical fashion, the present finding would advance the development of low-power-consumption AFM spintronics.     

基于偏振特性对石英玻璃和绿漆涂层的反演

物质的偏振特性与其复折射率、表面粗糙度以及观测几何条件有关,为了应用偏振探测技术实现对目标的定量反演,本文首先对两种典型目标(绿漆涂层和石英玻璃)的偏振特性进行了实验测定,并对偏振度与探测天顶角的关系进行了分析。利用实验数据并基于描述目标偏振特性的PG模型首次在考虑了粗糙度的影响下,对目标的折射率、消光系数进行了定量反演,最后将反演结果与参考结果进行比较。结果表明,石英玻璃的折射率相对误差为4.944 9%,绿漆涂层的折射率与消光系数的相对误差分别为11%和21.558 9%。该方法在考虑表面粗糙度的条件下能够更精确地测定物质的复折射率,同时也为偏振技术应用于目标定量反演提供了依据。     

Lasing with resonant feedback in weakly scattering random systems

Laser action in active random media in the weak scattering regime far from Anderson localization is investigated by coupling Maxwell's equations with the rate equations of a four-level atomic system. We report systematic lasing action with resonant feedback and show that the lasing modes mostly consist of traveling waves spatially extended over the whole system. Next we address the question of the origin of the feedback mechanism in such a system where no disorder-induced long-lived resonances are available, and present strong evidence that they correspond to the quasimodes of the passive system. This in turn provides an original way to access the spatial distribution of the quasimodes of a non-Hermitian system.     

Turbulence control with local pacing and its implication in cardiac defibrillation

In this review article, we describe turbulence control in excitable systems by using a local periodic pacing method. The controllability conditions of turbulence suppression and the mechanisms underlying these conditions are analyzed. The local pacing method is applied to control Winfree turbulence (WT) and defect turbulence (DT) induced by spiral-wave breakup. It is shown that WT can always be suppressed by local pacing if the pacing amplitude and frequency are properly chosen. On the other hand, the pacing method can achieve suppression of DT induced by instabilities associated with the motions of spiral tips while failing to suppress DT induced by the instabilities of wave propagation far from tips. In the latter case, an auxiliary method of applying gradient field is suggested to improve the control effects. The implication of this local pacing method to realistic cardiac defibrillation is addressed.     

A Feasible and Quantitative Encoding Method for Microbeads with Multicolor Quantum Dots

Multicolor encoded beads were achieved by incorporating two color core-shell quantum dots (QDs) (CdSe/ZnS) to commercial polystyrene (PS) beads. By controlling the concentration ratios of the two quantum dots (QDs) in doping solutions, a series of codes with different intensity ratios were obtained. Based on the multiple encoded carboxylic modified polystyrene beads, fluorescent dyes labeled antibodies were distinguished successfully on the beads’ surface. It suggests that the encoded beads from this method have the practicability in biological applications and chemical analysis. Hai-Qiao Wang and Zhen-Li Huang authors contribute equally to this work     

金属相1T´ MoS2增强类石墨相C3N4的可见光催化性能

通过煅烧和静电自组装的方法制备了1T′ MoS₂超薄纳米片和类石墨烯相氮化碳(g-C₃N₄)纳米片的复合材料. 该材料在光催化实验中展现出6.24 μmol?g^?1?h^?1的产氢速率, 优于贵金属铂修饰的g-C₃N₄纳米片的性能(4.64 μmol?g^?1?h^?1). 此外, 该复合材料在光催化降解有机染料甲基橙的实验中表现出0.19 min^?1的催化速率, 而纯g-C₃N₄纳米片只有0.053 min^?1的催化速率. 材料光催化性能的提升可归结于1T′MoS₂ 和g-C₃N₄之间的协同效应, 包括光吸收的增强以及因1T′MoS₂优异电子导电性而得到的高效电荷分离.     

长链支化聚丙烯的非线性流变行为

通过大幅振荡剪切试验方法, 研究了长链支化聚丙烯的非线性流变学行为, 揭示了长链支化结构与非线性黏弹响应的关系. 利用傅里叶变换流变学方法得到试样的三次倍频相对振幅I_3/1与应变的标度关系, 用于界定线性聚丙烯和长链支化聚丙烯非线性流变行为的差异, 并定义了非线性系数来量度长链支化程度. 在高应变下, I_3/1与应变的变化关系可以进一步描述长链支化在非线性流场下的特性, 并得到了长链支化程度与其非线性响应之间的变化关系. 通过应力波的Lissajous曲线分解, 发现了环内和环间黏弹性的差异, 长链支化结构在大应变流场下的非线性黏弹性响应弱于线性结构, 支化程度越高非线性响应越弱.     

N-[2,6-二氯-4-(1,2,4-噁二唑-3-基)苯基]-2-甲氧基烟酰胺的合成、晶体结构及抗肿瘤活性研究

报道一种新型1,2,4-噁二唑衍生物,N-[2,6-二氯-4-(1,2,4-噁二唑-3-基)苯基]-2-甲氧基烟酰胺（C15H10Cl2N4O3）的合成,其结构通过1H NMR、13C NMR、HRMS以及X-射线单晶衍射进行表征。该晶体结构属于三斜晶系, P 1(—) 空间群,晶胞参数 a = 7.1291 (9), b = 8.4352 (10), c = 14.0021 (18) ?, α = 73.834 (3), β = 77.407 (3), γ = 70.019 (3)°, Mr = 366.18, V = 752.97 (16) ?3, Z = 2, Dc = 1.611 g/cm3, μ(MoKα) = 0.454 mm-1, F(000) = 372.0 , 晶体尺寸为 0.36 × 0.2 × 0.1 mm,Rint = 0.023。初步活性研究发现,该化合物对LoVo, A549, SK-BR-3, HeLa这四种肿瘤细胞株具有明显的抑制作用,尤其是对HeLa细胞的抑制活性与阳性药物5-氟尿嘧啶 (5-FU)相当。     

Reversibly self-assembled pH-responsive PEG-p(CL-g-TMC) polymersomes

Polymersomes have gained much interest within the biomedical field as drug delivery systems due to their ability to transport and protect cargo from the harsh environment inside the body. For an improved drug efficacy, control over cargo release is however also an important factor to take into account. An often employed method is to incorporate pH sensitive groups in the vesicle membrane, which induce disassembly and content release when the particles have reached a target site in the body with the appropriate pH, such as the acidic microenvironment of tumor tissue or the endosome. In this paper, biodegradable poly(ethylene glycol)-poly(caprolactone-gradient-trimethylene carbonate)-based polymeric vesicles have been developed with disassembly features at mild acidic conditions. Modifying the polymer backbone with imidazole moieties results in vesicle disassembly upon protonation due to the lowered pH. Furthermore, upon increasing the pH efficient re-assembly into vesicles is observed due to the switchable amphiphilic nature of the polymer. When this re-assembly process is conducted in presence of cargo, enhanced encapsulation is achieved. Furthermore, the potency of the polymeric system for future biomedical applications such as adjuvant delivery is demonstrated.     

MIL-53(Al)衍生的Rh单原子催化剂在间氯硝基苯选择性加氢制间氯苯胺反应中的应用

卤代苯胺是化学工业中重要的中间体,主要用于制造药物、聚合物、染料等含氮化学品,用多相金属催化剂催化卤代硝基芳烃加氢制备卤代苯胺是一种高效,绿色和可持续发展的生产工艺.该过程需要选择性加氢硝基基团,同时避免卤素基团的脱卤副反应发生.然而,化学选择性加氢存在巨大的挑战,难点在于催化剂的精准设计,一方面要求具备对硝基基团合适的加氢能力,另一方面要阻止对卤素基团的脱卤副反应发生.基于此,研制高效多相金属催化剂用于卤代硝基芳烃选择性加氢制备卤代苯胺反应引起了高度关注.近年来,单原子金属催化剂受到越来越多的关注,并在卤代硝基芳烃选择性加氢制备卤代苯胺反应中显现出极大的潜力.本文通过在金属有机骨架材料MIL-53(Al)自组装的过程中将金属Rh原位嫁接其骨架结构中,继而通过限域热解的方法制备了Rh@Al2O3@C单原子催化剂,其在间氯硝基苯(m-CNB)加氢制间氯苯胺(m-CAN)反应中显现了高效催化选择性.球差校正高角度环形暗场模式的透射电镜,CO作为探针分子的红外光谱和X射线光电子能谱等结果发现,Rh是以单原子的形式均匀的分布在Al2O3上并被无定型碳包覆,且Rh化学价态呈正价.而27Al固体核磁共振与密度泛函理论计算的结果则进一步确定Al2O3@C载体中存在的五配位的Al物种(AlV)是锚定Rh单原子的主要位点,AlV的不饱和的配位结构可以有效地稳定Rh单原子,对形成Rh位点的单原子分散至关重要.在间氯硝基苯选择性加氢制间氯苯胺反应中,与等体积浸渍法制备的Rh/C和Rh/γ-Al2O3纳米催化剂相比,Rh@Al2O3@C单原子催化剂表现出优异催化性能:其在313 K,氢气压力为20 bar的温和条件下转换频率(TOF)高达2317 molm-CNB·molRh-1·h-1,优于已报道的多相金属催化剂,是目前的最高值.此外,该催化剂展现出极佳的稳定性能,经过五次循环后,该催化剂对m-CAN的选择性仍旧保持在98％左右.Rh@Al2O3@C单原子催化剂的优异催化性能源自于金属单原子结构的形成对于金属位点电子结构的有效调节,进而调控催化剂加氢性能并实现对加氢脱卤副反应的抑制;与此同时,Rh@Al2O3@C催化剂增进了酸位点的可及性,从而促进了其串联步骤中包含的脱水反应的发生,进而有效提高催化剂的反应活性.