Electrochemical behavior of tadalafil on TiO2 nanoparticles–MWCNT composite paste electrode and its determination in pharmaceutical dosage forms and human serum samples using adsorptive stripping square wave voltammetry

A sensitive and selective electroanalytical method for the determination of tadalafil (TAD) using adsorptive stripping square wave voltammetry at multiwalled carbon nanotube paste electrode (MWCNTPE) and modified TiO₂-multiwalled carbon nanotube paste electrode (TiO₂-MWCNTPE) was presented. The calibration curves were linear in the concentration range of 3.6–8.1 and 12.7–61.1 μM on MWCNTPE, 0.27–15.2 μM on TiO₂-MWCNTPE. The recommended method was successfully applied to the determination of the drug in tablets and human serum samples with good recoveries. The selectivity of the proposed method was considered in the presence of Ca²⁺, K⁺, Na⁺, 2-mercapto benzimidazole, thiourea, and dopamine by means of recovery tests. Interfering agents did not show considerable effect on TAD determination. No electroactive interferences from the tablet excipients and endogenous substances from biological material were detected. The possible electrooxidation pathway and the number of transferred electrons were also investigated.     

The Removal of Victoria Blue from Aqueous Solution by Adsorption on a Low-Cost Material

The use of perlite for the removal of victoria blue from aqueous solution at different concentration, ionic strength, pH and temperature has been investigated. Adsorption process is attained to the equilibrium within 1 h. It is found that the adsorption capacity of perlite samples for the removal of victoria blue increased by increasing pH and temperature, and decreased by expansion and ionic strength. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions, and the experimental data were correlated reasonably well by the adsorption isotherm of the Langmuir, and the isotherm parameters (Q _m and K) have been calculated for perlite samples as well. It is concluded that victoria blue is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless seperation factor (R) have shown that perlite can be used for removal of victoria blue from aqueous solutions, but unexpanded perlite is more effective.     

A consistent model for 1/f-noise in thin-film devices such as bolometers,Josephson junctions and squids

The 1/f noise power spectrum is calculated consistently for thin-film devices such as bolometers, Josephson junctions and SQUIDs, using a model based on spontaneous temperature fluctuations and heat exchange between the device and the surrounding medium. Numerical results agree closely with existing experimental data.     

Production of Magnetic Nano‐bioconjugates via Ball Milling of Commercial Boron Powder with Biomolecules

Mechanochemical preparation and characterization of surface‐functionalized magnetic boron nanoparticles for biomedical applications are presented. Alloying with the stainless steel ball milling material during mechanochemical activation proved to be an alternative route to introduce magnetic properties to the nanomaterials, while functionalization with biomolecules provided biocompatible surfaces for bioconjugation.     

Simultaneous Determination and Drug Dissolution Testing of Combined Amlodipine Tablet Formulations Using RP-LC

In the proposed work, the simultaneous analysis of amlodipine–rosuvastatin and amlodipine–atorvastatin in their dosage forms was achieved. Simultaneous dissolution profiles of the amlodipine–rosuvastatin and amlodipine–atorvastatin tablets are realized using Apparatus II with a simple, accurate and precise RP-LC method. The mobile phase consisting of 0.2 % H₃PO₄ and pH 5:methanol:acetonitrile (46:27:27) was used. The samples of 10 µL were injected onto a Zorbax SB C18 (100 mm, 4.6 mm, 3.5 µm particle size) column with 1.2 µL min⁻¹ flow rate. The samples were detected at 236 nm. By plotting peak area ratios vs. concentration, the linearity for amlodipine–rosuvastatin and amlodipine–atorvastatin was determined. With the developed RP-LC method, AML, ROS and ATOR were detected within the range of 0.25–10, 0.5–10 and 0.25–25 µg mL⁻¹, respectively. LOD and LOQ values were also calculated as 0.028, 0.058, 0.021 and 0.095 µg mL⁻¹, 0.195 µg mL⁻¹, 0.070 µg mL⁻¹ for AML, ROS and ATOR, respectively. System suitability tests parameters, such as capacity factor, selectivity to previous peak, selectivity to next peak, resolution to previous peak, resolution to next peak, tailing factor, theoretical number of plates, were performed and found coherent with the ICH guideline parameters. The proposed method has been extensively validated in terms of recovery, and recovery results were between 99 and 101 %. For proving the precision, between-day and within-day repeatability results of the method were proposed. The method can be used for the simultaneous determination of amlodipine–rosuvastatin and amlodipine–atorvastatin.

     

Synthesis,characterization and non-linear optical properties of two mononuclear Cu(II) complexes of 2,6-bis(1-butylbenzimidazol-2-yl)pyridine

Two copper(II) complexes, [Cu(L)(N₃)₂]·MeOH and [Cu(L)(NCS)₂]·MeOH, were prepared and characterized by spectroscopic, analytical, and quantum chemical studies, where L is 2,6-bis(1-butylbenzimidazol-2-yl)pyridine. X-ray quality crystals of [Cu(L)(N₃)₂]·MeOH were obtained by slow evaporation of MeOH solution of the complex. Molecular structure of [Cu(L)(N₃)₂]·MeOH was determined by X-ray crystallography. The asymmetric unit contains one [Cu(L)(N₃)₂] and one MeOH molecule. Cu(II) in [Cu(L)(N₃)₂]·MeOH is five-coordinate, bonded to five nitrogens (three from L and two from two azide anions). Coordination geometry around Cu(II) center is distorted square-pyramidal with τ value of 0.065. Optimized geometries, IR spectra, and non-linear optical properties of the complexes were obtained by computational studies based on density functional theory (DFT) with M062X method. NLO properties of these complexes were investigated computationally and both complexes exhibit better NLO properties than urea.     

LC-HRMS Profiling and Antidiabetic,Anticholinergic, and Antioxidant Activities of Aerial Parts of Kınkor (Ferulago stellata)

Kınkor (Ferulago stellata) is Turkish medicinal plant species and used in folk medicine against some diseases. As far as we know, the data are not available on the biological activities and chemical composition of this medicinal plant. In this study, the phytochemical composition; some metabolic enzyme inhibition; and antidiabetic, anticholinergic, and antioxidant activities of this plant were assessed. In order to evaluate the antioxidant activity of evaporated ethanolic extract (EEFS) and lyophilized water extract (WEFS) of kınkor (Ferulago stellata), some putative antioxidant methods such as DPPH· scavenging activity, ABTS^•+ scavenging activity, ferric ions (Fe³⁺) reduction method, cupric ions (Cu²⁺) reducing capacity, and ferrous ions (Fe²⁺)-binding activities were separately performed. Furthermore, ascorbic acid, BHT, and α-tocopherol were used as the standard compounds. Additionally, the main phenolic compounds that are responsible for antioxidant abilities of ethanol and water extracts of kınkor (Ferulago stellata) were determined by liquid chromatography-high-resolution mass spectrometry (LC-HRMS). Ethanol and water extracts of kınkor (Ferulago stellata) demonstrated effective antioxidant abilities when compared to standards. Moreover, ethanol extract of kınkor (Ferulago stellata) demonstrated IC₅₀ values of 1.772 μg/mL against acetylcholinesterase (AChE), 33.56 ± 2.96 μg/mL against α-glycosidase, and 0.639 μg/mL against α-amylase enzyme respectively.     

Structural,spectral, experimental,and theoretical investigations of (E)-4-fluoro-N′-(pyridin-2-ylmethylene)benzohydrazide monohydrate

The structural and nonlinear optical properties of the Schiff base material, (E)-4-fluoro-N′-(pyridin-2-ylmethylene)benzohydrazide monohydrate (FPMBH) were studied. The experimental investigations were performed using Fourier transform infrared (FTIR), ultraviolet (UV) and nuclear magnetic resonance (NMR) spectral techniques. The computational analyses were made by DFT method. A comparison between experimental and theoretical predictions was made and interpreted. The maximum absorption wavelength was found by both experimental and theoretical analyses. The Hirshfeld surface analysis was performed to understand the various molecular interactions. Highest occupied and lowest unoccupied molecular orbitals (HOMO–LUMO) analysis was performed for the title molecule to know about the possible charge transfer taking place within the molecule. Reactivity features were also determined by molecular electrostatic potential (MEP) analysis. The third-order nonlinear optical studies were done by z-scan experiment, and the results were discussed.

     

Radical ion states of platinum acetylide oligomers

The ion radicals of two series of platinum acetylide oligomers have been subjected to study by electrochemical and pulse radiolysis/transient absorption methods. One series of oligomers, Ptn, has the general structure Ph-C[triple bond]C-[Pt(PBu3)2-C[triple bond]C-(1,4-Ph)-C[triple bond]C-]n-Pt(PBu3)2-C[triple bond]C-Ph (where x=0-4, Ph=phenyl and 1,4-Ph=1,4-phenylene). The second series of oligomers, Pt4Tn, contain a thiophene oligomer core, -C[triple bond]C-(2,5-Th)n-C[triple bond]C- (where n=1-3 and 2,5-Th=2,5-thienylene), capped on both ends with -Pt(PBu3)2-C[triple bond]C-(1,4-Ph)-C[triple bond]C-Pt(PBu3)2-C[triple bond]C-Ph segments. Electrochemical studies reveal that all of the oligomers feature reversible or quasi-reversible one-electron oxidation at potentials less than 1 V versus SCE. These oxidations are assigned to the formation of radical cations on the platinum acetylide chains. For the longer oligomers multiple, reversible one-electron waves are observed at potentials less than 1 V, indicating that multiple positive polarons can be produced on the oligomers. Pulse-radiolysis/transient absorption spectroscopy has been used to study the spectra and dynamics of the cation and anion radical states of the oligomers in dichloroethane and tetrahydrofuran solutions, respectively. All of the ion radicals exhibit two allowed absorption bands: one in the visible region and the second in the near-infrared region. The ion radical spectra shift with oligomer length, suggesting that the polarons are delocalized to some extent on the platinum acetylide chains. Analysis of the electrochemical and pulse radiolysis data combined with the density functional theory calculations on model ion radicals provides insight into the electronic structure of the positive and negative ion radical states of the oligomers. A key conclusion of the work is that the polaron states are concentrated on relatively short oligomer segments.