Temperature and magnetic field responsive hyaluronic acid particles with tunable physical and chemical properties

We report the preparation and characterization of thiolated-temperature-responsive hyaluronic acid-cysteamine-N-isopropyl acrylamide (HA-CYs-NIPAm) particles and thiolated-magnetic-responsive hyaluronic acid (HA-Fe-CYs) particles. Linear hyaluronic acid (HA) crosslinked with divinyl sulfone as HA particles was prepared using a water-in-oil micro emulsion system which were then oxidized HA-O with NaIO₄ to develop aldehyde groups on the particle surface_. HA-O hydrogel particles were then reacted with cysteamine (CYs) which interacted with aldehydes on the HA surface to form HA particles with cysteamine (HA-CYs) functionality on the surface. HA-CYs particles were further exposed to radical polymerization with NIPAm to obtain temperature responsive HA-CYs-NIPAm hydrogel particles. To acquire magnetic field responsive HA composites, magnetic iron particles were included in HA to form HA-Fe during HA particle preparation. HA-Fe hydrogel particles were also chemically modified. The prepared HA-CYs-NIPAm demonstrated temperature dependent size variations and phase transition temperature. HA-CYs-NIPAm and HA-Fe-CYs particles can be used as drug delivery vehicles. Sulfamethoxazole (SMZ), an antibacterial drug, was used as a model drug for temperature-induced release studies from these particles.     

Comparison of NMR Water Proton T1 Measurements in Healthy and Pathological Blood

water proton T1 in blood from healthy volunteers and patients with acute leukaemia, lymphoma; iron deficiency anaemia, post hepatitic cirrhosis and tuberculosis, was measured by a FT-NMR spectrometer. Relaxation measurements were performed at 60MHz frequency and a temperature of (20 ± 0.5)C. The T1 measured for each disease correlates strongly with hemoglobin content. The spin-lattice relaxation time in each abnormal group was signaficantly (p < 0.001) elevated over normal group. There is little overlap between the healthy and abnormal groups. On the contrast, T1 ranges obtained for malignant groups and non-malignant diseases do overlap.     

The Effect of Selenium Supplementation on the NMR Proton Relaxation Time T1 in Plasma

Selenium has been identified as an essential dietary trace e1ementQ)which is a component of glutathione peroxidase (GSH-Px)(₂)and a cytochrome C-like protein(₃), The enzyme,the four subunits of which each contain one atom of selenium in the form of selenocysteine, the selenium containing active centre being amenable to chemical modification, catalyses the reduction of H,O,and organic hydroperoxides to water.In this way GSH-Px plays an important role in the protection of the cell from oxidative stresses such as the superoxide anion,organic hydroperoxides and H₂O₂     

Fiber-optic beam shaper based on multimode interference

A new method of fiber-optic based beam shaping is investigated both numerically and experimentally. A cylindrically symmetric method of lines (MoLs) is developed to simulate the device. The device is fabricated by fusion splicing a predetermined length of multimode fiber (MMF) to a single-mode fiber. The multimode interference (MMI) effects create ring-shaped field profiles at certain positions inside the MMF. The shaped beam can be used in medical applications requiring particular irradiation patterns.     

Heterotermetallic Indium Lithium Halostannates: Low‐Temperature Single‐Source Precursors for Tin‐Rich Indium Tin Oxides and Their Application for Thin‐Film Transistors

The syntheses and structural elucidation of dimeric [Sn(OCyHex)₂] ( 1 ), its corresponding (cyclohexoxy)alkalistannates(II) [{M(OCyHex)₃Sn}₂] (M=Li ( 2 ), Na ( 3 ), K ( 4 )), and of the first heteroleptic heterotermetallic Li/In/Sn–haloalkoxide clusters [X₂In{LiSn₂(OCyHex)₆}] (X=Br ( 5 ), Cl ( 6 )) with a double seco‐norcubane core are reported. They represent suitable precursors for new amorphous indium tin oxide (ITO) materials as transparent conducting oxides with drastically reduced concentrations of expensive indium, while maintaining their high electrical performance. In fact, compounds 5 and 6 were successfully degraded under dry synthetic air at relatively low temperature, resulting in new semiconducting tin‐rich ITOs homogeneously dispersed in a tin oxide/lithium oxide matrix. The obtained particles were investigated and characterised by different analytical techniques, such as powder XRD, IR spectroscopy, SEM, TEM and energy‐dispersive X‐ray spectroscopy (EDX). The analytical data confirm that the final materials consist of tin‐containing indium oxide embedded in an amorphous tin oxide matrix. The typical broadening and shift of the observed indium oxide reflections to higher 2θ values in the powder XRD pattern clearly indicated that tin centres were successfully incorporated into the In₂O₃ lattice and partially occupied In³⁺ sites. Investigations by EDX mapping proved that Sn was homogeneously distributed in the final materials. Thin‐film field‐effect transistors (FETs) were fabricated by spin‐coating of silicon wafers with solutions of 5 in toluene and subsequent calcination under dry air (25–700 °C). The FETs prepared with precursor 5 exhibited excellent performances, as shown by a charge‐carrier mobility of 6.36×10^?1 cm² V^?1 s (calcination at 250 °C) and an on/off current ratio of 10⁶.     

The Adsorption of Polyvinylpyrrolidone on Kaolinite Saturated with Sodium Chloride

The adsorption of two different molecular weights of polyvinylpyrrolidone (PVP) (M(w)=44,000 and M(w)=360,000 g mol(-1)) from water on kaolinite saturated with sodium chloride has been studied. The adsorption of PVP increases slowly as temperature increases. The adsorption of PVP on the kaolinite was studied by considering Fourier transform infrared (FTIR) spectra, X-ray diffraction patterns, and dielectric constants. During the adsorption process, PVP interacts with saturating sodium cations and possibly forces some of them onto the edges of the kaolinite; thus, the dielectric constant of saturated kaolinite is reduced after PVP adsorption. Copyright 2001 Academic Press.     

Usage of deep eutectic solvents for the digestion and ultrasound-assisted liquid phase microextraction of copper in liver samples

In this study, we used deep eutectic solvents for digestion and ultrasound-assisted emulsification liquid phase microextraction (UA-ELPME) of copper in liver samples. Different types of DESs were prepared for digestion and microextraction steps. DESs consisting of lactic acid and choline chloride for the digestion step and DESs consisting of tetrabuthylamonium chloride and decanoic acid for ultrasound-assisted emulsification liquid phase microextraction were used in this method. The liver samples were digested by using DES-based digestion method. After digestion step, Cu(II) ions in aqueous phase were complexed with sodium dimethyl dithiocarbamate (NaDMDTC) and the obtained hydrophobic complex was extracted to tetrabuthylamonium chloride-decanoic acid DES phase. A microsample injection system coupled with flame atomic absorption spectrometer (MS-FAAS) was used in the detection of copper. LOD, LOQ, PF and % RSD were determined as 4.00, 13.2 µg L^??1, 10 and 3.2%, respectively. The proposed microextraction procedure was successfully applied to copper contents of the liver samples.     

Preparation of calix[4]arene-based sporopollenin and examination of its dichromate sorption ability

The present study describes the preparation of a new calix[4]arene-based sporopollenin material and its application for the removal of Na₂Cr₂O₇ from aqueous solution. The novel calix[4]arene-based sporopollenin material was prepared via the immobilization of dihydrazine amide derivative of p-tert-butylcalix[4]arene (3) onto the modified sporopollenin. The newly prepared calix[4]arene-based sporopollenin is characterized by using different analytical techniques such as FT-IR spectroscopy, scanning electron microscope and Elemental analysis. The batch wise sorption study was carried out to optimize various experimental parameters such as the effect of sorbent dosage, pH, temperature and Cr(VI) anion concentration. It has been found that the sorption of Cr(VI) anion on calix[4]arene-based sporopollenin was highly pH dependent and maximum sorption was achieved at pH 1.5. The sorption behavior was also evaluated by Langmuir, Freundlich and Dubinin Radushkevich isotherms. The value of correlation coefficient (R ²) showed a good agreement with Freundlich isotherm model. Result of study demonstrated that calix[4]arene-based sporopollenin proved to be highly effective for the removal of Cr(VI).