Geometrically distributed aperiodic circular photonic crystals with broad and isotropic photonic band gaps

In this paper, a new type of circular photonic crystal (CPC) with a geometrical distribution of concentric layers is presented. A broad and isotropic photonic band gap is achieved using this geometrically distributed CPC (GCPC). Also, the influence of the number of concentric layers to the overall band gap of GCPC is studied. It is demonstrated that the band gap broadens with a red shift when the number of concentric layers is increased. The reason for the red shift of the band gap is further investigated.     

Sonodynamically induced anti-tumor effect with protoporphyrin IX on hepatoma-22 solid tumor

Objective

The purpose of this study was to evaluate sonodynamically induced anti-tumor effect of protoporphyrin IX (PPIX) in mice bearing hepatoma-22 (H-22) solid tumors, and the possible in vivo cell damage mechanism was also investigated.

Methods

The pharmacokinetics of PPIX was analyzed in plasma, skin, muscle and tumor of H-22 bearing mice. Tumors were irradiated with ultrasound (1.43 MHz, I_SATA 3 W/cm², 3 min) for three times at 8, 12 and 24 h after 5.0 mg/kg PPIX administration, respectively. The anti-tumor effects of sonodynamic therapy (SDT) were estimated by the tumor inhibition ratio (volume and weight). The bio-effects of SDT were evaluated by hematoxylin and eosin (H&E) staining, transmission electron microscope (TEM) observation, lipid peroxidation (LPO) measurement and anti-oxidative enzymes (glutathione peroxidase (GSH-PX), catalase (CAT) and superoxide dismutase (SOD)) assay.

Results

A significant anti-tumor effect was obtained by PPIX-mediated sonodynamic therapy (PPIX-SDT). At the fifteenth day after PPIX-SDT, the tumor growth and tumor weight inhibition ratios were 53.84% and 45.86%, respectively. In addition, the structure of tumor tissues and the anti-oxidative enzymes were obviously destroyed after SDT treatment.

Conclusions

A biochemical mechanism was involved in PPIX-SDT in vivo, and the free radicals produced by the synergistic treatment destroying the anti-oxidative system of tumor cells in vivo may play an important role in this action. Also, the thermal effect could not be excluded in inducing damage of cellular structures, like membrane disruption and chromatin condensation under current evaluation in this paper.     

远场超分辨随机光重建显微镜(STORM)研究进展

了解细胞内分子尺度的动态和结构的特征是生命科学迫切需要解决的问题,要求远场光学成像要求纳米或亚纳米量级的空间分辨率.介绍了一种实现打破衍射极限的远场荧光显微成像技术--随机光重建显微术(STORM),其分辨率可以达到横向分辨率20 nm,轴向分辨率50 nm,理论上这种方法的空间分辨率可以达到单分子定位的精度.具体介绍...     

Synthesis of the chain-shaped carbon fibers decorated with SiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> beads by chemical vapor deposition

Chain-shaped carbon fibers decorated with SiO _x beads had been synthesized by using methyltriehlorosilane and normal carbon fibers as the raw materials, during which the chemical vapor deposition technique was applied. The products were characterized by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray diffraction (XRD) and Raman spectroscopy. The as-received products show chain-shaped morphologies that have the normal carbon fibers as “strings” and possess regular SiO _x beads of 30–40 μm with relative smooth surface. The formation of the chain-shaped morphology is considered to involve the shrinkage of the absorbed silica layer and the possible growth mechanism is further proposed. It is thought that the chain-shaped carbon fibers are formed by two main stages.     

环形电子束积分图像诊断技术

 采用图像诊断方法对高能环形电子束形状及空间尺寸进行了研究,以高能脉冲环形电子束轰击高Z靶材料产生脉冲X射线,X射线经过X射线增感屏转换为可见光,用单次图像采集系统获取可见光的积分图像。为满足诊断所需的空间分辨和系统灵敏度,通过理论计算确立了靶的材料、厚度及X射线增感屏的型号和厚度等参数。根据测试环境,设计了系统的现场安装结构,系统基本满足测试要求。分析从实验中获取的图像,可知环形电子束的内径为36.5 mm,环厚为1 mm,环形不均匀,水平方向电子束强。     

高损伤阈值三倍频分离膜

 设计了Nd：YAG激光用三倍频分离膜,膜层材料为SiO₂和HfO₂。经过优化,膜系在355 nm处的反射率在99%以上,在532 nm和1 064 nm处透射率也在99%以上。采用电子束蒸发技术,在熔融石英基底上制备了样品,经测量,制备的分离膜光学性能与设计值接近。分离膜在355 nm激光辐照下的损伤阈值为5.1 J/cm²,并用微分干涉显微镜表征了薄膜损伤形貌。     

Phase-controlled preparation of iron (oxyhydr)oxide nanocrystallines for heavy metal removal

Obtaining cost-effective iron (oxyhydr)oxide nanocrystallines is the essential prerequisite for their future extensive applications in environmental remediation, such as the removal of heavy metals from contaminated waters. Here, various phases of iron (oxyhydr)oxide nanocrystallines were simply synthesized from the phase-controlled transformation of amorphous hydrous ferric- or ferrous-oxide in thermal solution with a certain ethanol/water ratio and with the presence of oleic acid. According to this method, goethite nanorods in diameter of 3–4 nm, hematite nanocubes sized 20–30 nm, and magnetite nanoparticles in diameter of 6–7 nm were successfully obtained. The final products of this transformation can be conveniently controlled by adjusting the reaction parameters, such as pH, temperature, and ethanol/water ratio. Due to the enhanced specific surface area and probably the modifications of the surface structure of nanocrystallines, the as-synthesized goethite nanorods and magnetite nanoparticles demonstrated extremely strong As(III) affinity, with 5.8 and 54 times of As(III) adsorption, respectively, higher than the micron-sized relatives. The cost-effective feature of as-synthesized nanocrystallines and their remarkably enhanced affinity toward arsenic made them potentially applicable for the removal of arsenic and such like heavy metals from the contaminated environment.     

Preparation and the physical properties of antiperovskite-type compounds Cd_1-xIn_x NNi₃（0 ≤x≤ 0.2） and Cd_1-yCu_yNNi₃（0≤y≤0.2）

Two series of Cd1-xInx NNi3(0 ≤x≤ 0.2) and Cd1-yCuyNNi3(0≤y≤0.2) samples were prepared from CdO, In2O3 , CuO, and nickel powders under NH3 atmosphere at 773K. The structural and physical properties were investigated by means of X-ray powder diffraction temperature-dependent resistivity and magnetic measurements. X-ray powder diffraction results showed that the Cd 1 x In x NNi 3 and Cd 1 y Cuy NNi 3 compounds have a typical antiperovskite structure, and the CdNNi3, Cd0.9 In 0.1 NNi3 , and Cd0.9Cu0.1NNi3 compounds show metallic temperature-dependent resistivity and exhibit a Fermi liquid behavior at low temperature. In contrast to the paramagnetism previously reported, the CdNNi 3 sample exhibits very soft and weak ferromagnetism, and no superconductivity was found in the Cd 1 x In x NNi 3 and Cd 1 y Cu y NNi 3 samples down to 2 K. Each sample exhibited very soft and weak ferromagnetism, and the temperature dependence of the magnetization of the Cd 1-xInx NNi 3 and Cd1-y Cu y NNi 3 samples can be well fitted to the combination of a Bloch term and a Curie–Weiss term.     

First principles study of structural,phonon, optical,elastic and electronic properties of Y3Al5O12

Structural, phonon, optical, elastic and electronic properties of Y₃Al₅O₁₂ have been investigated by means of the first principles method with the Cambridge Serial Total Energy Package (CASTEP) code based on the density functional theory. The calculated lattice parameters, valence charge density, bond length and single crystal elastic properties at zero pressure are in good agreement with the available experimental data. The close agreement with the experimental values provides a good confirmation of the reliability of the calculations. Optical, elastic and phonon properties of Y₃Al₅O₁₂ under pressures are performed. The results that are obtained show the changes of optical and elastic properties under the influence of applied pressure, and proving the dynamical stability of YAG are destructed when applied pressure up to 7 GPa. Moreover, polycrystalline elastic moduli are deduced according to the Reuss assumption. Those elastic constants provide important parameters that describe reliability of both physical model and engineering application at the atomistic level. The result of the density of states explains the nature of the electronic band structure.     

Phase composition and tribological properties of Ti-Al coatings produced on pure Ti by laser cladding

Ti-Al coatings with ∼14.7, 18.1, 25.2 and 29.7 at.% Al contents were fabricated on pure Ti substrate by laser cladding. The laser cladding Ti-Al coatings were analyzed with X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray energy dispersive spectroscopy (EDS). It was found that with the increase of Al content, the diffraction peaks shifted gradually to higher 2θ values. The laser cladding Ti-Al coatings with 14.7 and 18.1 at.% Al were composed of α-Ti and α₂-Ti₃Al phases, while those with 25.2 and 29.7 at.% Al were composed of α₂-Ti₃Al phase. With the increase of Al content, the cross-sectional hardness increased, while the fracture toughness decreased. For the laser cladding Ti-Al coatings, when the Al content was ≤18.1 at.%, the wear mechanism was adhesive wear and abrasive wear; while when the Al content ≥25.2 at.%, the wear mechanism was adhesive wear, abrasive wear and microfracture. With the increase of Al content, the wear rate of laser cladding Ti-Al coatings decreased under 1 N normal load, while the wear rate firstly decreased and then increased under a normal load of 3 N. Due to its optimized combination of high hardness and high fracture toughness, the laser cladding Ti-Al coating with 18.1 at.% Al showed the best anti-wear properties at higher normal load.