Growth kinetics of borided layers: Artificial neural network and least square approaches

The present study evaluates the growth kinetics of the boride layer Fe₂B in AISI 1045 steel, by means of neural networks and the least square techniques. The Fe₂B phase was formed at the material surface using the paste boriding process. The surface boron potential was modified considering different boron paste thicknesses, with exposure times of 2, 4 and 6 h, and treatment temperatures of 1193, 1223 and 1273 K. The neural network and the least square models were set by the layer thickness of Fe₂B phase, and assuming that the growth of the boride layer follows a parabolic law. The reliability of the techniques used is compared with a set of experiments at a temperature of 1223 K with 5 h of treatment time and boron potentials of 2, 3, 4 and 5 mm. The results of the Fe₂B layer thicknesses show a mean error of 5.31% for the neural network and 3.42% for the least square method.     

Age-induced phase transitions on mechanically alloyed amorphous GaSe

After aging it for four years at room temperature, a mechanically alloyed amorphous GaSe powder was transformed to a multi-phase crystalline alloy, where major phase is the trigonal Se one. The structural, thermal and optical properties of this aged amorphous GaSe were investigated through systematic X-ray diffraction, differential scanning calorimetry and Raman scattering measurements. The X-ray diffraction results on the aged GaSe powder suggest the presence of oxides, and X-ray absorption spectroscopy was employed to further investigate it.     

On the asymmetric representatives formulation for the vertex coloring problem

We consider the vertex coloring problem, which can be stated as the problem of minimizing the number of labels that can be assigned to the vertices of a graph G such that each vertex receives at least one label and the endpoints of every edge are assigned different labels. In this work, the 0-1 integer programming formulation based on representative vertices is revisited to remove symmetry. The previous polyhedral study related to the original formulation is adapted and generalized. New versions of facets derived from substructures of G are presented, including cliques, odd holes and anti-holes and wheels. In addition, a new class of facets is derived from independent sets of G. Finally, a comparison with the independent sets formulation is provided.     

Structural assessment under uncertain parameters via interval analysis

An efficient health monitoring system for damage detection in civil engineering structures using on-line monitoring data is being developed to identify any possible damage in short time. The present work is based on the treatment of uncertainties, which is one of the basic common difficulties faced when modelling structures. A methodology, based on interval analysis (IA) theory [R.E. Moore, Interval Analysis, Prentice-Hall, Englewood Cliffs, NJ, 1966] applied to a numerical constraint satisfaction problem (CSP) [J.R. Casas, J.C. Matos, J.A. Figueiras, J. Vehí, O. García, P. Herrero, Bridge monitoring and assessment under uncertainty via interval analysis, in: Ninth International Conference On Structural Safety And Reliability—ICOSSAR2005, 2005. pp. 487–494], is implemented in the damage detection [J.R. Casas, J.C. Matos, J.A. Figueiras, J. Vehí, O. García, P. Herrero, Bridge monitoring and assessment under uncertainty via interval analysis, in: Ninth International Conference On Structural Safety And Reliability—ICOSSAR2005, 2005. pp. 487–494] and modelling system of a long-term monitoring project in order to achieve such an objective. An algorithm is being developed for using such methodology with the obtained data.     

A Validated RP–LC Method for Simultaneous Determination of Losartan Potassium and Amlodipine Besilate in Pharmaceutical Preparations

A simple RP–LC method for simultaneous quantification of losartan and amlodipine and separation of their degradation products has been developed. For this purpose we tested appropriated mobile phase pH range, flow rate, temperature and different columns. The method was validated with an ODS column. A gradient of acetonitrile and phosphate pH 3.0 buffer was utilized as mobile phase. The linearity was determined at 50–150% level. Individual recoveries at 70–130% level ranged from 98.8 to 100.5% for losartan and 96.4–101.2% for amlodipine. The robustness was also evaluated. Although losartan has much higher quantities than amlodipine in commercial tablets, this method allowed simultaneous quantification for both drugs.     

A multipotential hydrolytic reactor using the yeast strainKluyveromyces marxianus

In previous publications, we described the continuous production of D-fructose from enzymatic hydrolysis of inulin with immobilized permeabiliized cells ofKluyveromyces marxianus and the increase of productivity obtained by using a mutant selected by NTG action on the wild-type strain. By improving reactor performance, it has been possible to reach 2000 g/L/d of liberated sugar from an inulin solution with the mutant strain.

In addition, it has been shown that the KF 28 mutant was an invertase and pectinase hyperproducer. These enzymatic activities are also secreted by the speciesKluyveromyces marxianus. Therefore, we investigated the possibility of using immobilized cells of this yeast as a multipotential hydrolysis reactor. A sucrose hydrolysis reactor and a pectin hydrolysis reactor were set up. It is shown here that the majority of the optimized parameters from the inulin hydrolysis reactor can be transported directly to the other reactors. However, some parameters have to be adapted, especially for pectin hydrolysis.

     

Need for food reference material in Latin America

Summary Even if some Latin American countries still need to extend their capacity for food quality control, many do have good control laboratories and high quality research institutions. That makes the need for reference material in Latin America similar to that of other parts of the world.The region has special problems related to mail and shipment delays, and to the lack of information on available reference material. It is recommended that additional reference material being made available for vitamins in food, for polar and non-polar organophosphorus pesticides in vegetables, for organophosphorus pesticide and veterinary drugs in meat etc.Reference material should simulate real samples as closely as possible; reference samples for water should contain phthalates which in environmental samples interfere with organochlorines and reference material for organophosphates in vegetables should contain metabolites and degradation products.It is also recommended that commercial standards for trace metals should have the production date and the guaranteed stability printed on the label. Information on reference material should be included in the methods published by AOAC, AOCS and similar publications.     

Determination of total arsenic in seawater by hydride generation atomic fluorescence spectrometry

In this work, the determination of total As in seawater by hydride generation atomic fluorescence spectrometry was studied. The influence of the chemical, flow and instrumental parameters were investigated and optimized. The pre-reduction of As(V) to As(III) was performed using KI plus ascorbic acid in 3.5 mol L^− 1 HCl medium. No multiplicative interference was present and external aqueous calibration could be used. The limit of detection was 36 ng L^− 1, while the repeatability was 2% (n = 10), at a 500 ng L^− 1 concentration level. The sample throughput was 15 h^− 1 if triplicate measurements were made. The accuracy was assessed by the analysis of a seawater certified reference material and excellent agreement between the obtained and certified values was verified. The procedure was used for the analysis of seawater offshore samples collected at the Brazilian coast and results ranging from 860 to 1200 ng L^− 1 were found.