Effect of mating delay on the ovary of Melipona quadrifasciata anthidioides (Hymenoptera: Apidae) queens

The effect of mating delay on the ovary structure of virgin queens of Melipona quadrifasciata anthidioides (Hymenoptera: Apidae) was investigated. Virgin queens 15, 20, 25 and 30 days old were dissected to analyze their degree of ovary degeneration. To verify whether the degeneration would cause permanent sterility, virgin queens of the same ages (15, 20, 25 and 30 days) were mated and accompanied for at least 14 days to verify whether there was physogastry and then dissected. The ovaries were analyzed by histology, histochemical tests and TUNEL to verify programmed cell death. The results showed that mating delay interrupted oogenesis preventing vitellogenesis. Mating delay results in ovary degeneration which increased with queen age. However, even when there was ovariole degeneration, 25-day-old virgin queens after mating presented normal ovariole activation.     

Pharmaceutical approaches involving carvedilol characterization,compatibility with different excipients and kinetic studies

This study was performed to investigate the physical–chemical characteristics of carvedilol (CRV), complemented by compatibility studies with a great variety of pharmaceutical excipients. Thermogravimetry and differential scanning calorimetry, supported by diffuse reflectance infrared fourier transform spectroscopy (DRIFT), X-ray powder diffraction, and scanning electron microscopy (SEM) were selected as the solid-state techniques for the intended analyses. In addition, non-isothermal methods were employed to investigate kinetic data of CRV decomposition process under nitrogen and air atmospheres. CRV is characterized by an endothermic sharp event (T _peak = 389.81 K and ΔH _fusion of ?176.28 J g^?1) and a thermal decomposition behavior in two stages, totalizing 98 % of mass loss. The CRV pattern diffraction presents prominent peaks at 2θ: 5.92°, 14.90°, 18.62°, 24.47°, and 26.30°, and the DRIFT spectrum showed the main characteristics bands for CRV chemical functional groups. The SEM photomicrographs demonstrate that CRV is characterized by irregular blocky shaped crystals. Zero order kinetics was determined by Ozawa method in both nitrogen and air atmospheres. The compatibility results showed no evidence of any incompatibility among CRV and all the excipients analyzed.     

HOMO Stabilisation in π‐Extended Dibenzotetrathiafulvalene Derivatives for Their Application in Organic Field‐Effect Transistors

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB‐TTF) central core and a 2,1,3‐chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB‐TTF, have been synthesised as active materials for organic field‐effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron‐withdrawing 2,1,3‐chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution‐processed single‐crystal transistors exhibit high performance with a hole mobility up to 0.04 cm² V^?1 s^?1 as well as good ambient stability.     

A Carbene‐Rich but Carbonyl‐Poor [Ir6(IMe)8(CO)2H14]2+ Polyhydride Cluster as a Deactivation Product from Catalytic Glycerol Dehydrogenation

The title cluster, a deactivation product in the catalytic dehydrogenation of glycerol, was characterized by XRD, DFT calculations, HRMS, FTIR spectroscopy, and NMR spectroscopy. Experimental/computational studies located the 14 H ligands, and all ¹H and ¹³C{¹H} NMR resonances were assigned. The structure contains an unprecedented Ir₆H₁₄ core with two CO and eight IMe ligands.     

Isolation and Immobilization of Influenza Virus-Specific N-SA-α-2,3-Gal Receptors Using Magnetic Nanoparticles Coated with Chitosan and Maackia amurensis Lectin

Avian influenza viruses preferentially bind to sialic acid alpha-2,3-galactose (N-SA-α-2,3-Gal) receptors on epithelial cells. Herein, we describe a procedure we have developed for isolation of N-SA-α-2,3-Gal receptors from porcine trachea using magnetic nanoparticles (NPs) coated with chitosan (NP-Ch) and functionalized with Maackia amurensis lectin (NP-lectin). Magnetic nanoparticles were coated with chitosan in a one-step co-precipitation, and then M. amurensis lectin was immobilized covalently using glutaraldehyde. Lectin coated nanoparticles were incubated with sialic acid enriched fraction of tracheal homogenate, and N-SA-α-2,3-Gal receptor was extracted under magnetic field in two cycles. The presence of 66.4 kDa protein was determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The interaction of immobilized receptor (NP-Ch-R) with M. amurensis lectin (NP-Ch-R-L) was demonstrated by Fourier transform infrared spectrometry (FTIR) and thermogravimetric analysis (TGA).     

Production of a Bioemulsifier with Potential Application in the Food Industry

Biosurfactants are of considerable interest due to their biodegradability, low degree of toxicity, and diverse applications. However, the high production costs involved in the acquisition of biosurfactants underscore the need for optimization of the production process to enable viable application on an industrial scale. The aims of the present study were to select a species of Candida that produces a biosurfactant with the greatest emulsifying potential and to investigate the influence of components of the production medium and cultivation conditions. Candida utilis achieved the lowest surface tension (35.53 mN/m), best emulsification index (73 %), and highest yield (12.52 g/l) in a medium containing waste canola frying oil as the carbon source and ammonium nitrate as the nitrogen source. The best combination of medium components and cultivation conditions was 6 % (w/v) glucose, 6 % (w/v) waste canola frying oil, 0.2 % (w/v) ammonium nitrate, 0.3 % (w/v) yeast extract, 150 rpm, 1 % inoculum (w/v), and 88 h of fermentation. The greatest biosurfactant production and the lowest surface tension were achieved in the first 24 h of production, and the maximum biomass production was recorded at 72 h. The biosurfactant produced from C. utilis under the conditions investigated in the present study has a potential to be a bioemulsifier for application in the food industry.     

Mullite crystallization using fully hydrolyzed silica sol: the gelation temperature influence

Mullite is an aluminosilicate widely used as a structural material for high temperature applications. This paper studies the effect of the gelation temperature on the synthesis of two mullite precursors: polymeric and colloidal silica, using both in fully-hydrolyzed silica sol, derived from sodium silicate. The gels were synthesized using aqueous silicic acid and aluminum nitrate. Ethylene glycol was added into polymeric gels. Two gelation temperatures were used: 80 and 100 °C. In the polymeric precursor, the increasing of the gelation temperature caused an increase in the silica incorporation inside the mullite crystalline lattice at 1,000 °C, and it also generated an increase in the reaction extent at all calcination temperatures. In the colloidal precursors, these effects were more intense than in the polymeric precursors in terms of yield. Colloidal samples calcined at 1,250 °C crystallized cristobalite and alpha alumina in addition to mullite when they were previously gelled at 80 °C. On the other hand, the same sample gelled at 100 °C led to only crystallized mullite. The reaction extent increased by more than 20 % for colloidal samples gelled at 100 °C compared to colloidal samples gelled at 80 °C (calcined at 1,250 °C). This increase was due to the almost total incorporation of alumina and silica in the crystalline lattice of mullite.     

Simulation of Organic Liquid Product Deoxygenation through Multistage Countercurrent Absorber/Stripping Using CO2 as Solvent with Aspen-HYSYS: Process Modeling and Simulation

In this work, the deoxygenation of organic liquid products (OLP) obtained through the thermal catalytic cracking of palm oil at 450 °C, 1.0 atmosphere, with 10% (wt.) Na₂CO₃ as a catalyst, in multistage countercurrent absorber columns using supercritical carbon dioxide (SC-CO₂) as a solvent, with an Aspen-HYSYS process simulator, was systematically investigated. In a previous study, the thermodynamic data basis and EOS modeling necessary to simulate the deoxygenation of OLP was presented. This work addresses a new flowsheet, consisting of 03 absorber columns, 10 expansions valves, 10 flash drums, 08 heat exchanges, 01 pressure pump, and 02 make-ups of CO₂, aiming to improve the deacidification of OLP. The simulation was performed at 333 K, 140 bar, and (S/F) = 17; 350 K, 140 bar, and (S/F) = 38; 333 K, 140 bar, and (S/F) = 25. The simulation shows that 81.49% of OLP could be recovered and that the concentrations of hydrocarbons in the extracts of absorber-01 and absorber-02 were 96.95 and 92.78% (wt.) on a solvent-free basis, while the bottom stream of absorber-03 was enriched in oxygenated compounds with concentrations of up to 32.66% (wt.) on a solvent-free basis, showing that the organic liquid products (OLP) were deacidified and SC-CO₂ was able to deacidify the OLP and obtain fractions with lower olefin contents. The best deacidifying condition was obtained at 333 K, 140 bar, and (S/F) = 17.     

Poole-Frenkel effect in amorphous poly(p-phenylene sulfide)

The conductivity of poly(p-phenylene sulfide) (PPS) amorphous samples sandwiched between metallic electrodes has been studied as a function of applied voltage, temperature, and electrode material. The voltage (U) dependence of the currents for electric fields within the range 10³–10⁶ V/cm exhibits exp βU^1/2 behavior with β = β_Schottky below the glass transition temperature (T_g ≊ 90°C), and β = β_{Poole-Frenkel} above T_g. Coordinated temperature measurements of dc currents with different metallic contacts and thermally stimulated currents (TSC) indicate, however, that the conductivity at T < T_g is consistent with the so-called “anomalous” Poole-Frenkel effect rather than the Schottky effect. Consequently, the p-type conductivity in amorphous PPS is proposed to be a bulk-limited process due to ionization of two different types of acceptor centers in the presence of neutral hole traps. © 1996 John Wiley & Sons, Inc.