Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004     

Alkane oxygenation with H2O2 catalysed by FeCl3 and 2,2′-bipyridine

The H₂O₂-FeCl₃-bipy system in acetonitrile efficiently oxidises alkanes predominantly to alkyl hydroperoxides. Turnover numbers attain 400 after 1 h at 60 °C. It has been assumed that bipy facilitates proton abstraction from a H₂O₂ molecule coordinated to the iron ion (these reactions are stages in the catalytic cycle generating hydroxyl radicals from the hydrogen peroxide). Hydroxyl radicals then attack alkane molecules finally yielding the alkyl hydroperoxide.     

Addressing the metabolic activation potential of new leads in drug discovery: a case study using ion trap mass spectrometry and tritium labeling techniques

Metabolic activation of drug candidates to electrophilic reactive metabolites that can covalently modify cellular macromolecules may result in acute and/or idiosyncratic immune system-mediated toxicities in humans. This presents a significant potential liability for the future development of these compounds as safe therapeutic agents. We present here an example of an approach where sites of metabolic activation within a new drug candidate series were rapidly identified using online liquid chromatography/multi-stage mass spectrometry on an ion trap mass spectrometer. This was accomplished by trapping the reactive intermediates formed upon incubation of compounds with rat and human liver microsomes as their corresponding glutathione conjugates and mass spectral characterization of these thiol adducts. Based on the structures of the GSH adducts identified, potential sites and mechanisms of bioactivation within the chemical structure were proposed. These metabolism studies were interfaced with iterative structural modifications of the chemical series in order to block these bioactivation sites within the molecule. This strategy led to a significant reduction in the propensity of the compounds to undergo metabolic activation as evidenced by reductions in the irreversible binding of radioactivity to liver microsomal material upon incubation of tritium-labeled compounds with this in vitro system. With the efficiency and throughput achievable with such an approach, it appears feasible to identify and address the metabolic activation potential of new drug leads during routine metabolite identification studies in an early drug discovery setting.     

Trinuclear heterobimetallic complexes with binucleating dithioxamides: stereoselective synthesis and solution behavior involving Pd-N bond rupture

Bischelate platinum(II) complexes of the type [Pt(H-R(2)-N(2)C(2)S(2))(2)] (H-R(2)-N(2)C(2)S(2)(-) = dialkyl-dithioxamidate) are ditopic receptors which, after coordination of the first Pd(eta(3)-allyl)(+) moiety, induce the orientation of the second palladium-allyl fragment. Thus, a series of trimetallic complexes of formula bis-[(eta(3)-allyl)-palladium(II)](mu-bis-dialkyl-dithioxamidate-platinum(II) kappa-S,S-kappa-S',S'-Pt-kappa-N,N-Pd-kappa-N',N'-Pd') has been prepared in which the allyl fragments are oriented toward the same side of the molecular plane. We have also prepared the trimetallic complex using a dithioxamide obtained from the racemic phenylethylamine. Only two isomers were produced in equimolar ratio: the racemate that has four homochiral alkyl substituents and the mesoform containing the meso-dithioxamide that has homochiral substituents on the same side of molecular plane. Under the effect of the temperature, the trimetallic Pd-Pt-Pd complexes undergo rapid allyl isomerization; the mechanism of the isomerization, which is similar to that found by us in an analogue Pt-Pd bimetallic complex, is discussed. The crystal and molecular structure of bis-[(eta(3)-allyl)-palladium(II)](mu-bis-[S]-phenylethyl-dithioxamidate-platinum(II) kappa-S,S-kappa-S',S'-Pt-kappa-N,N-Pd-kappa-N',N'-Pd') has been reported.     

Atmospheric degradation of 2-butanol, 2-methyl-2-butanol, and 2,3-dimethyl-2-butanol: OH kinetics and UV absorption cross sections

The absolute rate coefficients for the reactions of hydroxyl radical (OH) with 2-butanol (k(1)), 2-methyl-2-butanol (k(2)), and 2,3-dimethyl-2-butanol (k(3)) were measured as a function of temperature (263-354 K) and pressure (41-193 Torr of He, Ar, and N(2)) by the pulsed laser photolysis/laser-induced fluorescence technique. This work represents the first absolute determination of k(1)(-)k(3) and their temperature dependence. No pressure dependence of the rate coefficients was observed in the range studied. Thus, k(i)(298 K) values (x10(-12) cm(3) molecule(-1) s(-1) with an uncertainty of +/-2sigma) were averaged over the pressure range studied yielding 8.77 +/- 1.46, 3.64 +/- 0.60, and 9.01 +/- 1.00 for 2-butanol (k(1)), 2-methyl-2-butanol (k(2)), and 2,3-dimethyl-2-butanol (k(3)), respectively. k(1) and k(3) exhibit a slightly negative temperature dependence over the temperature range studied. In contrast, the rate coefficient for the reaction of OH with 2-methyl-2-butanol (k(2)) did not show any temperature dependence. Some deviation of the conventional Arrhenius behavior was clearly observed for k(3). In this case, the best fit to our data was found to be described by the three-parameter expression k(T) = A + B exp(-C/T). The UV absorption cross sections of 2-butanol, 2-methyl-2-butanol, and 2,3-dimethyl-2-butanol have also been measured at room temperature between 208 and 230 nm. The values reported constitute the first determination of the UV cross sections of those alcohols. Our results are compared with previous studies, when possible, and are discussed in terms of the H-abstraction by OH radicals. The atmospheric implications of these reactions and the photochemistry of these alcohols are also discussed.     

Design of pure heterodinuclear lanthanoid cryptate complexes

Heterolanthanide complexes are difficult to synthesize owing to the similar chemistry of the lanthanide ions. Consequently, very few purely heterolanthanide complexes have been synthesized. This is despite the fact that such complexes hold interesting optical and magnetic properties. To fine-tune these properties, it is important that one can choose complexes with any given combination of lanthanides. Herein we report a synthetic procedure which yields pure heterodinuclear lanthanide cryptates LnLn*LX₃ (X = NO₃⁻ or OTf⁻) based on the cryptand H₃L = N[(CH₂)₂N CH–R–CH N–(CH₂)₂]₃N (R = m-C₆H₂OH-2-Me-5). In the synthesis the choice of counter ion and solvent proves crucial in controlling the Ln–Ln* composition. Choosing the optimal solvent and counter ion afford pure heterodinuclear complexes with any given combination of Gd(iii)–Lu(iii) including Y(iii). To demonstrate the versatility of the synthesis all dinuclear combinations of Y(iii), Gd(iii), Yb(iii) and Lu(iii) were synthesized resulting in 10 novel complexes of the form LnLn*L(OTf)₃ with LnLn* = YbGd 1, YbY 2, YbLu 3, YbYb 4, LuGd 5, LuY 6, LuLu 7, YGd 8, YY 9 and GdGd 10. Through the use of ¹H, ¹³C NMR and mass spectrometry the heterodinuclear nature of YbGd, YbY, YbLu, LuGd, LuY and YGd was confirmed. Crystal structures of LnLn*L(NO₃)₃ reveal short Ln–Ln distances of ∼3.5 Å. Using SQUID magnetometry the exchange coupling between the lanthanide ions was found to be anti-ferromagnetic for GdGd and YbYb while ferromagnetic for YbGd.

We present a synthetic strategy to prepare the first heterodinuclear lanthanide(iii) cryptate complexes. The cryptate design ensures that the complexes are stable in solution for days. The exchange coupling in YbYb, GdGd and YbGd is investigated.     

A critical study on the determination of selenium in gallium arsenide by polarographic techniques

A simple voltammetric method is described for the determination of traces of selenium in gallium arsenide. Differential-pulse cathodic stripping voltammetry permits a direct determination of selenium without preliminary enrichment or separation processes. Selenium can be determined down to levels of 1–2 μg g^?1, with relative standard deviations of about 10%, in ? 100-mg samples of gallium arsenide. Results for gallium arsenide doped with 7–75 μg g^?1 selenium agree in most cases with those obtained by spectrophotometry based on 4-chloro-o-phenylenediamine.     

The membrane free sonoelectroanalytical determination of trace levels of lead and cadmium in human saliva

In this paper, square wave anodic stripping voltammetry (SWASV), synergistically coupled with an ultrasonically enhanced preconcentration step has been shown to yield a quantitative determination of lead and cadmium in human saliva at a membrane free in situ plated mercury thin film glassy carbon electrode. The sensitivity was facilitated by acoustic streaming which promoted efficient mass transport to the electrode thus reducing sampling times. Cavitation was responsible for cleaning and activating the electrode surface, this was essential in order to obtain a reproducible and representative signal. In silent conditions electrode fouling leading to fluctuations in the baseline current and signal depression, precluded accurate quantitative analyses. The results presented herein provide an extension to the proof of concept given in the authors' earlier work, with the analysis of lead in human saliva as opposed to artificial saliva reported. We also address the hitherto unreported detection and determination of cadmium in this medium. Results for both were independently verified by inductively coupled plasma-mass spectroscopy (ICP-MS). Close agreement between lead concentration determined by sono-SWASV and independent and blind ICP-MS is reported for human saliva samples having a total lead content of 0.92 microg L(-1) and 5 microg L(-1) with a detection limit of 0.5 microg L(-1). Microaddition calibration data for cadmium additions of 0.0125 microg L(-1) to samples spiked with 2.5 microg L(-1) and 5.0 microg L(-1) (reflecting levels in workers occupationally exposed) exhibited close agreement with the known total cadmium in the samples. A detection limit of 1 microg L(-1) cadmium in saliva has been established.     

Regiochemical Control and Suppression of Double Bond Isomerization in the Heck Arylation of 1-(Methoxycarbonyl)-2,5-dihydropyrrole

Arylation of 1-(methoxycarbonyl)-2,5-dihydropyrrole under standard Heck reaction conditions produces a mixture of compounds. The olefin undergoes two types of palladium-catalyzed reactions: (a) arylation to provide C-3 arylated derivatives and (b) competing double bond isomerization. Addition of silver carbonate and thallium acetate fully suppressed the isomerization, and good yields of C-3 substituted compounds were achieved after arylation with aryl halides. With regard to aryl triflates as arylating agents, addition of lithium chloride was necessary to promote the Heck reaction. This additive excluded the use of silver and thallium salts, but high regioselectivity and good yields could be obtained by employing tri-2-furylphosphine as ligand. Arylation was rendered both regioselective and enantioselective (58% ee) with 1-naphthyl triflate as substrate utilizing a (R)-BINAP/thallium acetate combination. The C-3 arylated enamides were converted further into the corresponding 3-arylpyrrolidines.