The Counterion Effect on the Assembly of Coordination Networks of Cationic (η3‐Allyl)palladium Complexes Containing 3,5‐Dimethyl‐4‐nitro‐1H‐pyrazole

Two new (η³‐allyl)palladium complexes containing the ligand 3,5‐dimethyl‐4‐nitro‐1H‐pyrazole (Hdmnpz) were synthesized and characterized as [Pd(η³‐C₃H₅)(Hdmnpz)₂]BF₄ ( 1 ) and [Pd(η³‐C₃H₅)(Hdmnpz)₂]NO₃ ( 2 ). The structures of these compounds were determined by single‐crystal X‐ray diffraction to evaluate the intermolecular assembly. Each complex exhibits similar coordination behavior consistent with cationic entities comprised of two pyrazole ligands coordinated with the [Pd(η³‐C₃H₅)]⁺ fragment in an almost square‐planar coordination geometry. In 1 , the cationic entities are propagated through strong intermolecular H‐bonds formed between the pyrazole NH groups and BF ions in one‐dimensional polymer chains along the a axis. These chains are extended into two‐dimensional sheet networks via bifurcated H‐bonds. New intermolecular interactions established between NO₂ and Me substituents at the pyrazole ligand of neighboring sheets give rise to a three‐dimensional network. By contrast, compound 2 presents molecular cyclic dimers formed through N? H???O H‐bonds between two NO counterions and the pyrazole NH groups of two cationic entities. The dimers are also connected to each other through C? H???O H‐bonds between the remaining O‐atom of each NO ion and the allyl CH₂ H‐atom. Those interactions expand in a layer which lies parallel to the face (101).     

A study of the compositional variation of the essential oil of ylang-ylang (Cananga odorata Hook Fil. et Thomson,formagenuina) during flower development

Volatile secondary metabolites from Colombian ylang-ylang flowers were obtained by combined steam distillation - solvent extraction. The samples were analyzed by high resolution gas chromatography with flame ionization, nitrogen/phosphorus, or mass spectrometric detection. The chemical composition of the oils extracted from flowers at different stages of development differed both qualitatively and quantitatively. The generation of total volatile metabolites, light oxygenated compounds in particular, increased markedly during flower maturation. In this work the quality of the ylang-ylang essential oils was studied as a function of flower maturity.     

Simultaneous spectrophotometric determination of cadmium, copper and zinc

A method for the simultaneous spectrophotometric determination of cadmium, copper and zinc based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene)thiocarbonohydrazide is proposed. The absorption curves of these complexes overlap severely in the scanning range 380–480 nm. The analyte concentrations are calculated by a least squares fit of the pure spectra to the mixture spectra. A linear determination range of 0.1–1.7 μg/ml for cadmium, 0.1–1.3 μg/ml for copper and 0.2–1.2 μg/ml for zinc were obtained. The effect of interference was studied. The method has been applied to the determination of these metal ions in various type of materials.     

Biocatalytic removal of nickel and vanadium from petroporphyrins and asphaltenes

Asphaltenes from a crude oil rich in heavy metals (Castilla crude oil) were fractionated and partially characterized. Biocatalytic modifications of these fractionated asphaltenes by three different hemoproteins: chloro-peroxidase (CPO), cytochrome C peroxidase (Cit-C), and lignin peroxi-dase (LPO) were evaluated in both aqueous buffer and organic solvents. The reactions were carried out in aqueous buffers, ternary systems of toluene: isopropanol: water, and aqueous-miscible organic solvent solutions with petroporphyrins as substrate. The petroporphyrins were more soluble in the ternary systems and aqueous miscible-organic solvent systems than in the aqueous buffer systems. However, only the CPO-mediated reactions were effective in eliminating the Soret peak in both aqueous and organic solvent systems. The effects of CPO-mediated reactions on the release of the metals complexed with the porphyrins and asphaltenes were also determined. Chloroperoxidase was able to alter components in the heavy fractions of petroleum and remove 53 and 27% of total heavy metals (Ni and V, respectively) from petroporphyrin-rich fractions and asphaltenes     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.     

Infrared spectrum of benzene in bromine and carbon tetrachloride solutions

The benzene—bromine complex at room temperature has been re-studied by infrared with bromine in excess of benzene. Solutions of 0.225 M benzene in bromine—carbon tetrachloride mixtures were studied. Under this condition, the spectral changes of measurable benzene absorption bands were observed more clearly than previously. The out-of-plane vibrations of benzene were observed to shift to higher frequencies. The equilibrium constant was found to be 0.11 ? mole^?1. The accord with the equilibrium constant derived from benzene rich systems supports the concept of a specific interaction. A C_6V symmetry is favoured for the geometry of the complex.     

Periodic solutions for second order singular damped differential equations

We study the existence of positive periodic solutions for second order singular damped differential equations by combining the analysis of the sign of Green?s functions for the linear damped equation, together with a nonlinear alternative principle of Leray–Schauder. Recent results in the literature are generalized and significantly improved.     

Turbulence in microfluidics: Cleanroom-free,fast, solventless,and bondless fabrication and application in high throughput liquid-liquid extraction

This paper addresses an important breakthrough in the deployment of ultra-high adhesion strength microfluidic technologies to provide turbulence at harsh flow rate conditions. This paper is only, to our knowledge, the second reporting on the generation of high flow rate-assisted turbulence in microchannels. This flow solves a crucial bottleneck in microfluidics: the generation of high throughput homogeneous mixings. We focused on the fabrication of bulky polydimethylsiloxane (PDMS) microchips (without any interfaces) rather than the laborious surface modifications that were employed in the first reporting about turbulence-assisted microfluidics. The fabrication is cleanroom-free, simple, low-cost, fast, solventless, and bondless requiring only a laboratory oven. More specifically, our method relies on the shaping of a nylon scaffold, cure of PDMS with embedded nylon, and removal of this scaffold. The scaffold was obtained by manually wrapping nylon threads. The withdrawing out of the scaffold was completed in few seconds using only a plier. Such microchannels endured flow rates of up to 60.0 mL min⁻¹ with a strikingly low elastic deformation. The importance in producing turbulence into microscale channels was successfully shown in liquid-liquid extractions. The great energy dissipation rate relative to the turbulence created high throughput and efficient extractions in microfluidics for the first time. The residence time was only 0.01 s at 25.0 mL min⁻¹ (total flow rate of the immiscible phases). In addition, the partition coefficient determined in a single run was similar to that obtained by the conventional batch shake-flask method that was realized in triplicate.