Determination of mercury in gasoline diluted in ethanol by GF AAS after cold vapor generation, pre-concentration in gold column and trapping on graphite tube

A simple method for the determination of mercury in gasoline samples diluted with ethanol by graphite furnace atomic absorption spectrometry (GF AAS) after cold vapor (CV) generation, pre-concentration in a gold column and trapping on a graphite tube is proposed. The methodology is based upon conventional analytical processes that can be performed by any laboratory with a chemical generation and gold amalgamation systems coupled to the atomic absorption spectrometer. The GF AAS temperature was optimized, being the retention, pyrolysis and atomization temperatures, respectively, 100 °C, 150 °C and 800 °C. Gasoline samples were prepared simply by forming a 2-fold diluted solution in ethanol. The mercury formed vapors by reacting the sample with the reducing agent were pre-concentrated in a gold column and further retained on a graphite tube, coated with gold as permanent modifier. Five samples from different gas stations around the UFSC Campus (Florianópolis, Brazil) were analyzed and the Hg concentrations were found to be in the range from 0.40 µg L^− 1 to 0.90 µg L^− 1. Calibration against aqueous standard solutions in acidic medium was carried out. The standard solutions had about the same viscosity as the gasoline diluted in ethanol. The relative standard deviations were lower than 2.4% for the samples. The limits of detection in the samples were 0.08 and 0.14 µg L^− 1, with and without pre-concentration in the gold column, respectively. The accuracy of the method was estimated by applying the recovery test and recovery values between 92 and 100% were obtained. A sample throughput of 4 h^− 1 was achieved. Simplicity and high detection capability are some of the qualities of the method.     

Internal standard in flow injection analysis with amperometric detection

In this work, we describe for the first time the use of the internal standard method in flow injection analysis (FIA) with amperometric detection. The method is based on the application of sequential potential pulses to the working electrode in an electrochemical flow cell. The sequence of potential pulses is selected in such a way that the analyte and internal standard compound are detected and monitored individually and independently at the same working electrode. This approach compensates for random errors associated with variations of flow rate, injection volume, ionic strength difference between standards and samples, and accidental insertion or formation of air bubbles in the carrier stream. In addition, this method can overcome the major drawback of amperometric detection using solid electrodes, which is gradual electrode passivation. To illustrate the potential of this method, the flow-injection amperometric detection of uric acid using [Fe(CN)₆]^3? as an internal standard (IS) is presented as an example.     

Mechanisms of Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation

For the last decade, a variant of pulsed laser ablation, Resonant-Infrared Matrix-Assisted Pulsed Laser Evaporation (RIR-MAPLE), has been studied as a deposition technique for organic and polymeric materials. RIR-MAPLE minimizes photochemical damage from direct interaction with the intense laser beam by encapsulating the polymer in a high infrared-absorption solvent matrix. This review critically examines the thermally-induced ablation mechanisms resulting from irradiation of cryogenic solvent matrices by a tunable free electron laser (FEL). A semi-empirical model is used to calculate temperatures as a function of time in the focal volume and determine heating rates for different resonant modes in two model solvents, based on the thermodynamics and kinetics of the phase transitions induced in the solvent matrices. Three principal ablation mechanisms are discussed, namely normal vaporization at the surface, normal boiling, and phase explosion. Normal vaporization is a highly inefficient polymer deposition mechanism as it relies on collective collisions with evaporating solvent molecules. Diffusion length calculations for heterogeneously nucleated vapor bubbles show that normal boiling is kinetically limited. During high-power pulsed-FEL irradiation, phase explosion is shown to be the most significant contribution to polymer deposition in RIR-MAPLE. Phase explosion occurs when the target is rapidly heated (10⁸ to 10¹⁰ K/s) and the solvent matrix approaches its critical temperature. Spontaneous density stratification (spinodal decay) within the condensed metastable phase leads to rapid homogeneous nucleation of vapor bubbles. As these vapor bubbles interconnect, large pressures build up within the condensed phase, leading to target explosions and recoil-induced ejections of polymer to a near substrate. Phase explosion is a temperature (fluence) threshold-limited process, while surface evaporation can occur even at very low fluences.     

Transversality conditions for infinite horizon variational problems on time scales

We consider problems of the calculus of variations on unbounded time scales. We prove the validity of the Euler–Lagrange equation on time scales for infinite horizon problems, and a new transversality condition.     

Radiation efficiency of a guitar top plate linked with edge or corner modes and intercell cancellation

This paper was based on a theoretical framework to determine strong and weak radiation by a guitar top plate, vibrating through deflections hard to analyze: multipolar mode shapes. The air-structure interaction was examined in terms of edge modes or corner modes, and considering even or odd number modes. A numerical model was implemented and experimentally calibrated, exhibiting several advantages exploring the coupling between vibratory and acoustic waves in a top plate. Two analyses were applied detecting high or low radiation efficiency for the structure. First, the addition of volume velocity for odd numbers of poles and cancellation for even numbers were examined. In fact, both behaviors can happen at the same time, as it was shown for a corner radiator case used as an example. Second, the ratio between bending and acoustic wavenumbers was explored. To illustrate the importance of this ratio, some theoretical features of a more efficient radiator than the corner mode were exposed in an edge mode example. Labeling multipolar mode shapes as efficient or inefficient radiators showed to be a useful alternative analyzing the top plate behavior. It can be applied knowing the nodal lines of the vibration pattern and estimating the bending and acoustic wavelengths.     

Generalization of the Cooper pairing mechanism for spin-triplet in superconductors

A generalization of the Cooper pairing mechanism is proposed which allows for a triplet state of lower energy. This is achieved by incorporating spin into the canonical commutation relations and by modifying the δ potential contact interaction. The gap equation contain as solutions both singlet and triplet states. It is shown that the triplet state is lower in energy than the singlet state which may explain the spin-triplet superconductivity observed.     

A metric space to study differences between polynucleotides

We introduce a new metric in the space of fuzzy polynucleotides.     

Quantum jumps induced by the center-of-mass motion of a trapped atom

We theoretically study the occurrence of quantum jumps in the resonance fluorescence of a trapped atom. Here, the atom is laser cooled in a configuration of level such that the occurrence of a quantum jump is associated to a change of the vibrational center-of-mass motion by one phonon. The statistics of the occurrence of the dark fluorescence period is studied as a function of the physical parameters and the corresponding features in the spectrum of resonance fluorescence are identified. We discuss the information which can be extracted on the atomic motion from the observation of a quantum jump in the considered setup.     

The corrections for non-ideal behavior of the epithermal neutron spectrum and the restitution of the simplicity in parametric activation analysis

The errors occurred when α, the parameter that accounts for the non-ideal behavior of the epithermal flux, are neglected, have been evaluated for the determination of twenty elements in biological materials, using. gold and sodium comparators, and zirconium to measure the thermal to epithermal flux ratio (f). Sodium allows the determination of 15 elements, and up to 18 elements can be determined in positions relatively well thermalized by the simultaneous use of gold and sodium comparators, in all the cases with errors ≦2%, when α is not considered. Results obtained for reference materials are presented.