Optimized determination of calcium in grape juice,wines, and other alcoholic beverages by atomic absorption spectrometry

This paper describes a study of the different methods of sample preparation for the determination of calcium in grape juice, wines, and other alcoholic beverages by flame atomic absorption spectrometry; results are also reported for the practical application of these methods to the analysis of commercial samples produced in Spain. The methods tested included dealcoholization, dry mineralization, and wet mineralization with heating by using different acids and/or mixtures of acids. The sensitivity, detection limit, accuracy, precision, and selectiviy of each method were established. Such research is necessary because of the better analytical indexes obtained after acid digestion of the sample, as recommended by the European Union, which advocates the direct method. In addition, although high-temperature mineralization with an HNO3-HCIO4 mixture gave the best analytical results, mineralization with nitric acid at 80 degrees C for 15 min gave the most satisfactory results in all cases, including those for wines with high levels of sugar and beverages with high alcoholic content. The results for table wines subjected to the latter treatment had an accuracy of 98.70-99.90%, a relative standard deviation of 2.46%, a detection limit of 19.0 microg/L, and a determination limit of 31.7 microg/L. The method was found to be sufficiently sensitive and selective. It was applied to the determination of Ca in grape juice, different types of wines, and beverages with high alcoholic content, all of which are produced and widely consumed in Spain. The values obtained for Ca were 90.00 +/- 20.40 mg/L in the grape juices, 82.30 +/- 23.80 mg/L in the white wines, 85.00 +/- 30.25 mg/L in the sweet wines, 84.92 +/- 23.11 mg/L in the red wines, 85.75 +/- 27.65 mg/L in the rosé wines, 9.51 +/- 6.65 mg/L in the brandies, 11.53 +/- 6.55 mg/L in the gin, 7.3 +/- 6.32 mg/L in the pacharán, and 8.41 +/- 4.85 mg/L in the anisettes. The method is therefore useful for routine analysis in the quality control of these beverages.     

Study of the first nucleation steps of thin films by XPS inelastic peak shape analysis

The initial steps in the formation of thin films have been investigated by analysis of the peak shape (both inelastic background and elastic contributions) of X‐ray photoelectron spectra. Surface coverage and averaged height of the deposited particles have been estimated for several overlayers (nanometre range) after successive deposition cycles. This study has permitted the assessment of the type of nucleation and growth mechanisms of the films. The experiments have been carried out in situ in the preparation chamber of an XPS spectrometer. To check the performance of the method, several materials (i.e. cerium oxide, vanadium oxide and cadmium sulfide) have been deposited on different substrates using a variety of preparation procedures (i.e. thermal evaporation, ion beam assisted deposition and plasma enhanced chemical vapour deposition). It is shown that the first deposited nuclei of the films are usually formed by three‐dimensional particles whose heights and degree of surface coverage depend on the chemical characteristics of the growing thin film and substrate materials, as well as the deposition procedure. It is concluded that XPS peak shape analysis can be satisfactorily used as a general method to characterize morphologically the first nanometric moieties that nucleate a thin film. Copyright © 2006 John Wiley & Sons, Ltd.     

Regioselective homogeneous hydrogenation of heteroaromatic nitrogen compounds by use of [RuH(CO)(NCMe)2(PPh3)2]BF4 as the precatalyst

Summary The complex [RuH(CO)(NCMe)₂(PPh₃)₂]BF₄ (1) is an efficient and regioselective catalyst precursor for the hydrogenation of polyaromatic nitrogen compounds such as quinoline (Q), isoquinoline (iQ), indole (ln), 5,6- and 7,8-benzoquinoline (BQ) and acridine (A) under relatively mild reaction conditions (125 °C, 4 atm H₂). The order of individual initial rates was: A > Q > 5,6-BQ > 7,8-BQ > ln > iQ, reflecting both steric and electronic effects. For the regioselective homogeneous hydrogenation of A to 9,10-dihydroacridine (DHA) catalysed by complex (1), a kinetic study was carried out; the experimentally determined rate law was r = k ₁ [Ru] [H₂]. These findings are consistent with a mechanism involving the hydrogenation of [RuH(CO)(A)(NCMe)(PPh₃)₂]BF₄ to yield DHA and the unsaturated species [RuH(CO)(NCMe)(PPh₃)₂]BF₄ in the rate-determining step.     

Magnetic properties of biacetyldihydrazone complexes

Summary Magnetic susceptibilities of the biacetyldihydrazone (BdH) complexes [M(BdH)₃](NO₃)₂ (M = Co^II, Ni^II, Cu^II or Zn^II), [Fe(BdH)₃](NO₃)₃, [M(BdH)₃](Ni(dto)₂] (M = Co^II, Ni^II or Zn^II; dto = dithiooxalate), [(BdH)₂Cu(dto)Ni(dto)] and [Fe(BdH)₃]₂[Ni(dto)₂]₃ have been studied in the 4.2–295 K range. Zn^II complexes are diamagnetic, and complexes of Ni^II, Cu^II and Fe^III obey the Curie-Weiss law. The Co^II complexes behave anomalously and the results are interpreted in terms of a high spinlow spin equilibrium.     

Selenium speciation by coupling vesicle mediated HPLC with off-line ETAAS and on-line focused microwave digestion HG-AAS detection

A novel High Performance Liquid Chromatography (HPLC) method for the separation of selenium species with specific detection by off-line Electrothermal Atomization Atomic Absorption Spectrometry (ETAAS) or on-line focused microwave digestion (MW) Hydride Generation Atomic Absorption Spectrometry (HG-AAS) is described. Vesicular mobile phases of the cationic surfactant didodecyldimethylammonium bromide (DDAB) have been evaluated for the liquid chromatographic separation of inorganic selenium (selenite and selenate) and different selenoaminoacids (selenocystine, selenomethionine and selenoethionine) on a C(18) reversed-phase column modified by DDAB molecules. The effects of different parameters (pH, buffer and vesicle concentrations) of the mobile phase on the retention times have been determined. The detection limit for selenium with the proposed off-line HPLC-ETAAS method has been found to be 5 microg/L of Se. The detection limit using HPLC-"on line" focused microwave digestion-HG-AAS has been found to be 1 microg/L of Se, with a precision (repeatability) better than +/- 5%. The latter proved to be an exceptional on-line real-time chromatographic detector for selenium speciation purposes.     

Constituents of labiatae—XIV: Vierol and powerol,two new diterpenes from Sideritis canariensis

The two new diterpenes, vierol (1) [(?)kaurane-16α,18-diol] and powerol (3) [(?)kaurane-7β,16α-diol] have been isolated from Sideritis canariensis Ait. 1 was obtained by partial synthesis from epicandicandiol (7), and 3 was related with (?)kauranol (6) and (?)kauren-7β-ol acetate (11). Reduction of the acetoxy-aldehyde 14 by the method of Huang-Minlon and posterior acetylation gave 11, (?)isokauren-7β-ol acetate (17) and (?)kauran-7β-ol acetate (18).     

Thermal behaviour of benzenesulfenamides and of their chromium carbonyl complexes

Benzenesulfenamides with the formula R-S-N-(R)₂ (R=C₆H₅ andR=NC₄H₈O, C₇H₇ and C₆H₁₁) and their chromium carbonyl complexes were studied by means of TG and mass spectrometric methods. The thermal behaviour of the compounds the stabilities of free sulfenamides are lower than those observed for the corresponding chromium carbonyl complexes. Combined thermogravimetry — mass spectrometry results suggest that the fragmentation mechanism of the carbonyl complexes involves cleavage of the Cr-S and Cr-CO bonds while that of sulfenamide depends mainly on the dissociation rates of the NR₂ groups.This work was partially supported by the Departamento técnico de Investigation of the Universidad de Chile, Grant Q3280/9324.     

Static and dynamic light-scattering studies on micellar solutions of alkyldimethylbenzylammonium chlorides

Static (SLS) and dynamic (DLS) light-scattering techniques were applied to the study of the aggregation of dodecyl- (C12DBACl), tetradecyl- (C14DBACl), and hexadecyldimethylbenzylammonium (C16DBACl) chlorides in water and in 0.01 and 0.05 m NaCl aqueous solutions at 25 degrees C. Results of SLS measurements yielded critical micelle concentration (cmc) values for aqueous and NaCl solutions. The aggregation numbers of the micelles for the homologous surfactants are low but increase with chain length and ionic strength of the solution. Various patterns of changes of the diffusion coefficient, D, as a function of chain length, molality, and with ionic strength were found for the studied surfactants. Transformations in the structure of micelles of C14DBACl in 0.01 m NaCl occur at a concentration of surfactant of about 0.01 m. Such transformations, presumably due to rodlike structure, are the more extensive the higher the concentration of NaCl. The concentration of C16DBACl in 0.05 m NaCl covers the range where already repulsive interactions between micelles occur, as judged by the strongly negative slope of the D versus molality plot. To provide additional information on the suggested transformations, complementary viscosity measurements for C14DBACl in 0.01 m of NaCl have been performed.     

Interpreting the gas chromatographic retention of n-alkanes

Non-linear regressions were applied to n-alkanes retention data for the determination of gas hold-up in a preceding paper. It was found that at temperatures over 100 degrees C the reduced partial molar free energy of solution, deltaG/RT, tends to be negligible for the solute methane in poly(dimethylsiloxane) stationary phases. A consequence of interest can be inferred from this fact. The C-H bonds from terminal methyl groups of n-alkane solute molecules should not contribute significantly to deltaG/RT in these conditions. The analysis of data confirms that, within the chromatographic experimental error, the contributions of n-alkane end C-H bonds are also negligible in this temperature range. Consequently, the regression parameter that contains the phase ratio of the column only includes the gas hold-up as the accompanying factor.     

On the electrophoretic mobility and zeta potential of montmorillonite in non-aqueous media

Experimental results on the electrophoretic velocity and mobility of Ca-montmorillonite in 2-propanol are reported. The variation of the electrophoretic velocity with the externally applied electric field and the particle size range, at constant volume fraction and temperature, is considered. Given the difficulties for determining the types and concentrations of ions present in these liquid media, two methods are discussed for the estimation of the double layer thickness and hence the product, necessary for the determination of the zeta potential () of the interface. Although both methods of calculation yield different values of, the results for the zeta potential are very similar in the regions of and characteristic of our systems. The application to the experimental data of three theoretical relations between electrophoretic mobility and zeta potential is also discussed.