Oxygen consumption and chemisorption in low-temperature oxidation of sub-bituminous pulverized coal

Studying the effect of oxygen in coal oxidation is very important for understanding and controlling coal spontaneous combustion. However, the oxygen effect is not very easy to determine clearly due to the large effect of heat source on coal oxidation in temperature rising experiments. Here, focused on sub-bituminous coal, the oxygen effect was separated from coal oxidation by continuously measuring FTIR spectra of coal with respect to varying temperatures and under oxygen and nitrogen. The active groups’ real-time changes of coal oxidation, thermal treatment and oxygen effect were measured. The carboxylic ester and carboxyl units are the main functional groups that increase with temperatures increasing under oxygen and nitrogen, while the other functional groups decrease in quantity. The oxygen effect promoted the consumption of aliphatic hydrocarbons and hydroxyl groups and also promoted the formation of oxygen-containing groups (except hydroxyl). Four characteristic temperature stages involved in the oxygen effect and their key functional groups were identified. Simultaneously, the relationship of oxygen consumption and chemisorption in oxygen effect was analyzed. The starting temperature of oxygen chemisorption is between 50 and 60°C. The maximum contribution of oxygen effect was observed in methyl and methylene groups. These results are important for chemical control of coal spontaneous combustion. The oxidation of aliphatic hydrocarbon should be controlled before oxygen chemisorption. The value of oxygen consumption between 70 and 80°C can be measured accurately due to the constant chemisorption rate, which help to identify the tendency for spontaneous combustion. These results will help in better understanding of the reaction mechanism of coal oxidation, especially the oxygen effect.     

SELECTIVE S-ALKYLATION IN PHASE TRANSFER CATALYSIS OF 2-PYRIDINE-, -PYRIMIDINE- AND BENZOXAZOLE-THIONE

Abstract

Alkylation via phase transfer catalysis of several ambident anions of the |N–C–S|^? type leads exclusively to S-substitution. Yields obtained are better or equal to those given by conventional methods and experimental work-up is very much simplified compared to the latter.     

First‐Principles Investigation of Anisotropic Electron and Hole Mobility in Heterocyclic Oligomer Crystals

Based on quantum chemistry calculations combined with the Marcus–Hush electron transfer theory, we investigated the charge‐transport properties of oligothiophenes (nTs) and oligopyrroles (nPs) (n=6, 7, 8) as potential p‐ or n‐type organic semiconductor materials. The results of our calculations indicate that 1) the nPs show intrinsic hole mobilities as high as or even higher than those of nTs, and 2) the vertical ionization potentials (VIPs) of the nPs are about 0.6–0.7 eV smaller than the corresponding VIPs of the nTs. Based on their charge‐transport ability and hole‐injection efficiency, the nPs have potential as p‐type organic semiconducting materials. Furthermore, it was also found that the maximum values of the electron‐transfer mobility for the nTs are larger by one‐to‐two orders of magnitude than the corresponding maximum values of hole‐transfer mobility, which suggests that the nTs have the potential to be developed as promising n‐type organic semiconducting materials owing to their electron mobility.     

General Route to Synthesize Monodisperse Oxide (Hydroxide) Nanoparticles

Mono-dispersed oxide and hydroxide nanoparticles have been synthesized through the solvothermal process in alcohol-water mixtures. The products were characterized by powder x-ray diffraction (XRD) and scanning electron microscopy (SEM). Plate-like nanoparticles are obtained for Bi₂O_2.33, Fe₂O₃, and Cd(OH)₂, and spherical nanoparticles are obtained for SnO₂. The growth mechanism for the mono-dispersed nanoparticles has been preliminarily discussed.     

The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Determination of trace amounts of chromium (VI) by flow injection analysis with chemiluminescence detection

A new sensitive chemiluminescence (CL) method combined with continuous flow injection analysis is described for the determination of Cr(VI). Strong CL signals were generated by Cr(VI)-catalysed oxidation of gallic acid in the presence of potassium permanganate and hydrogen peroxide. Effects of reagent concentrations, temperature, pH, flow rates, mixing coil length and mixing flow sequences on the chemiluminescence intensity were studied. Under the optimised experimental conditions, the relationship between the logarithm of concentration (log?C) of Cr(VI) and the logarithm of intensity (log?I) is linear over the range of 2?×?10^?11 – 5?×?10^?4?mol?L^?1, with the detection limit (3σ) of 4?×?10^?12?mol?L^?1. Relative standard deviation of ten measurements of 1?×?10^?9?mol?L^?1 Cr(VI) is 1.7%. This flow injection analysis (FIA) system proved to be able to analyse up to 40 samples h^?1. Effects of various interferences possibly present in the water samples were investigated. Most cations and anions, as well as organic compounds, did not interfere with the determination of Cr(VI) in water samples. The experimental results obtained for chromium in reference materials were also in good agreement with the certified values.     

叶绿素降解产物的环丙基化及其二氢卟吩衍生物的合成

以叶绿素降解产物脱镁叶绿酸-a甲酯为起始原料,利用其二氢卟吩大环上的活性反应区域,沿着N21-N23轴向进行官能团修饰,通过1,3-偶极环加成反应、Grignard反应和外接环的结构改造,在周环上的不同位置上引进了三元环烷基结构,完成了一系列未见报道的叶绿素类二氢卟吩衍生物的合成,其化学结构均经UV,IR,1H NMR,MS及元素分析予以证实,同时也讨论了环丙基的引进对二氢卟吩的理化性质所产生的各种影响,并对部分新化合物的体外光动力活性进行了测试.     

Promotion Effect of Gold on Mo/ZSM-5 Catalyst for the Catalytic Cracking of Light Diesel Oil to Increase Propylene Production

Kinetics and Catalysis - Using a modified deposition-precipitation method, a series of Au–Mo/ZSM-5 catalysts with different Au loadings were prepared. The XRD, nitrogen adsorption-desorption,...     

Comparative Analysis of Chemical Constituents in Different Parts of Lotus by UPLC and QToF-MS

Six parts of lotus (seeds, leaves, plumule, stamens, receptacles and rhizome nodes) are herbal medicines that are listed in the Chinese Pharmacopoeia. Their indications and functions have been confirmed by a long history of clinical practice. To fully understand the material basis of clinical applications, UPLC-QToF-MS combined with the UNIFI platform and multivariate statistical analysis was used in this study. As a result, a total of 171 compounds were detected and characterized from the six parts, and 23 robust biomarkers were discovered. The method can be used as a standard protocol for the direct identification and prediction of the six parts of lotus. Meanwhile, these discoveries are valuable for improving the quality control method of herbal medicines. Most importantly, this was the first time that alkaloids were detected in the stamen, and terpenoids were detected in the cored seed. The stamen is a noteworthy part because it contains the greatest diversity of flavonoids and terpenoids, but research on the stamen is rather limited.