Sol-gel Synthesis and Electrochemical Performance of Li4-xMgxTi5-xZrxO12 Anode Material for Lithium-ion Batteries

The anode materials Li_4?xMg_xTi_5?xZr_xO₁₂ (x=0, 0.05, 0.1) were successfully synthesized by sol‐gel method using Ti(OC₄H₉)₄, CH₃COOLi·2H₂O, MgCl₂·6H₂O and Zr(NO₃)₃·6H₂O as raw materials. The crystalline structure, morphology and electrochemical properties of the as‐prepared materials were characterized by XRD, SEM, cyclic voltammograms (CV), electrochemical impedance spectroscopy (EIS) and charge‐discharge cycling tests. The results show that the lattice parameters of the Mg‐Zr doped samples are slightly larger than that of the pure Li₄Ti₅O₁₂, and Mg‐Zr doping does not change the basic Li₄Ti₅O₁₂ structure. The rate capability of Li_4?xMg_xTi_5?xZr_xO₁₂ (x=0.05, 0.1) electrodes is significantly improved due to the expansile Li⁺ diffusion channel and reduced charge transfer resistance. In this study, Li_3.95Mg_0.05Ti_4.95Zr_0.05O₁₂ represented a relatively good rate capability and cycling stability, after 400 cycles at 10 C, the discharge capacity retained as 134.74 mAh·g^?1 with capacity retention close to 100%. The excellent rate capability and good cycling performance make Li_3.95Mg_0.05Ti_4.95Zr_0.05O₁₂ a promising anode material in lithium‐ion batteries.     

General Route to Synthesize Monodisperse Oxide (Hydroxide) Nanoparticles

Mono-dispersed oxide and hydroxide nanoparticles have been synthesized through the solvothermal process in alcohol-water mixtures. The products were characterized by powder x-ray diffraction (XRD) and scanning electron microscopy (SEM). Plate-like nanoparticles are obtained for Bi₂O_2.33, Fe₂O₃, and Cd(OH)₂, and spherical nanoparticles are obtained for SnO₂. The growth mechanism for the mono-dispersed nanoparticles has been preliminarily discussed.     

叶绿素降解产物的环丙基化及其二氢卟吩衍生物的合成

以叶绿素降解产物脱镁叶绿酸-a甲酯为起始原料,利用其二氢卟吩大环上的活性反应区域,沿着N21-N23轴向进行官能团修饰,通过1,3-偶极环加成反应、Grignard反应和外接环的结构改造,在周环上的不同位置上引进了三元环烷基结构,完成了一系列未见报道的叶绿素类二氢卟吩衍生物的合成,其化学结构均经UV,IR,1H NMR,MS及元素分析予以证实,同时也讨论了环丙基的引进对二氢卟吩的理化性质所产生的各种影响,并对部分新化合物的体外光动力活性进行了测试.     

Promotion Effect of Gold on Mo/ZSM-5 Catalyst for the Catalytic Cracking of Light Diesel Oil to Increase Propylene Production

Kinetics and Catalysis - Using a modified deposition-precipitation method, a series of Au–Mo/ZSM-5 catalysts with different Au loadings were prepared. The XRD, nitrogen adsorption-desorption,...     

Single-Atom Iron Catalysts on Overhang-Eave Carbon Cages for High-Performance Oxygen Reduction Reaction

Single-atom catalysts have drawn great attention, especially in electrocatalysis. However, most of previous works focus on the enhanced catalytic properties via improving metal loading. Engineering morphologies of catalysts to facilitate mass transport through catalyst layers, thus increasing the utilization of each active site, is regarded as an appealing way for enhanced performance. Herein, we design an overhang-eave structure decorated with isolated single-atom iron sites via a silica-mediated MOF-templated approach for oxygen reduction reaction (ORR) catalysis. This catalyst demonstrates superior ORR performance in both alkaline and acidic electrolytes, comparable to the state-of-the-art Pt/C catalyst and superior to most precious-metal-free catalysts reported to date. This activity originates from its edge-rich structure, having more three-phase boundaries with enhanced mass transport of reactants to accessible single-atom iron sites (increasing the utilization of active sites), which verifies the practicability of such a synthetic approach.     

双染料敏化光致聚合物的光化动力学研究

研究了光致聚合物的光化学反应理论模型及其动力学参量。合成了染料藻红B和亚甲基蓝作为联合光敏剂共同敏化的全息光存储光致聚合物材料。对材料测试分别得到在曝光波长为633 nm与曝光强度为65 mW/cm2时,透射率随曝光条件的变化关系以及材料各光化学参量。结果表明,随着曝光波长与曝光强度的增加,光致聚合物的光化漂白速率常数k与量子产率Φ增大,当曝光强度为65 mW/cm2时透射率在短波长下出现了下降,光化漂白速率常数k出现负值,而摩尔吸收系数ε在条件不同时则表现了不同的变化趋势。     

一个二进小波变换像空间的再生核函数

1 引言 小波分析是结合泛函分析、应用数学、逼近论、调和分析、广义函数论等数学知识的结晶,具有深刻的理论意义和广泛的应用范围,被称为”数学显微镜”.基于其多分辨分析的特点以及在时、频两域都具有表征信号局部特征的功能,应用它可以解决许多Fourier变换不能解决的难题,为工程应用提供了一种新的、更有效的分析工具[1],由...     

可再生能源系统的不确定性优化模型及求解

结合新提出的满意度方法和混合整数规划方法,给出了多态不确定性环境下可再生能源规划模型.该模型综合描述了多地区、多时期、多品种、多部门之间的可再生能源管理系统的复杂性、系统性、动态性和不确定性.最后的实例求解结果说明该模型能很好地反映能源安全性、系统可靠性与系统成本之间的关系,并能给出不同系统违反水平下的能源配置方式及增容计划,为决策者提供决策参考.