Synthesis,Structures, and Fluorescent Properties of Three Cobalt‐Based Coordination Polymers with a Rigid Tripodal Carboxylate Ligand

Three cobalt(II) coordination polymers, [Co₂(tatb)₂(2,2′‐bipy)₂ (H₂O)₂ · DMA · 2H₂O] ( 1 ), [Co₂(tatb)₂(1,10‐phen)₂(H₂O)₂ · 2H₂O] ( 2 ) and [Co(tatb)(1,3‐dpp) · H₂O] ( 3 ) (H₃tatb = 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid; 2,2′‐bipy = 2,2′‐bipyridyl; 1,10‐phen = 1,10‐phenanthroline; 1,3‐dpp = 1,3‐bis(pyridin‐4‐yl)propane), were synthesized solvothermally and characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as IR spectroscopy. Complexes 1 and 2 exhibit 1D double‐chain structures, which further connect into interesting 3D networks by hydrogen bond and strong π–π interactions. Complex 3 possesses 2D 4⁴‐sql topology, which is packed parallel in an AA fashion. Moreover, thermal stability properties and photoluminescence properties of 1 , 2 and 3 were also investigated.     

电化学溶解金属铜制备纳米CuO

有机电解合成;铜电极;水解;电化学溶解金属铜制备纳米CuO     

N-取代环十二酮缩氨基硫脲的氧化环合反应

以环十二酮为起始物合成的一系列N-取代环十二酮缩氨基硫脲(Ⅰ)经二氧化锰氧化环合为2-(1,11-十一亚甲基)-5-取代亚氨基-△^3-1,3,4-噻二唑啉(Ⅱ)。Ⅱ的结构得到IR,13^CNMR和元素分析的确证。反应中同时分离到一个副产物,经IR,13^CNMR,EIMS和元素分析确定其结构为2-(1,11-十一亚甲基)-5-亚氨基△^3-1,3,4-噻二唑啉(Ⅲ)。据此提出了Ⅰ经二氧化锰氧化环合为Ⅱ的两步反应机制,此机制可以合理地解释Ⅱ和Ⅲ的生成。     

超疏水多孔阵列碳纳米管薄膜

碳纳米管由于具有特异的力学[1] 、光学[2 ] 、电学[3,4 ] 和磁学性质[5] ,使其在锂离子电池[6 ] 和平板展示器[7] 等方面呈现出广泛的应用前景 .Ebbesen等[8] 对无序碳纳米管材料的浸润性进行了详细研究 ,发现其很容易被水润湿 .然而 ,阵列碳纳米管膜的浸润性研究尚未见报道 .固体表面的浸润性主要由表面化学组分和几何结构两方面控制 .通常 ,加大表面粗糙度可以增强其浸润性 [9～ 16 ] .近来 ,超疏水表面 (即与水的接触角大于 1 5 0°的表面 )的研究显示了广泛的应用背景[13～ 16 ] .这种表面通常可由增加表面粗糙度和降低表面能来制备[1…     

Effect of CeO2 preparation method and Cu loading on CuO/CeO2 catalysts for methane combustion

CeO2 was synthesized by sol-gel, hydrothermal, nitrate thermal decomposition methods, respectively, and used as support to prepare CuO/CeO2 catalysts. According to characterization and reaction results, preparation method of CeO2 had a great influence on the physicochemical properties and activities of CuO/CeO2 catalysts. CuO with high dispersion and strong interaction with CeO2 was highly active in methane combustion, while CuO particles less associated with CeO2 showed less activity. The CuO catalyst supported on CeO2 which was prepared via nitrate thermal decomposition method showed the largest area, the smallest particle size, the highest dispersion of copper species and strong support metal interactions. Therefore, it presented the highest redox ability and activity for methane combustion. Activities of the catalysts with different copper content kept increasing until 5% Cu loading and from then on kept constant. Moreover, methane conversion decreased as methane space velocities increased on CuO/CeO2 catalyst. Addition of CO2 to the feed did not produce a significant effect on the catalytic activity, but the presence of H2O provoked a remarkable decrease on the activity of CuO/CeO2 catalyst.     

Effect of water on the performance of Pd-ZSM-5 catalysts for the combustion of methane

Palladium-based catalysts were prepared using impregnation （I） and ion-exchange method （E） with ZSM-5 as support. Pd-ZSM-5（I） and Pd-ZSM-5（E） catalysts presented the high activity for the combustion of methane. The order of activity was consistent with Brcnsted acidity of the catalysts： Pd-ZSM-5（I）〉Pd-ZSM-5（E）. It was shown by FT-IR that methane was adsorbed on the acidic bridging hydroxyl groups of ZSM-5-supported Pd catalysts. The effect of water on the activity of Pd-ZSM-5 was investigated. The inhibition effect of water on the conversion of methane was observed. However, water promoted the stability of Pd-ZSM-5 obviously during extended time periods. XPS measurement showed that Pd/Si ratio near the surface of Pd-ZSM-5（E） decreased more pronouncedly with time in dry stream than that of Pd-ZSM-5（I）, this is attributed to the dispersion of Pd into the micropores. The addition of water, however, retarded Pd dispersion. And high partial pressure of methane reduced this effect of water vapor. The decrease in activity during the stability test can be explained on the basis of the reduction of Pd/Si ratio.     

Faster Sickling Kinetics and Sickle Cell Shape Evolution during Repeated Deoxygenation and Oxygenation Cycles

Experimental Mechanics - Kinetics of cell sickling and morphological change have been recognized as important parameters that are correlated closely with altered blood rheology and vasoocclusion in...     

剩余格与正则剩余格的特征定理

本文进一步研究了具有广泛应用的一类模糊逻辑代数系统——剩余格，并引入了正则剩余格的概念，对剩余格与正则剩余格的定义进行了讨论，给出了剩余格与正则剩余格的特征定理，其中包含剩余格与正则剩余格的等式特征，从而这两个格类都构成簇．本文还讨论了剩余格与正则剩余格公理系统的独立性，以及它们与相近代数结构的关系．     

高能核碰撞中带电多重数快度与能量和中心度的关系

用强子–弦级联模型JPCIAE及相应的Monte Carlo事例产生器研究相对论性核–核碰撞中带电粒子多重数的赝快度密度对能量和中心度的依赖关系.无需另调任何模型参数的条件下,此模型可以同时较好地描述相对论性pp实验数据及PHOBOS和PHENIX实验组的Au+Au实验数据.本文指出:因〈N_part〉并非严格定义的物理量,致使实验上和理论上确定〈N_part〉有一定任意性,从而使得每参加者核子对的带电粒子赝快度密度随着〈N_part〉的增加可能逐渐增大,也可能逐渐减小,因此用它来区分粒子产生机制是欠妥的.     

High yielding microwave-assisted synthesis of tri-substituted 1,3,5-triazines using Pd-catalyzed aryl and heteroarylamination

A rapid and efficient Pd-catalyzed aryl and heteroarylamination under microwave irradiation has been developed for various tri-substituted triazines that can serve as versatile building blocks for both supramolecular and medicinal chemistry research. Particularly valuable features of this method included the short reaction time, good yield, and convenient operation.