Three-dimensionally ordered macroporous metal oxide–silica composite for removal of mercaptan

A series of 3DOM and non-3DOM metal oxide–silica composites were prepared and tested dynamically in a packed-bed reactor at room temperature to remove ethanethiol from a gas stream containing ethyl mercaptan in moist N_2.The obtained sorbents were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption techniques. The experimental results showed that the adsorption ability of different kinds of metal oxide–silica composites with 3DOM structure decreased in the sequence: 3D-CuO/SiO₂ > 3D-NiO/SiO₂ > 3D-Co₃O₄/SiO₂ > 3D-ZnO/SiO₂. The best ratio of CuO to SiO₂ of 3DOM copper–silicon oxide sorbents for ethanethiol removal was found to be 1:2. The 3DOM structure could improve the removal activity of sorbents remarkably because of the high porosity with ordered interconnected macropores as well as the large surface area and high dispersion of CuO. It was also found that a moist atmosphere greatly benefited the adsorption of ethanethiol at ambient condition.     

Effect of addition of 1-butyl-3-methylimidazolium thiocyanate on conductivity of Na-containing polymer electrolyte

Research in the environmentally friendly energy field has grown rapidly due to severe problems such as global warming and climate change. Sodium-ion technology is one of the most promising alternatives to lithium-ion batteries. Use of ionic liquids containing thiocyanate anion has been considered because of their low cost, low viscosity, and nonhazardous nature. In this work, polyethylene oxide (PEO)–sodium perchlorate (NaClO₄) samples containing different amounts of 1-butyl-3-methylimidazolium thiocyanate ionic liquid were prepared by a solution casting method. Addition of the ionic liquid to the PEO–NaClO₄ electrolyte further increased the ionic conductivity. The electrolyte containing 30 wt% ionic liquid exhibited the maximum ionic conductivity of ~5.0 × 10^?4 S/cm at room temperature. Fourier-transform infrared (FT-IR) spectroscopy revealed the interaction between the polymer chain and salt ion complexes for various sodium salt contents. Differential scanning calorimetry (DSC) demonstrated that the crystallinity was reduced by addition of 1-butyl-3-methylimidazolium thiocyanate ionic liquid.     

Physicochemical studies on bioactive Cr(III) coordination compounds with esters of hydrazine carboxylic acid as hetero donor ligands

Reaction between hydrazine derivative ligands (HrzE) or (HrzB) and chromium salt in 1:2 (metal:ligand) molar ratio yielded monometallic trivalent coordination compounds with general formula [Cr(HrzE)₂X₂]X and [Cr(HrzB)₂X₂]X, where (HrzE) = hydrazine carboxylic acid ethyl ester, (HrzB) = hydrazine carboxylic acid tert-butyl ester, and X = Cl^?, Br^? or F^?. Elemental analysis, conductivity measurements, magnetic moment measurements, and various spectroscopic techniques, viz. infrared, ultraviolet–visible, and electrospray ionization mass spectrometry, were applied to illustrate the structure and composition of the coordination compounds. Analytic and conductivity results were consistent with 1:1 electrolytic behavior and the proposed formulas of the coordination compounds. Electronic absorption data and magnetic moment parameters indicated octahedral geometry surrounding the metal ion in the coordination compounds. The in vitro antimicrobial behavior of the ligands and coordination compounds was screened using four bacterial strains (Staphylococcus aureus, Bacillus subtilis, Escherichia coli, and Salmonella typhi) and two fungal strains (Candida parapsilosis and Saccharomyces cerevisiae). The results indicated improved activity of the coordination compounds compared with the free ligands against the studied bacteria and fungi.     

Effects of precipitants and surfactants on catalytic activity of Pd/CeO<Subscript>2</Subscript> for CO oxidation

A series of precipitants and commercial surfactants (soft templates) were employed to synthesize mesoporous/nano CeO₂ by a hydrothermal method. As-prepared CeO₂ was impregnated with palladium and employed for low-temperature catalytic oxidation of CO. It was found that both soft templates and precipitants had significant effects on the morphology, particle size, crystallinity, and porous structure of the CeO₂, having a significant effect on the surface palladium abundance, molar ratios of surface species, and catalytic activity of the final impregnated Pd/CeO₂. Using ammonia as precipitant could facilitate increased surface palladium abundance and surface molar ratios of PdO/Pd _SMSI , Ce³⁺/(Ce³⁺ + Ce⁴⁺), and O_surface/O_lattice. The catalytic activity of the final Pd/CeO₂ catalysts could be enhanced as well. The optimal P123-assisted ammonia-precipitated Pd/CeO₂ catalyst exhibited over 99% catalytic conversion of CO at 50 °C.     

Facile synthesis of some condensed 1,3-thiazines and thiazoles under conventional conditions: antitumor activity

1,3-Thiazine 3 was obtained from cinnamoyl thiourea derivative 2 as the kinetic control product. Refluxing of 2 with sodium ethoxide afforded pyrimidine derivative 4. Moreover, stirring of 2 with bromine/acetic acid gave thiazole 5 that was condensed with o-phenylene diamine forming benzimidazole 6. Heating of arylthiourea 8 with maleic anhydride or phenacyl chloride afforded thiazole derivatives 9 and 10, respectively. Condensation of compound 10 with o-phenylene diamine gave benzimidazole 11. Reaction of p-amino benzoic acid with chloro acetyl isothiocyanate, acetylacetone and ethylacetoacetate produced imidazole 14, enaminone 15 and crotonate 16 derivatives, respectively. Stirring a mixture of benzoyl isothiocyanate with 15 and/or 16 resulted in pyridine-2-thione 17. The yields of the prepared compounds were 41–93%. The experimental section is simple and easy. The detailed synthesis, spectroscopic data, IC₅₀ and antitumor activity of the synthesized compounds were reported. The cytotoxicity of the newly synthesized products showed that compound 4 is the most active compound towards the cancer cell line at which its reactivity is higher than that of the standard doxorubicin (anticancer reference drug).     

Synthesis of TiO<Subscript>2</Subscript> nanotubes using different alkaline media and their applications in photocatalysis and DSSCs

TiO₂ nanotubes (TNTs) were successfully synthesized from different alkaline media (i.e., NaOH and KOH) by using a microwave hydrothermal process. The effects of different alkaline media on the formation of TiO₂ nanotubes and their physicochemical properties were investigated. The phases of different TiO₂ nanostructures were studied by using X-ray diffraction patterns. Morphologies of the nanostructures were observed with a transmission electron microscope. The optical properties of the nanostructures were evaluated through the absorption behavior using UV–Vis diffuse reflectance spectroscopy. The photocatalytic activities of the TiO₂ nanostructures were evaluated by the degradation of methylene blue aqueous dye solution under the simulated solar light irradiation. Similarly, the photovoltaic efficiencies of the prepared samples were investigated by making photo-anode layers in the Dye Sensitized Solar Cells (DSSCs). The results revealed that in comparison to the single layered TiO₂ nanostructures in the DSSC, creation of a double layer structure significantly enhanced the efficiency of DSSC.     

Novel ferrocene-based ionic liquid supported on silica nanoparticles as efficient catalyst for synthesis of naphthopyran derivatives

We report synthesis of silica nanospheres containing ferrocene-tagged imidazolium acetate (SiO₂@Im-Fc[OAc]) as efficient heterogeneous nanocatalyst for synthesis of naphthopyran derivatives under solvent-free conditions, based on modification of nano SiO₂ by ionic liquid with ferrocene tags and subsequent anion metathesis reaction. The synthesized novel nanocatalyst (SiO₂@Im-Fc[OAc]) was systematically characterized using Fourier-transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction analysis, and field-emission scanning electron microscopy. The catalytic activity of (SiO₂@Im-Fc[OAc]) was tested in one-pot three-component reaction of aromatic aldehydes, malononitrile, and 2-naphthol for facile synthesis of naphthopyran derivatives. To achieve high catalytic efficacy, the effects of various reaction parameters such as temperature, amount of catalyst, type of solvent, etc. were investigated. Furthermore, recovery and reuse of the nanocatalyst several times was demonstrated without appreciable loss in catalytic activity. The presented protocol offers several advantages, including green and ecofriendly nature, operational simplicity, higher yield, and easy recovery and reuse of the nanostructured catalyst. The workup of these very clean reactions involves only recrystallization of the product from ethanol and recovery of the catalyst by filtration.     

Structures and mechanisms in chemical reactions: George A. Olah’s life-long search of chemistry

The Hungarian-born American chemistry Nobel laureate George A. Olah used superacids to give longer life to carbocations. He resolved a long-standing debate on reaction mechanism in organic chemistry and, more importantly, opened new vistas in hydrocarbon chemistry to produce hosts of new compounds. The concerted utilization of organic synthesis, physical techniques, and computational methods led to spectacular achievements in hydrocarbon chemistry. Olah has always been on the lookout for the practical applications of his discoveries in fundamental chemistry. He continued his research after his Nobel award and has worked out the idea, which he labeled “the methanol economy.” Olah’s example shows that a great researcher can also be a devoted and caring human being.