Antiviral agents of plant origin. III. Scopadulin, a novel tetracyclic diterpene from Scoparia dulcis L

The structure and stereochemistry of scopadulin, a novel aphidicolane-type diterpene isolated from Scoparia dulcis L. have been established from spectral data and single-crystal X-ray analysis of its acetone solvate.     

Radiation effects in the transient hot-wire technique

The transient hot-wire technique is widely used for absolute measurements of the thermal conductivity and thermal diffusivity of fluids. It is well established that fluid radiation effects significantly influence these measurements, especially those for the thermal diffusivity. Corrections for radiation effects are based on the models developed and deviations of the measured data from the ideal line source model. In this paper, the effect of fluid radiation on the measurements of the thermal conductivity of n-pentane is presented. For comparison, the influence of thermal radiation effect on measurement of transparent fluids, such as argon is also shown. The difference between the influence of natural convection and thermal radiation is also demonstrated.     

Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

Stamp collapse in soft lithography

We have studied the so-called roof collapse in soft lithography. Roof collapse is due to the adhesion between the PDMS stamp and substrate, and it may affect the quality of soft lithography. Our analysis accounts for the interactions of multiple punches and the effect of elastic mismatch between the PDMS stamp and substrate. A scaling law among the stamp modulus, punch height and spacing, and work of adhesion between the stamp and substrate is established. Such a scaling law leads to a simple criterion against the unwanted roof collapse. The present study agrees well with the experimental data.     

Characterization of the Phosphoryl-Nitrogen Linkages in Histone H4

In earlier work we nave described and partially characterized two histone kinases from regenerating rat liver and other tissues which catalyze the transfer of the γ-phosphoryl group from ATP to histones. The histone phosphates thus formed were observed to be acid-labile and base-stable. In the present study we report on the specificity of one of these enzymes, namely, the kinase which is optimally active at pH 9. This enzyme appears to be relatively specific for the two histidine residues of histone H4. These histidines occur at positions 18 and 75, and both are phosphorylated. However, when regenerating rat liver was the source of enzyme, the product was 1-phosphohistidine, whereas the enzyme from Walker-256 carcinosarcoma catalyzed the formation of 3-phosphohistidine.     

Etude cristallographique de l'arsénotellurure de zirconium quadratique

Single crystals of zirconium arsenotelluride (PbFCl type) have been prepared by direct synthesis from the elements. Chemical analysis gives: $\text{As}\text{Zr}\text{= 1.43 ± 0.02}$ and $\text{Te}\text{Zr}\text{= 0.46 ± 0.01}$, in atoms. Lattice constants are: a = 3.82 ± 0.01 Å and c = 8.17 ± 0.02Å. Experimental density is equal to 7.14 ± 0.05. Unit cell thus contains Zr_2.00As_2.86Te_0.92. The structure has been solved with 227 reflections of a single crystal recorded at room temperature. The final R factor is 0.081, excluding zero reflections. Part of the arsenic atoms fills a site and the remainder is located in a second site, the occupation of which is completed by a part of zirconium atoms. The third site is occupied, but not filled, by the tellurium atoms and the remainder of zirconium atoms.     

Palladium-catalyzed regioselective arylation of imidazo[1,2-a]pyrimidine

Imidazo[1,2-a]pyrimidine can be arylated at the 3-position with aryl bromides in the presence of base and a catalytic amount of palladium. This provides an efficient one-step synthesis of 3-arylimidazo[1,2-a]pyrimidines from the unsubstituted heterocycle. [reaction: see text]     

Half-sandwich titanium(IV) complexes with Kläui's tripod ligand

Treatment of [Ti(O-i-Pr)(2)Cl(2)] with NaL(OEt) (L(OEt)(-) = [CpCo[P(O)(OEt)(2)](3)](-), Cp = eta(5)-C(5)H(5)) afforded [L(OEt)Ti(O-i-Pr)(2)Cl] that reacted with HCl in ether to give [L(OEt)TiCl(3)] (1). The average Ti-O and Ti-Cl distances in 1 are 1.975 and 2.293 A, respectively. Reaction of titanyl sulfate with NaL(OEt) in water followed by addition of HBF(4) afforded [L(OEt)TiF(3)] (2), the Ti-O and Ti-F distances of which are 2.020(2) and 1.792(2) A, respectively. The Zr(IV) analogue [L(OEt)ZrF(3)] (3) was prepared similarly from zirconyl nitrate, NaL(Oet), and HBF(4) in water. The Zr-O and average Zr-F distances in 3 are 2.139(2) and 1.938(2) A, respectively. Treatment of 1 with tetrachlorocatechol (H(2)Cl(4)cat) afforded [L(OEt)Ti(Cl(4)cat)Cl] (4). The average Ti-O(P), Ti-O(C), and Ti-Cl distances in 4 are 1.972, 1.926, and 2.334 A, respectively. Hydrolysis of 4 in the presence of Et(3)N yielded the mu-oxo dimer [(L(OEt))(2)Ti(2)(Cl(4)cat)(2)(mu-O)] (5). The average Ti-O(P), Ti-O(C), and Ti-O(Ti) distances in 5 are 2.027, 1.926, and 1.7977(9) A. Treatment of 1 with 1,1'-binaphthol (BINOLH(2)) in the presence of Et(3)N afforded [(L(OEt))(2)Ti(2)(mu-O)(2)(mu-BINOL)] x 2BINOLH(2) (6.2BINOLH(2)). Complex 1 is capable of catalyzing ring opening of epoxides with Me(3)SiN(3) under solvent-free conditions presumably via a Ti-azide intermediate.     

Solid- and solution-phase synthesis of vancomycin and vancomycin analogues with activity against vancomycin-resistant bacteria

Vancomycin, the prototypical member of the glycopeptide family of antibiotics, is a clinically used antibiotic employed against a variety of drug-resistant bacterial strains including methicillin-resistant Staphylococcus aureus (MRSA). The recent emergence of vancomycin resistance, viewed as a growing threat to public health, prompted us to initiate a program aimed at restoring the potency of this important antibiotic through chemical manipulation of the vancomycin structure. Herein, we describe the development of synthetic technology based on the design of a novel selenium safety catch linker, application of this technology to a solid-phase semisynthesis of vancomycin, and the solid- and solution-phase synthesis of vancomycin libraries. Biological evaluation of these compound libraries led to the identification of a number of in vitro highly potent antibacterial agents effective against vancomycin-resistant bacteria. In addition to aiding these investigations, the solid-phase chemistry described herein is expected to enhance the power of combinatorial chemistry and facilitate chemical biology and medicinal chemistry studies.     

Stable isotope dilution mass spectrometry for the simultaneous determination of cortisol, cortisone, prednisolone and prednisone in plasma.

A capillary gas chromatographic-mass spectrometric method for the simultaneous determination of cortisol, cortisone, prednisolone and prednisone in human plasma is described. [1,1,19,19,19-2H5]Cortisol, [1,1,19,19,19-2H5]cortisone, [1,19,19,19-2H4]prednisolone and [1,19,19,19-2H4]prednisone were used as internal standards. Formation of the bismethylenedioxy-3-heptafluoro-n-butyryl (BMD-HFB) derivatives made possible the separation of the four corticosteroids with good gas chromatographic behaviour. The new double derivatization has been demonstrated to be of value for sensitive and selective quantification by this technique. Detection was performed by monitoring the molecular ion (M+) of the BMD-HFB derivatives for cortisone and prednisolone, the [M - 18]+ ion for cortisol, and the [M - 30]+ ion for prednisone. The method requires no complex corrections for contributions and provides good accuracy and precision.