Efficient Synthesis of Functionalized Benzimidazoles and Perimidines: Ytterbium Chloride Catalyzed C?C Bond Cleavage

An efficient method is developed for the synthesis of functionalized benzimidazoles and perimidines by the condensation of aryl diamines with β‐carbonyl compounds catalyzed by ytterbium chloride. The reactions give good yields under mild conditions. A mechanism involving a lanthanide activated C C bond cleavage is proposed.     

Effect of Structural Parameters of TiO2 Nanotube Arrays upon Their Photocatalytic/Photoelectrocatalytic Performance

The effect of structural parameters of TiO₂ nanotube arrays (TNAs) upon their photocatalytic/photoelectro‐catalytic performance is studied by comparing the morphological characteristics and physicochemical properties with different tube lengths prepared from three kinds of electrolytes. The results show that the UV‐Vis absorption edge of TNAs red‐shifted with the increment of tube length and the short TNAs possess higher bandgap energy. The variation tendency of electrochemical window of TNAs is DMSO (5.5 V)>Cit (3.2 V)>HF (1.8 V). The long TNAs possess higher photocatalytic (PC) reactivity suggesting the surface roughness factor is the main determinant of PC efficiency, although, there is obvious recombination effects for the long TNAs. Evidenced by the positive correlation between tube length and photoelectrocatalytic (PEC) efficiency for TNAs from the same electrolyte, the enhancement of the tube length could lead to better PEC reactivity, but when the tube length is over a certain value, the PEC degradation rate no longer increases but decreases. The long TNAs with large surface roughness factor prepared from Cit and DMSO electrolytes exhibit comparative or even lower PEC performance compared with the short TNAs prepared from HF electrolyte, indicating that the PEC performance of TNAs was dominated by charge separation and photoelectron transfer properties rather than surface roughness coefficient and the tube length.     

Palladium-catalyzed Coupling between Aryl Halides and Trimethylsilylacetylene Assisted by Dimethylaminotrimethyltin

Palladium‐catalyzed coupling between aryl halides, especially less reactive ones or N‐heteroaryls, and trimethylsilylacetylene in the presence of dimethylaminotrimethyltin generated the coupled products in high yields. The reaction does not need CuI and base as auxiliary agents.     

Synthesis of 1‐Aryl‐1H‐indazoles via a Ligand‐Free Copper‐ Catalyzed Intramolecular Amination Reaction

A general synthesis of 1‐aryl‐1‐H‐indazoles from o‐halogenated aryl aldehydes or ketones and aryl hydrazines was described. This protocol included an intermolecular condensation and a ligand‐free copper‐catalyzed intramolecular Ullmann‐type coupling reaction. This method was applied to a wide range of substrates to produce the indazole products in good yields.     

Dielectric analysis on phase transition and micelle shape of polyoxyethylene trisiloxane surfactant in dilute aqueous solution

The cloudy Silwet L-77 aqueous solution on the concentration range from 0.5%to 50%was investigated by dielectric relaxation spectroscopy.The concentration dependence of phase microstructure was confirmed by means of analyzing the dielectric parameters of bulk solution.The relaxation behavior was assigned to the interfacial polarization between the micelle and the medium,and the relaxation distribution parameter was used to figure the shape transition from sphere to ellipsoid with the concentration increasing.The synchronous reduction of permittivity and conductivity indicated the formation of the lamellar phase. As compensation,the quantity of the surfactant liquid phase gradually decreased,whose shape constantly kept ellipsoidal.     

Hafnium(Ⅳ) bis(perfluorooctanesulfonyl)imide complex catalyzed direct amidomethylation for the synthesis of 1-(arylamido)-methyl-2-naphthols in fluorous medium

Hafnium(Ⅳ) bis(perfluorooctanesulfonyl)imide complex is found to be an efficient catalyst for the multicomponent condensation ofβ-naphthol,aromatic aldehydes and urea or amides in perfluorodecalin to afford the corresponding substituted amidomethyl naphthols in good yields.The remarkable features of this new procedure are high yields,shorter reaction times, reusability of catalyst and simple work-up procedures.     

胶原／磷酰胆碱复合膜的制备和性能研究

用静电纺丝-溶液浇注法制备胶原／聚2-甲基丙烯酰氧基乙基磷酰胆碱（pMPC）双层复合膜。用核磁共振波谱仪（NMR）、傅里叶变换红外光谱仪（FTIR）、热重分析仪（TG／DTG）分别表征了pMPC的化学结构、胶原／pMPC分子间的相互作用和共混相容性,用环境扫描电子显微镜（SEM）、X射线光电子能谱仪（XPS）、静态接触...     

Synthesis of copolymers of poly(ether sulfone ether ketone ketone) and poly(ether ketone diphenyl ketone ether ketone ketone) by electrophilic Friedel–Crafts solution polycondensation

A new monomer, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl(BPOBDP), was synthesized via a two‐step synthetic procedure. A series of novel poly(ether sulfone ether ketone ketone)/poly(ether ketone diphenyl ketone ether ketone ketone) copolymers were prepared by electrophilic Friedel–Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of 4,4′‐diphenoxydiphenylsulfone (DPODPS) and 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP), in the presence of anhydrous aluminum chloride and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers with 10–50 mol% DPODPS are semicrystalline and have remarkably increased T_gs over commercially available PEEK and PEKK. The copolymers with 40–50 mol% DPODPS had not only high T_gs of 170–172°C, but also moderate T_ms of 326–333°C, which are extremely suitable for melt processing. These copolymers have tensile strengths of 96.5–108.1 MPa, Young's moduli of 1.98–3.05 GPa, and elongations at break of 13–26% and exhibit excellent thermal stability and good resistance to acidity, alkali, and common organic solvents. Copyright © 2009 John Wiley & Sons, Ltd.     

Porous composite scaffolds of hydroxyapatite/silk fibroin via two‐step method

A two‐step method was used to fabricate the hydroxyapatite (HAP)/silk fibroin (SF) scaffolds, i.e. the nano‐sized HAP/SF composite powders were prepared by co‐precipitation, which were then blended with SF solution to fabricate the HAP/SF composite scaffolds. The obtained scaffolds showed a 3D porous structure. The porosity was higher than 90% with the average macropore size of 214.2 µm. Moreover, the nano‐sized HAP/SF composite powders were uniformly dispersed in the silk fibroin matrix, which provided the scaffolds enhanced compressive properties. The cell culture assay showed that the scaffolds fabricated by the two‐step method could improve the cell proliferation and osteogenic differentiation when compared with those prepared by the conventional one‐step blending method. The results suggested that the two‐step method could promote the uniform dispersion of HAP in the SF matrix and efficient combination between the HAP and the matrix, which may provide a potential application in the composite scaffold preparation for tissue engineering. Copyright © 2009 John Wiley & Sons, Ltd.     

Structure and wettability relationship of coelectrospun poly (L‐lactic acid)/gelatin composite fibrous mats

Coelectrospun polylactide(PLA)/gelatin (GE) composite fibrous matrixes have been identified to exhibit much improved performances compared to the respective components; however, the reasons for their water contact angles decreasing to zero at proper PLA/GE ratios remain unclear. To get a deep understanding of the phenomenon, PLA and GE were coelectrospun with different PLA/GE ratios in this study. Although the resulting composite fibers were homogeneous in appearance, they were detected different microscopic structures by transmission electron mircroscope (TEM) and via morphological observations after selective removal of either PLA or GE component. Together with the results of degradation study in phosphate buffered solution, a kind of cocontinuous phase separation microstructure could be identified for the PLA(50 wt%)/GE(50 wt%) composite fibers, which also showed the water contact angle of 0°. This value was far lower than those of electrospun PLA (～123°) and GE (～42°) fibrous matrixes. The X‐ray photoelectron spectrometry (XPS) data revealed that the polar side groups of protein macromolecules have moved toward composite fiber surface with solvent evaporation during electrospinning, due to the hydrophobic interaction between PLA and GE. Then the excellent hydrophilicity of PLA(50 wt%)/GE(50 wt%) composite fibers could be suggested as the consequence of: (1) the cocontinuous phase separation structure could provide more interface and void for water molecules penetrating; and (2) the accumulation of polar groups on composite fiber surface significantly increased the surface wettability. Copyright © 2010 John Wiley & Sons, Ltd.