Theoretical study of Al(n) and Al(n)O (n = 2-10) clusters

The stable structures, energies, and electronic properties of neutral, cationic, and anionic clusters of Al(n) (n = 2-10) are studied systematically at the B3LYP/6-311G(2d) level. We find that our optimized structures of Al5(+), Al9(+), Al9(-), Al10, Al10(+), and Al10(-) clusters are more stable than the corresponding ones proposed in previous literature reports. For the studied neutral aluminum clusters, our results show that the stability has an odd/even alternation phenomenon. We also find that the Al3, Al7, Al7(+), and Al7(-) structures are more stable than their neighbors according to their binding energies. For Al7(+) with a special stability, the nucleus-independent chemical shifts and resonance energies are calculated to evaluate its aromaticity. In addition, we present results on hardness, ionization potential, and electron detachment energy. On the basis of the stable structures of the neutral Al(n) (n = 2-10) clusters, the Al(n)O (n = 2-10) clusters are further investigated at the B3LYP/6-311G(2d), and the lowest-energy structures are searched. The structures show that oxygen tends to either be absorbed at the surface of the aluminum clusters or be inserted between Al atoms to form an Al(n-1)OAl motif, of which the Al(n-1) part retains the stable structure of pure aluminum clusters.     

A simple HPLC method for the determination of apigenin in mouse tissues

The flavone apigenin occurs in many leafy vegetables and fruits. It has been reported to have cancer chemopreventive efficacy in rodents. An HPLC method described previously for the determination of tricin, the dimethoxy cogener of apigenin, was modified and validated for measurement of apigenin in mouse tissues. Separation was carried out on a Hypersil-BDS C(18) column (4.6 x 250 mm) with an isocratic mobile phase of 55% methanol in 0.1 m ammonium acetate, pH 5.10, containing 0.27 mm disodium ethylenediamine tetraacetic acid. UV detection was at 336 nm, without interference from endogenous tissue compounds. The assay was linear in the range 25-400 ng/mL, 0.25-4 microg/mL and 2.5-40 microg/mL, with r(2) > 0.99 in all cases, for mouse plasma, liver and intestinal mucosa, respectively. Apigenin in mouse plasma, liver and intestinal mucosa was efficiently extracted with 0.1 m acetic acid in acetone. The assay recovery at low, medium and high concentrations was between 94.6 and 131.7% for all biomatrices, with a relative standard deviation of <10%. The lower limit of quantification for plasma was 25 ng/mL with a relative standard deviation of <15%. The method was used to measure the steady-phase apigenin levels in tissues of mice receiving apigenin in their diet.     

Direct amino acid analysis method for speciation of selenoamino acids using high-performance anion-exchange chromatography coupled with integrated pulsed amperometric detection

Speciation analysis of selenomethylcysteine (SeMeCys), selenomethionine (SeMet) and selenocystine (SeCys) has been performed using a direct amino acid analysis method with high-performance anion-exchange chromatography (HPAEC) coupled with integrated pulsed amperometric detection (IPAD). Three selenoamino acids could be baseline-separated from 19 amino acids using gradient elution conditions for amino acids and determined under new six-potential waveform. Detection limits for SeMeCys, SeMet and SeCys were 0.25, 1 and 20 microg/L (25 microL injection, 10 times of the baseline noise), respectively. The relative standard deviations (RSDs) of 200 microg/L SeMeCys, SeMet and SeCys were 3.1, 4.1 and 2.8%, respectively (n=9, 25 microL injection). The proposed method has been applied for determination of selenoamino acids in extracts of garlic and selenious yeast granule samples. No selenoamino acids were found in garlic. Both SeMet and SeCys were detected in selenious yeast tablet with the content of 45 and 129 microg Se/g, respectively. Selenoamino acids standards were spiked in garlic and yeast granule samples and the recovery ranged from 90 to 106%.     

Microcalorimetric studies on the adsorption of DNA by soil colloidal particles

This study applied TAM air isothermal calorimeter to measure the adsorption enthalpies of DNA on eight colloidal fractions from permanent-charge and variable-charge soils. The adsorption of DNA on soil colloids was also examined by equilibrium adsorption analysis. The data evaluated from isotherms fitted by Langmuirean model revealed that the affinity of DNA for variable-charge soil colloids was higher than that for permanent-charge soil colloids. More tightly bound DNA molecules were observed on coarse clays and inorganic clays than on fine clays and organic clays, respectively. The adsorption enthalpies of DNA on permanent-charge soil colloids were higher than those on variable-charge soil colloids. DNA adsorption on organic clays is endothermic, whereas that on inorganic clays is exothermic. Dehydration and electrostatic repulsion were considered to cause the higher adsorption enthalpies of DNA with organic clays, while hydrogen bonding, ligand exchange and electrostatic attraction result in the lower DNA adsorption enthalpies on inorganic clays. The thermodynamic parameters presented in this study have important implication for providing further insight into mechanisms of the adsorption of DNA on soil particles.     

Heat-treated Fe/N/C catalysts for O2 electroreduction: are active sites hosted in micropores?

Limited availability of platinum is a potential threat to fuel cell commercialization. Since the 1970s, alternative catalysts to the electrochemical reduction of oxygen have been obtained from heat treatment at T > 600 degrees C of carbon with a non-noble metal and a source of nitrogen atoms. However, the process by which the heat treatment activates these materials remains an open question. Here, we report that the activation process of carbon black and iron acetate heat-treated in NH(3) comprises three consecutive steps: (i) incorporation of nitrogen atoms in the carbon, (ii) micropore formation through reaction between carbon and ammonia, and (iii) completion of active sites in the micropores by reaction of iron with ammonia. Step (ii) is the slowest. Moreover, the microporous surface per mass of catalyst controls the macroscopic activity when enough nitrogen atoms are incorporated in the structure of the carbon support. These facts should help in determining the structure of the active sites and in identifying methods to increase the site density of such catalysts.     

A facile preparation of nanocrystalline Mo2C from graphite or carbon nanotubes

Nanocrystalline Mo₂C powders were successfully synthesized at 500 °C by reacting molybdenum chloride (MoCl₅) with C (graphite or carbon nanotube) in metallic sodium medium. X-ray powder diffractometer (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscope (XPS) and surface area analyzer (BET method) were used to characterize the samples. Experiments reveal that the carbon source used for the carbide synthesis has a great effect on the particle size and the surface area of the samples. When micro-sized graphite was used as C source the obtained nanocrystalline Mo₂C powder consists of particles of 30∼100 nm, with a surface area of 2.311 m²/g. When carbon nanotubes were used as C source, the as-synthesized Mo₂C sample is composed of particles of 20∼50 nm, with a surface area of 23.458 m²/g, which is an order of magnitude larger than that of the carbide prepared from the graphite.     

A gravity driven micro flow injection wetting film extraction system on a polycarbonate chip

A micro flow injection wetting film liquid-liquid extraction system has been developed for trace analyte concentration and on-chip detection. A hydrophobic channel fabricated on a polycarbonate chip was used to support the wetting film, and hydrostatic pressure generated by the difference in liquid levels was employed to drive the fluids. Sequential injection of segments of aqueous sample solution and organic solvent was conducted by switching the sample- or solvent-containing vials to an on-chip sampling probe, and detection was performed by a co-focused, laser induced fluorescence detector. Using butyl rhodamine B as a model analyte and butanol as the solvent for both film-coating and elution, various experimental conditions such as hydrostatic pressure, coating time, channel length, sampling volume, and sample acidity were investigated. Under optimized conditions, a 24-fold enrichment factor was obtained with the consumption of about 3 μL sample solution, and a detection limit (3σ) of 6.0 × 10⁻⁹ M butyl rhodamine B was achieved at the sampling rate of 19 h⁻¹. Eleven consecutive runs of a 1.0 × 10⁻⁵ M butyl rhodamine B solution produced a relative standard deviation of 1.5% for the detected fluorescence signals.     

Seeded-growth approach to fabrication of silver nanoparticle films on silicon for electrochemical ATR surface-enhanced IR absorption spectroscopy

Ag nanoparticle films (simplified as nanofilms hereafter) on Si for electrochemical ATR surface enhanced IR absorption spectroscopy (ATR-SEIRAS) have been successfully fabricated by using chemical deposition, which incorporates initial embedding of Ag seeds on the reflecting plane of an ATR Si prism and subsequent chemical plating of conductive and SEIRA-active Ag nanofilms. Two alternative methods for embedding initial Ag seeds have been developed: one is based on self-assembly of Ag colloids on an aminosilanized Si surface, whereas the other the reduction of Ag+ in a HF-containing solution. A modified silver-mirror reaction was employed for further growth of Ag seeds into Ag nanofilm electrodes with a theoretically average thickness of 40-50 nm. Both Ag seeds and as-deposited Ag nanofilms display island structure morphologies facilitating SEIRA, as revealed by AFM imaging. The cyclic voltammetric feature of the as-prepared Ag nanofilm electrodes is close to that of a polycrystalline bulk Ag electrode. With thiocyanate as a surface probe, enhancement factors of ca. 50-80 were estimated for the as-deposited Ag nanofilms as compared to a mechanically polished Ag electrode in the conventional IRAS after reasonable calibration of surface roughness factor, incident angles, surface coverage, and polarization states. As a preliminary example for extended application, the pyridine adsorption configuration at an as-deposited Ag electrode was re-examined by ATR-SEIRAS. The results revealed that pyridine molecules are bound via N end to the Ag electrode with its ring plane perpendicular or slightly tilted to the local surface without rotating its C2 axis about the surface normal, consistent with the conclusion drawn by SERS in the literature.     

Sulfono‐γ‐AApeptides as a New Class of Nonnatural Helical Foldamer

Foldamers offer an attractive opportunity for the design of novel molecules that mimic the structures and functions of proteins and enzymes including biocatalysis and biomolecular recognition. Herein we report a new class of nonnatural helical sulfono‐γ‐AApeptide foldamers of varying lengths. The crystal structure of the sulfono‐γ‐AApeptide monomer S6 illustrates the intrinsic folding propensity of sulfono‐γ‐AApeptides, which likely originates from the bulkiness of tertiary sulfonamide moiety. The two‐dimensional solution NMR spectroscopy data for the longest sequence S1 demonstrates a 10/16 right‐handed helical structure. Optical analysis using circular dichroism further supports well‐ defined helical conformation of sulfono‐γ‐AApeptides in solution containing as few as five building blocks. Future development of sulfono‐γ‐AApeptides may lead to new foldamers with discrete functions, enabling expanded application in chemical biology and biomedical sciences.