Solubility of methane in octane + ethanol at temperatures from 303.15 K to 333.15 K and pressures up to 12.01 MPa

Solubility of methane in octane + ethanol was measured at temperatures ranging from 303.15 K to 333.15 K and pressures ranging from 2.60 MPa to 12.01 MPa. Experimental data were analyzed using the Soave-Redlich-Kwong equation of state with three types of mixing rules, and the estimated average deviation from the experimental solubility data was less than 3.5 %.     

Non-linear modeling and dynamic analysis of hydraulic control valve; effect of a decision factor between experiment and numerical simulation

Numerical problems that are usually ignored in the dynamic analysis of hydraulic control valves are described, and an analysis of the effects of such problems on the numerical modeling is provided. Previous studies have ignored the effects of changes in the flow coefficient in the orifice, the solenoid force along the spool movement in the valve and an ascending tendency of pressure during reach to the steady state. To eliminate these problems, it was studied a method to substantiate the non-linearity of the pressure loss caused by passing between the orifice and port as well as that caused by interaction with the solenoid. Moreover, the movement of the spool and spring is expressed using the time-delay-element (TDE). The proposed numerical model has been used in the Bond graphs method of a hydraulic control valve and the simulation results have been shown to be accurate. It is known that differences between simulated and experimental results can have a considerable impact on the function of actual systems. The contribution of each parameter is measured separately for the transient state and steady state. Analysis standard observed the first peak value, pressure increase to the steady state and the settling time in the response results.     

碱化法制备聚合氯化铁絮凝剂的稳定性和形态分布研究

采用碱化法制备高浓度聚合氯化铁工艺得到了不同碱化剂和稳定剂的不同加入时间对形态分布的影响，以及碱化剂加入速度和碱化度对稳定性的影响，研究结果表明：作为碱化剂，NaHCO3优于NaOH；先加入稳定剂的制备方法对提高PFC的稳定性及混凝特性有利；在碱化度B=0．4时制备的PFC稳定性最差。     

声表面波MIM隧道发光二极管

我们在研究MIM隧道发光结(金属-绝缘层-金属)的过程中,首次以表面声波代替表面随机粗糙度的作用,将MIM结制作在声表面波场中,结果使结的发光效率、发光强度、稳定性、均匀性都有改善.本文介绍了结的基本结构,基本工艺,阐明了结的发光机理,讨论了结的Ⅰ-Ⅴ特性曲线和光谱曲线,根据结具有显著的负阻现象,我们设计出了一种新型的开关器件.