纳米WO3的制备及其光解水析氧性能研究

用溶胶凝胶法,灼烧法合成了纳米级WO3,采用X-射线衍射、紫外可见漫反射光谱对WO3进行表征.在Fe3 为电子受体、溶液酸度pH为2.0情况下,研究了纳米级WO3在365nm紫外辐射下光解水析氧的光催化活性,并讨论了不同方法制备的催化剂活性差异的原因.结果表明,结晶程度越高、尺寸越小、比表面积越大的纳米级WO3具有更高的光分解水析氧活性,电子受体的浓度、溶液的酸度对析氧活性有明显的影响.     

Investigation on crosslinking behaviors of NBR/PVC filled with anhydrous copper sulfate particles by dynamic mechanical analysis

Crosslinking behaviors of acrylonitrile butadiene rubber (NBR)/poly (vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, were investigated for the first time by dynamic mechanical analysis (DMA) under hetero and isothermal modes, respectively. In the heterothermal testing, (NBR/PVC)/CuSO₄ compound showed two marked increases in the storage modulus (E′), corresponding to coordination crosslinking of NBR-CuSO₄ and self-crosslinking of NBR and PVC respectively. During the isothermal testing, a dramatic increase in E′ was found at the initial stage while that of original NBR/PVC alloy was not detected. The marked increase in E′ of (NBR/PVC)/CuSO₄ compound was mainly due to the crosslinking induced by coordination between  CN and Cu²⁺. The increasing extent of E′ increased with the rise of CuSO₄ content, suggesting the formation of a greater number of crosslinks. Moreover, the activation energy (E_a) of crosslinking process was about 139 kJ/mol. In this work, fourier transform infrared spectrum (FT-IR) and equilibrium swelling method were also performed for the characterization of the compound. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 41–51, 2007     

Simplified analytic solutions and a novel fast algorithm for Yb-doped double-clad fiber lasers

In this paper, continuous wave Yb³⁺-doped double-clad fiber lasers (DCFLs) with linear-cavity are investigated theoretically and numerically using the rate equations. Under the steady state conditions, the simplified analytic solutions of Yb³⁺-doped DCFLs under considering the scattering loss are deduced in the strongly pump condition. Compared with the known analytic solutions in published literatures, our analytic solutions are more accurate, especially, at higher reflectivity of output mirror. In addition, a fast and stable algorithm based on the Newton-Raphson method is proposed to simulate numerically Yb³⁺-doped DCFLs. The results by simplified analytic solutions are in good agreement with those by the numerical simulation. Moreover, we have performed the optimization of an Yb³⁺-doped DCFL using the simplified analytic solutions and the numerical simulations, respectively.     

On existence of solutions for some hyperbolic-parabolic-type chemotaxis systems

In this paper, we discuss the local and global existence ofweak solutions for some hyperbolic–parabolic systems modellingchemotaxis.     

Numerical solution of differential equations using Sinc method based on the interpolation of the highest derivatives

In general, we will use the numerical differentiation when dealing with the differential equations. Thus the differential equations can be transformed into algebraic equations and then we can get the numerical solutions. But as we all have known, the numerical differentiation process is very sensitive to even a small level of errors. In contrast it is expected that on average the numerical integration process is much less sensitive to errors. In this paper, based on the Sinc method we provide a new method using Sinc method incorporated with the double exponential transformation based on the interpolation of the highest derivatives (SIHD) for the differential equations. The error in the approximation of the solution is shown to converge at an exponential rate. The numerical results show that compared with the exiting results, our method is of high accuracy, of good convergence with little computational efforts. It is easy to treat nonhomogeneous mixed boundary condition for our method, which is unlike the traditional Sinc method.     

On the Bounded Complex of an Affine Oriented Matroid

We prove that the bounded complex of an affine oriented matroid is pure and collapsible. We also generalize Zaslavsky's central decomposition theorem for hyperplane arrangements to affine oriented matroids.     

Solvothermal synthesis of TiO2: anatase nanocrystals and rutile nanofibres from TiCl4 in acetone

This work reports a new synthetic approach for single‐phase TiO₂ nanomaterials by solvothermal treatment of titanium tetrachloride in acetone at 80–110 °C. Small, uniform, and yet size‐tunable (5–10 nm) anatase titania nanocrystallites were obtained using a low concentration of TiCl₄ in acetone (i.e., at molar ratios of TiCl₄/acetone ≤ 1:15) in the temperature range of 80–110 °C, while rutile nanofibers were synthesized using a high concentration of TiCl₄ (e.g., TiCl₄/acetone = 1:10) at 110 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

充分发挥物理学在建设创新型国家中的基础作用

胡锦涛主席在全国科技大会上提出的，坚持走中国特色自主创新道路，建设创新型国家的口号，正在激励全国各族人民为实现我国中长期发展目标而奋斗．如何理解、实践这个口号，把每个行业、每个领域建设成创新型子系统，从而使整个国家有效地向着创新型国家目标发展，是13亿中国人民共同的任务，是历史赋予当代炎黄子孙的使命。我们必须在深入学习、研究理解胡锦涛主席关于“坚持走中国特色的自主创新道路，为建设创新型国家而奋斗”重要讲话的基础上，对本专业领域的创新型发展提出奋斗目标，作出科学规划。为此，我们就此主题谈一些想法，以期引起物理学界和教育界的朋友们深入思考、研究。     

A side-coupled photonic crystal filter with sidelobe suppression

This paper presents the theoretical model and the optimization method to suppress the sidelobes of side-coupled photonic crystal filters. Numerical verification shows a good agreement between the theoretical method and the finite-difference time-domain simulation, but the theoretic method does not involve the time-consuming computation. The theoretical method also presents a better physical image for choosing the critical parameters, such as the quality factor, phase shift and the number of resonators. Based on the theoretical model, two optimization methods (chirp and cascading) are proposed to deeply suppress the sidelobes. They also show more flexibility in controlling the bandwidth and steepness of the roll-off in the filter. PACS 42.70.Qs