Enhanced stabilization of aerosol-OT surfactant monolayer upon interaction with small amounts of bovine serum albumin at the air-water interface

An investigation is made of the influence from small amounts of the protein bovine serum albumin (BSA) on the lateral organization of low molecular weight surfactant sodium bis-2-ethylhexyl sulfosuccinate (AOT) at the air-water interface. Surface pressure (pi - A), surface potential (deltaV - A) and Brewster angle microscopy (BAM) experiments were carried out, with particular emphasis on the monolayer stability under successive compression-expansion cycles. AOT monolayer is not stable at the air-water interface, which means that the majority of AOT molecules go into the aqueous subphase as monomers and/or normal micelles. When a waiting time elapses between spreading and compression, the surfactant monolayer tends to reorganize partially at the air-water interface, with a monolayer expansion being observed for waiting times as large as 12 h. The incorporation of very small amount of BSA (10(-9)M) at the interface, also inferred from BAM, increases the monolayer stability as revealed by pi - A and deltaV - A results. For a waiting time of circa 3 h, the mixed monolayer reaches its maximum stability. This must be related to protein (and/or protein-surfactant complexes) adsorbed onto the AOT monolayer, thus altering the BSA conformation to accommodate its hydrophobic/hydrophilic residues. Furthermore, the effects from such small amounts of BSA in the monolayer formation and stabilization mean that the AOT monolayer responds cooperatively to BSA.     

Phase transitions in Langmuir monolayer of long chain attached fluorescein studied by second harmonic generation technique

Optical second harmonic generation (SHG) measurements coupled with Π-A isotherms have been shown to be helpful, for the following and comprehension of orientational orders and phase transitions in Langmuir monolayers. Using the SHG-(Π-A) measurements, monolayers of 5-hexadecanoylaminofluorescein on the water surface were examined by monolayer compression. The phase transitions were noticeably revealed. Dependence of the square root of the intensities polarizations quotient in the molecules surface density, allowed establishing tilting orientation alignment phases. In addition, change in the monolayer symmetry C_∞v→C_2v as it goes through the LE–LC phase transition, was clearly recognized. It was concluded that a possible change in β is taking place due to aggregate formation.     

Phenol removal from aqueous solution by adsorption and ion exchange mechanisms onto polymeric resins

The removal of phenol from aqueous solution was evaluated by using a nonfunctionalized hyper-cross-linked polymer Macronet MN200 and two ion exchange resins, Dowex XZ (strong anion exchange resin) and AuRIX 100 (weak anion exchange). Equilibrium experimental data were fitted to the Langmuir and Freundlich isotherms at different pHs. The Langmuir model describes successfully the phenol removal onto the three resins. The extent of the phenol adsorption was affected by the pH of the solution; thus, the nonfunctionalized resin reported the maximum loading adsorption under acidic conditions, where the molecular phenol form predominates. In contrast both ion exchange resins reported the maximum removal under alkaline conditions where the phenolate may be removed by a combined effect of both adsorption and ion exchange mechanisms. A theoretical model proposed in the literature was used to fit the experimental data and a double contribution was observed from the parameters obtained by the model. Kinetic experiments under different initial phenol concentrations and under the best pH conditions observed in the equilibrium experiments were performed. Two different models were used to define the controlling mechanism of the overall adsorption process: the homogeneous particle diffusion model and the shell progressive model fit the kinetic experimental data and determined the resin phase mechanism as the rate-limiting diffusion for the phenol removal. Resins charged after the kinetic experiments were further eluted by different methods. Desorption of nonfunctionalized resin was achieved by using the solution (50% v/v) of methanol/water with a recovery close to 90%. In the case of the ion exchange resins the desorption process was performed at different pHs and considering the effect of the competitive ion Cl⁻. The desorption processes were controlled by the ion exchange mechanism for Dowex XZ and AuRIX 100 resins; thus, no significant effect for the addition of Cl⁻ under acidic conditions was observed, while under alkaline conditions the total recovery increased, specially for Dowex XZ resin.     

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. On the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein.     

Preclinical Investigation of Methylene Blue-mediated Antimicrobial Photodynamic Therapy on Leishmania Parasites Using Real-Time Bioluminescence

Cutaneous leishmaniasis (CL) is a neglected disease that promotes destructive lesions. Difficulties in treatment are related to accessibility of drugs, resistance and toxicity. Antimicrobial photodynamic therapy (APDT) has been emerging as a promising treatment for CL. In this work, we evaluated methylene blue (MB)-mediated APDT (MB-APDT) on Leishmania amazonensis in vitro and in vivo by bioluminescence technique. In vitro, MB-APDT was performed using a red LED (λ = 660 ± 11 nm, 100 mW cm⁻²) and MB (100 µm ) at different light doses. In vivo, mice were infected and 4 weeks later, randomly divided into three groups: control, APDT 1 (single session) and APDT 2 (two sessions of MB-APDT). MB was used at 100 µm and energy dose was established at 150 J cm⁻². Parasite burden, lesion size and pain were evaluated weekly for 4 weeks. In vitro, lethal dose for 90% parasite inactivation was achieved at 48.8 J cm⁻². In vivo, although APDT 1 and APDT 2 groups have showed similar parasite burden after 4 weeks, two sessions were clinically better, especially considering the inflammatory process associated to CL. Our findings reinforce MB-APDT as a cost-effective treatment to combat CL.     

An analytical application of the electrocatalysis of the iodate reduction at tungsten oxide films

Films of non-stoichiometric tungsten oxides have been deposited onto glassy carbon surfaces by electrodeposition from acidic W(VI) solutions and the chemical stability of these oxides was investigated by using the electrochemical quartz crystal microbalance. At these modified surfaces, rotating disc electrode voltammetric experiments indicated that iodate is electrocatalytically reduced in a mass-transport controlled process. The influence of the film thickness on the response to iodate was investigated and the results indicated a linear relationship between catalytic current and film thickness for relatively thin oxide layers. The modified electrode was employed successfully as an amperometric sensor for iodate in a flow injection apparatus. The linear response of the developed method is extended from 5 μmol L⁻¹ to 5 mmol L⁻¹ iodate with a limit of detection (signal-to-noise = 3) of 1.2 μmol L⁻¹. The repeatability of the method for 41 injections of a 1 mmol L⁻¹ iodate solution was 0.8% and the throughput was determined as 123 h⁻¹. Interference from other oxidant anions such as nitrate and nitrite was not noticeable, whereas bromate and chlorate interfere at slight levels. The method was used in the determination of the iodate content in table salt samples.     

Chlorpromazine and sodium dodecyl sulfate mixed micelles investigated by small angle X-ray scattering

Small-angle X-ray scattering (SAXS) studies are reported on the interaction of chlorpromazine (CPZ) with micelles of anionic surfactant sodium dodecyl sulfate (SDS). Isotropic solutions of SDS (40 and 100 mM) at pH 4.0, 7.0, and 9.0 in the absence and presence of CPZ (2-25 mM) were investigated at the National Laboratory of Synchrotron Light (LNLS, Campinas, Brazil). The data were analyzed through the modeling of the micellar form factor and interference function. The results evidence a micellar shape transformation from prolate ellipsoid to cylinder accompanied by micellar growth and surface charge screening as the molar ratio CPZ : SDS increases in the complex. Small ellipsoids with axial ratio nu=1.5+/-0.1 at 40 mM SDS grow and reassemble into cylinder-like aggregates upon 5 mM drug incorporation (1 CPZ : 8 SDS monomers) with a decrease of the micelle surface charge. At 10 mM CPZ : 40 mM SDS cylindrical micelles are totally screened with an axial ratio nu approximately 2.5. The data also indicate the presence of small prolate ellipsoids (nu=1.7+/-0.1) in solutions of 100 mM SDS (no drug) and micellar growth (nu approximately 2.0 and 4.0) when 10 and 25 mM CPZ are added to the system. In the latter case, the aggregate is also better represented by a cylinder-like form. Therefore, our results demonstrate that the axial ratio and shape evolution of the surfactant : phenothiazine complex are both SDS concentration and drug : SDS molar ratio dependent. The drug location close to the SDS polar headgroup region without disrupting in a significant way both the paraffinic hydrophobic core and the polar shell thickness is inferred. SAXS data made it possible to obtain the shapes and dimensions of CPZ/SDS aggregates.     

Nanostructured Polymeric Micelles Carrying Xanthene Dyes for Photodynamic Evaluation

It was evaluated the properties of the xanthene dyes Erythrosin B, Eosin Y and theirs Methyl, Butyl and Decyl ester derivatives as possible photosensitizers (PS) for photodynamic treatments. The more hydrophobic dyes self‐aggregate in water/ethanol solutions above 70% water (vol/vol) in the mixture. In buffered water, these PS were encapsulated in Pluronic polymeric surfactants of P‐123 and F‐127 by two methodologies: direct addition and the thin‐film solid dispersion methods. The thin‐film solid method provided formulations with higher stabilities besides effective encapsulation of the PS as monomers. Size measurements demonstrated that Pluronic forms self‐assembled micelles with uniform size, which present slightly negative surface potential and a spherical form detected by TEM microscopy. The ester length modulates xanthene localization in the micelle, which is deeper with the increase in the alkyl chain. Moreover, some PS are distributed into two populations: one on the corona micelle interface shell (PEO layer) and the other into the core (PPO region). Although all PS formulations show high singlet oxygen quantum yield, promising results were obtained for Erythrosin B esters with the hydrophobic P‐123, which ensures their potential as drug for clinical photodynamic applications.     

Fractal structure of digital speckle patterns produced by rough surfaces

We report on the fractal analysis of digital speckle patterns experimentally generated using an optical setup to record the light scattered from metallic rough surfaces in the normal direction. Using the differential box counting technique, we have calculated the fractal dimension of digital speckle patterns for six samples with different roughness. Our results show a quadratic dependence between the surface roughness and the fractal dimension of the corresponding digital speckle pattern. As an application a method to determine the surface roughness of metallic surfaces is proposed.     

Understanding the inactivation process of organophosphorus herbicides: A DFT study of glyphosate metallic complexes with Zn2+, Ca2+, Mg2+, Cu2+, Co3+, Fe3+, Cr3+, and Al3+

Glyphosate is the active component of one of the top‐selling herbicides, which is also a potent EPSP synthase inhibitor. The herbicide is absorbed by living tissue and translocated via the phloem, to plant roots and rhizomes. When applied directly into the soil it has low activity, due to the high adsorption by soil constituents. Understanding the specific interactions between metals in the soil and glyphosate is the main step in understanding the low activity of the herbicide when applied directly into the ground and not pulverized. We can observe there is a stability order for both tetrahedral and octahedral complexes between glyphosate and metals: Zn>Cu>Co>Fe>Cr>Al>Ca>Mg. © 2012 Wiley Periodicals, Inc.