Microfluidic devices obtained by thermal toner transferring on glass substrate

A new process for the manufacture of microfluidic devices based on deposition of laser-printing toner on glass substrates is described. It is an alternative method to the toner on polyester film (toner-polyester) one, previously introduced. Commercial laser printers cannot print directly on glass, thus the toner must first be printed on a special paper and then transferred by heating under pressure to the glass surface. Although this procedure is more complex than the toner-polyester one, it can be repeated several times, yielding multiple toner layers. Even without special alignment equipment, up to four layers could be satisfactorily piled up. Characterization tests revealed that the toner-glass devices have similar behavior as toner-polyester ones regarding the toner layer porosity. The main advantages of the toner-glass technology are improved mechanical stability, possibility of multiple toner layers, augmented electroosmotic flow (EOF), and improved heat transfer. On the other hand, toner adhesion to glass is weaker than to polyester, which limits the device lifetime and usable liquid media. The measured EOF mobility (3.5 x 10(-4) cm2.V(-1).s(-1) for pH 7) suggests that it is mainly determined by the glass surface, being little influenced by the toner walls. Microchip electrophoresis with contactless conductivity detection and photometric detection were implemented using toner-glass devices.     

Mass spectrometry study of the fragmentation of valence and core-shell (Cl 2p) excited CHCl3 and CDCl3 molecules

The dissociative photoionization of the chloroform and chloroform-d molecules has been studied in the valence region and around the chlorine 2p edge. Time-of-flight mass spectrometry in the coincidence mode-namely, photoelectron-photoion coincidence (PEPICO)-was employed. He I lamp and tunable synchrotron radiation were used as light sources. Total and partial ion yields have been recorded as a function of the photon energy. Singly, doubly, and triply ionized species have been observed below (195 eV), on (201 eV), and above (230 eV) the Cl 2p resonances. A definite degree of site-selective fragmentation was observed at the Cl 2p resonance as the relative contributions of several ionic species were seen to go through a maximum at 201 eV. At the same time all stable doubly charged ions were also observed at 198 eV (below the 2p resonances), resulting from direct ionization processes. Isotopic substitution is shown to provide a very efficient means of improving the mass resolution and assignment of unresolved peaks in spectra of CHCl(3), particularly for those fragments differing by a hydrogen atom. It is suggested that ultrafast fragmentation of the system following 2p excitation to a strongly antibonding state contributes to the large amount of Cl(+) observed in the PEPICO spectrum measured at 201 eV. Kinetic energy distributions were determined for the H(+), D(+), and Cl(+) fragments.     

Study of the Interaction of Bis(4‐pyridylthio)methane with Copper(II) Chloride and Bromide

The new ligand bis(4‐pyridylthio)methane (4‐bpytm) ( 1 ) and its complexes [CuX₂(4‐bpytm)] and [CuX₂(4‐bpytm)₂] (X = Cl and Br) ( 2 – 5 ) have been prepared and characterized by elemental analysis, IR‐Raman, UV/Vis spectroscopy. The structures of (4‐bpytm) ( 1 ), [CuCl₂(4‐bpytm)₂] ( 3 ) and [CuBr₂(4‐bpytm)₂] ( 4 ) were determined by single‐crystal X‐ray diffraction analysis. X‐ray analysis of the 1:2 derivatives reveals that the copper atom has a distorted (4 + 2) octahedral environment. The copper atom is coordinated by four nitrogen atoms from four bridging 4‐bpytm ligands and two halogen atoms. The axial Cu–N bonds are considerably longer than the equatorial Cu–N bonds owing to JahñTeller distortion. CuX₂ units are linked to each other through bridging 4‐bpytm ligands to form a 2D interpenetrated coordination polymer. The structural parameters of the 4‐bpytm ligand in these complexes were compared with those of the free ligand.     

Liquid-vapor isotherm in a closed single-component system with curved interfaces

A thermodynamic model to obtain the radius of bubbles or droplets in a single-component system for a given temperature, total volume, and phase distribution is developed. The general formulation of the model includes bubbles or droplets in the form of spheres, truncated spheres on a flat solid surface or inside conical walls. In these three geometries the liquid-vapor curvature radius is positive but in the case of conical walls it can be also negative. States with different dispersed-phase distributions are compared using the total free energy of the system. When the curvature radius is positive, it has a minimum nonvanishing value and the occurrence of the Ostwald ripening is energetically favorable. On the other hand, when the curvature radius is negative, it is energetically more favorable to find the dispersed phase even in the expected single-phase region, and the occurrence of an anti-ripening phenomenon. The PV isotherms obtained from the model and the applicability of the results to the nucleation process are discussed.     

Development of a new sequential injection in-line cloud point extraction system for flame atomic absorption spectrometric determination of manganese in food samples

A preconcentration method for manganese determination by sequential injection cloud point extraction with subsequent detection by flame atomic absorption spectrometry (FAAS) has been developed. The enrichment of Mn was performed after a preliminary on-line cloud point extraction and entrapment of manganese-containing surfactant aggregated within a minicolumn packed with cotton. The laboratory-made reagent 4-(5′-bromo-2′-thiazolylazo)orcinol (Br-TAO) and the surfactant Triton X-114 were used for cloud point extraction. The manganese ions were eluted with sulphuric acid solution and directly introduced into the FAAS. Chemical and flow variables affecting the preconcentration were studied. Using a sample volume of 2.80 mL the limit of detection and enrichment factor were calculated to be 0.5 μg L⁻¹ and 14, respectively. The sample frequency is 48 h⁻¹, considering a total run cycle of 75 s. The accuracy of the proposed method has been demonstrated by the analysis of the certified reference biological materials rice flour and tomato leaves. The method has been applied to determination of manganese in food samples.     

A capillary electrophoresis system with dual capacitively coupled contactless conductivity detection and electrospray ionization tandem mass spectrometry

A commercial system that is comprised of a CE coupled to an ESI triple quadrupole mass spectrometer was equipped with two capacitively coupled contactless conductivity detectors (C⁴Ds). The first C⁴D was positioned inside the original cartridge, and the second C⁴D was positioned as close as possible to the ESI probe entrance by using a 3D‐printed support. The C⁴Ds electropherograms were matched to the ESI‐MS electropherogram by correcting their timescales by the factor L_T/L_D, where L_T and L_D are the total capillary length and the length until the C⁴D, respectively. A general approach for method development supporting the simultaneous conductivity and MS detection is discussed, while application examples are introduced. These examples include the use of C⁴D as a simple device that dismiss the use of an EOF marker, a low‐selectivity detector that continuously provide information about unexpected features of the sample, and even a detector that can be more sensitive than ESI‐MS. The C⁴D used in this setup proved to have a smaller contribution to the peak broadening than ESI‐MS, which allowed that a C⁴D, positioned at 12 cm from the inlet of an 80‐cm‐long capillary, could be used to foresee position and shape of the peaks being formed 6.8 times slower at the ESI‐MS electropherogram.     

Purification and Characterization of an Ethanol-Tolerant β-Glucosidase from Sporidiobolus pararoseus and Its Potential for Hydrolysis of Wine Aroma Precursors

An extracellular ethanol-tolerant β-glucosidase from Sporidiobolus pararoseus was purified to homogeneity and characterized, and its potential use for the enhancement of wine aroma was investigated. The crude enzymatic extract was purified in four steps (concentration, dialysis, ultrafiltration, and chromatography) with a yield of around 40 % for total activity. The purified enzyme (designated Sp-βgl-P) showed a specific activity of approximately 20.0 U/mg, an estimated molecular mass of 63 kDa after sodium dodecyl sulfate polyacrylamide gel electrophoresis, and isoelectric point of 5.0 by isoelectric focusing. Sp-βgl-P has optimal activity at pH 4.0 and at 55 °C. It was stable in a broad pH range at low temperatures and it was tolerant to ethanol and glucose, indicating suitable properties for winemaking. The hydrolysis of glycosidic terpenes was analyzed by adding Sp-βgl-P directly to the wines. The released terpene compounds were evaluated by gas chromatography/mass spectrometry. The enzymatic treatment significantly increased the amount of free terpenes, suggesting that this enzyme could potentially be applicable in wine aroma improvement.     

Evidence of intrinsic ferromagnetic behavior of thiol capped Au nanoparticles based on μSR results

Ever since the first studies of magnetic Au nanoparticles (NPs) were published, few have been the element specific techniques or microscopic probes used to unequivocally determine the origin of their novel magnetic behavior. Here, we report muon spin relaxation (μSR) results of dodecanethiol capped Au NPs, showing the inherent signature of an ordered magnetic state. The particles have been synthesised by modification of the so-called Brust–Schiffrin method and characterized by means of TEM and SQUID magnetometry.     

Report of in vitro antileishmanial properties of Iberian macroalgae

Here is reported the anti Leishmania infantum activity of 48 hexane, CH₂Cl₂ and MeOH extracts from 16 macroalgae collected on the Iberian Coast. Seven hexane and CH₂Cl₂ Cystoseira baccata, Cystoseira barbata, Cystoseira tamariscifolia, Cystoseira usneoides, Dictyota spiralis and Plocamium cartilagineum extracts were active towards promastigotes (IC₅₀ 29.8–101.8 μg/mL) inducing strong morphological alterations in the parasites. Hexane extracts of C. baccata and C. barbata were also active against intracellular amastigotes (IC₅₀ 5.1 and 6.8 μg/mL, respectively). Fatty acids, triacylglycerols, carotenoids, steroids and meroterpenoids were detected by nuclear magnetic resonance (NMR), and gas chromatography in the Cystoseira extracts. These results suggest that Cystoseira macroalgae contain compounds with antileishmanial activity, which could be explored as scaffolds to the development of novel sources of antiparasitic derivatives.