Development of pressurized liquid extraction and cleanup procedures for determination of organochlorine pesticides in soils

The scope of this work is the development of a rapid, reliable and sensitive method for the analysis of organochlorine pesticides from soils by pressurized liquid extraction (PLE). The effect of four parameters (temperature, pressure, static time and cell volume) on the extraction efficiency was studied. The great extracting power of the PLE causes the extraction of numerous interfering substances, so a more efficient purification of this extract was necessary. In this work several sorbents have also been assayed to carry out the purification of soil samples: Florisil, silica, alumina, carbon, as well as combinations of them. Finally, the proposed analytical method was validated using a certified reference soil material (CRM804-050) and the results were compared with those obtained by other extraction techniques (Soxhlet and microwave-assisted extraction).     

Stereoselective Rh-catalyzed hydrogenation of cyclobutyl chiral enamides: double stereodifferentiation vs catalyst-controlled diastereoselection

The hydrogenation reactions of several cyclobutyl enamides derived from (-)-alpha-pinene or (-)-verbenone have been investigated by using different catalysts. The chiralities of both the substrate and the catalyst as well as the Z/E stereochemistry of the double bond have been considered, and the observed diastereoselectivity has been rationalized. For enamides with the double bond separated from the cyclobutane by a methylene, the Wilkinson catalyst did not induce any diastereoselection, but excellent diastereoselectivity was observed when using Et-DuPHOS-Rh and ChiraPHOS-Rh. The configuration of the new stereogenic center was catalyst-dependent and can be rationalized according to the Halpern mechanism. For (Z)-enamides with the double bond directly linked to the cyclobutane ring, the chirality of the substrate governed the diastereoselection and the Halpern mechanism seemed not to be operative in the hydrogenation with ChiraPHOS, with the configuration of the new stereogenic center being determined by steric effects. On the contrary, the chirality of the catalyst was the factor determining the stereochemistry of the major products with alkyl-DuPHOS-Rh. Z/E stereochemistry influenced the stereodifferentiation, and a different behavior for each Z or E stereoisomer was found. For both (Z)- and (E)-enamides, some instances of match/mismatch between the chirality of the substrate and that of the catalyst were observed. As a result of all of these studies, a series of new cyclobutyl alpha-amino acids has been synthesized. These products are interesting to incorporate into conformationally constrained peptides.     

Evaluating the significance threshold in robustness testing. A critical discussion on the influence of time in molecular fluorescence spectrometry

Robustness experiments are performed in analytical chemistry to assess the behaviour of an analytical procedure under conditions slightly different from those of the experimental optimum. This work presents a study of robustness applied to a previously proposed fluorescent methodology using two replicated 2(7-4) saturated fractional factorial designs. A comparison is established between three different ways to test the significance of the effects of the variables involved on the response signal. Critical discussions about the most appropriate threshold to be introduced when testing for significance of the factors and the influence of the time necessary to carry out the experiments are included.     

Study of Ligand Substitution Reactions at Pentacyanoferrates(II) in Aqueous Salt and Micellar Solutions

The ligand substitution reactions Fe(CN)(5)(4-(t)bupy)(3-) + 4-CNpy and Fe(CN)(5)(4-(t)bupy)(3-) + pzCO(2)(-) (4-(t)Bupy = 4-tert-butylpyridine; 4-CNpy = 4-cyanopyridine; pzCO(2)(-) = pyrazinecarboxylate) were studied in several aqueous salt and micellar solutions. Kinetic data in aqueous solutions showed that the two processes follow a dissociative mechanism, D, and the dependence of the first-order rate constants on [salt] on electrolyte aqueous solutions allow the estimation of the activation volumes corresponding to both reactions. Under true first-order conditions no kinetic micellar effects were found in anionic (SDS) and nonionic (Triton X-100) aqueous micellar solutions. In cationic micellar solutions (CTAB, CTAC, and TTAB) small kinetic micellar effects were found. These were related to the different ionic concentrations and the different polarity and structure of the Stern layer surrounding the cationic micellar aggregates, where the reactions take place, with respect to pure water. Copyright 2000 Academic Press.     

Adsorptive stripping voltammetry of Tartrazine at the hanging mercury drop electrode in soft drinks

Adsorptive stripping voltammetry was used for the determination of trace amounts of the dye Tartrazine (E-102) by square-wave (SWS) and differential pulse techniques (DPS). Its adsorptive voltammetric behaviour was investigated at different pH media. NH₄Cl/NH₃ buffer solution was chosen as the most suitable, taking into account the sensitivity and definition of the reduction peaks obtained. The effects of the experimental parameters on the determination are discussed. Standard deviations of 3.3% and 2.6% were obtained by SWS and DPS for 100 and 50 μg/L Tartrazine solutions, respectively (n = 10). Both methods were applied to determine the dye in several commercial soft drinks, containing very small amounts of it. Measurements were made directly in the commercial samples. A comparison of the results obtained by the proposed voltammetric methods with those of an HPLC method was also made. Good correlations between the voltammetric results and the values supplied by the manufacturer were found, whereas recoveries of the same order of magnitude were obtained by the HPLC method. Received: 23 May 1996 / Revised: 5 July 1996 / Accepted: 10 July 1996     

Selection of thermotolerant yeasts for simultaneous saccharification and fermentation (SSF) of cellulose to ethanol

A total of 27 yeast strains belonging to the groupsCandida, Saccharomyces, andKluyveromyces were screened for their ability to grow and ferment glucose at temperatures ranging 32-45°C. K. marxianus andK. fragilis were found to be the best ethanol producing organisms at the higher temperature tested and, so, were selected for subsequent simultaneous saccharification and fermentation (SSF) studies.     

Solid-phase extraction-liquid chromatography-fluorimetry for organotin speciation in natural waters

Summary A method is reported for the determination of dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT), and triphenyltin (TPhT) species at the nanogram per litre concentration level in natural water samples. Analytes were isolated from samples by solid-phase extraction and analysed both off-line and on-line by reversed-phase high-performance liquid chromatography with post-column derivatization and fluorimetric detection. Several SPE cartridges and eluents were evaluated; C₁₈ enrichment and elution with a mixture of methanol, acetic acid, and water was found most suitable. Preconcentration factors up to 250 can be achieved when a 500-mL sample is processed. Detection limits, recovery rates, and the precision of the whole process have been determined. The method has been applied to the determination of organotin species in spiked natural water samples collected on the NW Mediterranean coast. Recovery rates range from 75 to 110% and detection limits are at the low ng L⁻¹ level (1–3 ng Sn L⁻¹ for DPhT, DBT, and PhT and 40 ng Sn L⁻¹ for TBT when 250 mL spiked sea water is processed.)     

On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Antiparallel triple helices. Structural characteristics and stabilization by 8-amino derivatives

The structural, dynamical, and recognition properties of antiparallel DNA triplexes formed by the antiparallel d(G#G.C), d(A#A.T), and d(T#A.T) motifs (the pound sign and dot mean reverse-Hoogsteen and Watson-Crick hydrogen bonds, respectively) are studied by means of "state of the art" molecular dynamics simulations. Once the characteristics of the helix are defined, molecular dynamics and thermodynamic integration calculations are used to determine the expected stabilization of the antiparallel triplex caused by the introduction of 8-aminopurines. Finally, oligonucleotides containing 8-aminopurine derivatives are synthesized and tested experimentally using several approaches in a variety of systems. A very large stabilization of the triplex is found experimentally, as predicted by simulations. These results open the possibility for the use of oligonucleotides carrying 8-aminopurines to bind single-stranded nucleic acids by formation of antiparallel triplexes.     

Substituent effects in eight-electron electrocyclic reactions

The main features of transition structures associated with eight-electron electrocyclic reactions have been studied with Density Functional Theory. It is found that conrotatory electrocyclization reaction of (3Z,5Z)-octa-1,3,5,7-tetraenes takes place via M?bius aromatic transition structures of helical conformation. The reaction is completely periselective. In general, transition structures having outward substituents are preferred with respect to the inward transition structures, irrespective of the pi-donor or pi-acceptor character of the substituent. In contrast with four-electron thermal conrotatory electrocyclic reactions, there is no satisfactory correlation between the difference in energy of activation between inward and outward substituents and the Taft resonance sigma(R) parameter.