Precise control and consecutive modulation of spin transition temperature using chemical migration in porous coordination polymers

Precise control of spin transition temperature (T(c)) is one of the most important challenges in molecular magnetism. A Hofmann-type porous coordination polymer {Fe(pz)[Pt(II)(CN)(4)]} (1; pz = pyrazine) exhibited cooperative spin transition near room temperature (T(c)(up) = 304 K and T(c)(down) = 284 K) and its iodine adduct {Fe(pz)[Pt(II/IV)(CN)(4)(I)]} (1-I), prepared by oxidative addition of iodine to the open metal sites of Pt(II), raised the T(c) by 100 K. DSC and microscopic Raman spectra of a solid mixture of 1-I and 1 revealed that iodine migrated from 1-I to 1 through the grain boundary after heating above 398 K. We have succeeded in precisely controlling the iodine content of {Fe(pz)[Pt(CN)(4)(I)(n)]} (1-In; n = 0.0-1.0), which resulted in consecutive modulation of T(c) in the range 300-400 K while maintaining the hysteresis width. Furthermore, it was demonstrated that iodine migration in the solid mixture was triggered by the spin transition of 1-I. The magnetically bistable porous framework decorating guest interactive open-metal-site in the pore surface makes it possible to modulate T(c) ad arbitrium through unique postsynthetic method using iodine migration.     

Highly polar carbohydrates stack onto DNA duplexes via CH/π interactions

Carbohydrate-nucleic acid contacts are known to be a fundamental part of some drug-DNA recognition processes. Most of these interactions occur through the minor groove of DNA, such as in the calicheamicin or anthracycline families, or through both minor and major groove binders such as in the pluramycins. Here, we demonstrate that carbohydrate-DNA interactions are also possible through sugar capping of a DNA double helix. Highly polar mono- and disaccharides are capable of CH/π stacking onto the terminal DNA base pair of a duplex as shown by NMR spectroscopy. The energetics of the carbohydrate-DNA interactions vary depending on the stereochemistry, polarity, and contact surface of the sugar involved and also on the terminal base pair. These results reveal carbohydrate-DNA base stacking as a potential recognition motif to be used in drug design, supramolecular chemistry, or biobased nanomaterials.     

Determination of volatile nitrosamines in meat products by microwave-assisted extraction and dispersive liquid-liquid microextraction coupled to gas chromatography-mass spectrometry

Microwave-assisted extraction (MAE) and dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-mass spectrometry (GC-MS) were evaluated for use in the extraction and preconcentration of volatile nitrosamines in meat products. Parameters affecting MAE, such as the extraction solvent used, and DLLME, including the nature and volume of the extracting and disperser solvents, extraction time, salt addition and centrifugation time, were optimized. In the MAE method, 0.25g of sample mass was extracted in 10mL NaOH (0.05M) in a closed-vessel system. For DLLME, 1.5mL of methanol (disperser solvent) containing 20μL of carbon tetrachloride (extraction solvent) was rapidly injected by syringe into 5mL of the sample extract solution (previously adjusted to pH 6), thereby forming a cloudy solution. Phase separation was performed by centrifugation, and a volume of 3μL of the sedimented phase was analyzed by GC-MS. The enrichment factors provided by DLLME varied from 220 to 342 for N-nitrosodiethylamine and N-nitrosopiperidine, respectively. The matrix effect was evaluated for different samples, and it was concluded that sample quantification can be carried out by aqueous calibration. Under the optimized conditions, detection limits ranged from 0.003 to 0.014ngmL(-1) for NPIP and NMEA, respectively (0.12-0.56ngg(-1) in the meat products).     

Characterization of galactooligosaccharides derived from lactulose

Galactooligosaccharides are non-digestible carbohydrates with potential ability to modulate selectively the intestinal microbiota. In this work, a detailed characterization of oligosaccharides obtained by transgalactosylation reactions of the prebiotic lactulose, by using β-galactosidases of different fungal origin (Aspergillus oryzae, Aspergillus aculeatus and Kluveromyces lactis), is reported. Oligosaccharides of degree of polymerization (DP) up to 6 were detected and quantified by HPLC-ESI MS from a complex mixture produced by transgalactosylation reaction with A. oryzae (GOSLuAo), whereas only carbohydrates up to DP4 and DP5 were found for those obtained from the reaction with β-galactosidases from K. lactis (GOSLuKl) and A. aculeatus (GOSLuAa), respectively. Disaccharides (galactosyl-galactoses and galactosyl-fructoses) and trisaccharides were characterised in the three mixtures by GC-MS as their trimethylsilyl oximes. Galactosyl- and digalactosyl-glycerols were produced during the transgalactosylation reaction of lactulose with β-galactosidases from A. aculeatus and K. lactis, due to the presence of glycerol as enzyme stabiliser.     

OFFGEL isoelectric focusing and polyacrylamide gel electrophoresis separation of platinum-binding proteins

In this work a 2D electrophoretic separation procedure able to maintain the integrity of platinum-protein bonds has been developed. The method is based on the use of sequential OFFGEL isoelectric focussing (IEF) and PAGE. A systematic study of the reagents used for PAGE, for OFFGEL-IEF separation, and post-separation treatment of gels (such as enzymatic digestion and sample preparation for MS analysis) was tackled regarding their suitability for the identification of platinum binding proteins using standard proteins incubated with cisplatin. The distribution of platinum in high and low molecular weight fractions (separated by cut-off filters) was determined by ICP-MS, which allows evaluating platinum-protein bond stability under the conditions studied. SDS-PAGE in the absence of β-mercaptoethanol or dithiotreitol preserved the platinum-protein bonds. In addition, neither the influence of the electric field during the electrophoretic separation, nor the processes of fixing, staining and destaining of proteins in the gel did result in the loss of platinum from platinum binding proteins. SDS-PAGE under non-reducing conditions provides separation of platinum-binding proteins in very narrow bands with quantitative recoveries. Different amounts of platinum-bound proteins covering the range 0.3-2.0 μg were separated and mineralised for platinum determination, showing good platinum linearity. Limits of detection for a mixture of five standard proteins incubated with cisplatin were between the range of 2.4 and 13.9 pg of platinum, which were satisfactory for their application to biological samples. Regarding OFFGEL-IEF, a denaturing solution without thiourea and without dithiotreitol is recommended. The suitability of the OFFGEL-IEF for the separation of platinum binding proteins of a kidney cytosol was demonstrated.     

Directly suspended droplet microextraction with in injection-port derivatization coupled to gas chromatography-mass spectrometry for the analysis of polyphenols in herbal infusions, fruits and functional foods

A miniaturized liquid-phase extraction procedure based on directly suspended droplet microextraction is proposed for determining different classes of polyphenols. A derivatization reaction by means of in injection-port reaction with bis(trimethylsilyl)trifluoroacetamide is carried out to convert the polar non-volatile polyphenols into volatile derivatives. The separation and detection is carried out by coupling gas chromatography with mass spectrometry in the selected ion monitoring mode. The procedure uses undecanone, a low density organic solvent, and several factors influencing the extraction, collection efficiency and derivatization reaction are optimized. Excellent linearity was obtained for the range studied (0.05-500ngmL(-1)). The limits of detection are between 0.011 and 0.13ngmL(-1), depending on the compound, and the limits of quantification between 0.037 and 0.43ngmL(-1). The sensitivity and detection limits for polyphenols using the DSDME sample pretreatment method were very low. Enrichment factors are between 413 and 578. The recoveries obtained for spiked samples are satisfactory for all the compounds. The coupled miniaturized method is applied to the sensitive determination of both cis- and trans-resveratrol isomers, piceatannol, catechin, epicatechin, quercetin and fisetin in herbal infusions, fruits, juices and functional foods.     

Preparation of magnetic polymer particles with nanoparticles of Fe(0)

Iron nanoparticles (Fe(0)), were encapsulated into polymethyl methacrylate (PMMA), by means of emulsion polymerization techniques in a semicontinuous process. The final average diameter of the composite particle was calculated until three times of average particle of iron particles and were stabilized with a non-ionic surfactant. They were then characterized by scanning electron microscopy and dynamic light scattering. Their magnetic properties were determined by parallel field vibrating-sample magnetometry method. The results indicated that the magnetic properties are a function of polymer concentration in the nanocomposite particle.     

Wettability of carbon nanofiber layers on nickel foils

Carbon nanofiber (CNF) layers have been directly synthesized on nickel foils by chemical vapor deposition at 450°C using different H(2) concentrations and reaction times. The addition of 5% H(2) produces thicker, rougher and more porous CNF layers than when 1% H(2) is used. The roughness and porosity increases with reaction time when 5%, 10% or 20% H(2) are used; however, this effect is less pronounced when 1% H(2) is used. CNFs are 50-55 nm in diameter and have a fishbone type structure. We have studied the influence of CNF layer thickness, porosity and surface roughness on the interaction with water by measuring the contact angle. The water wetting properties of the samples are more significantly influenced by the CNF layer thickness than both surface roughness and porosity. When the CNF layer is thicker than ca. 20 μm, the surface is hydrophobic and the contact angle increases with surface roughness and porosity. When the CNF layer is thinner than ca. 20 μm, the surface is hydrophilic and the contact angle decreases with increasing surface roughness and porosity. This behavior is attributed to penetration of water, making contact with the hydrophilic C layer between the CNF layer and the foil.     

Synthesis and characterization of (smif)2M(n) (n = 0, M = V, Cr, Mn, Fe, Co, Ni, Ru; n = +1, M = Cr, Mn, Co, Rh, Ir; smif =1,3-di-(2-pyridyl)-2-azaallyl)

A series of Werner complexes featuring the tridentate ligand smif, that is, 1,3-di-(2-pyridyl)-2-azaallyl, have been prepared. Syntheses of (smif)(2)M (1-M; M = Cr, Fe) were accomplished via treatment of M(NSiMe(3))(2)(THF)(n) (M = Cr, n = 2; Fe, n = 1) with 2 equiv of (smif)H (1,3-di-(2-pyridyl)-2-azapropene); ortho-methylated ((o)Mesmif)(2)Fe (2-Fe) and ((o)Me(2)smif)(2)Fe (3-Fe) were similarly prepared. Metatheses of MX(2) variants with 2 equiv of Li(smif) or Na(smif) generated 1-M (M = Cr, Mn, Fe, Co, Ni, Zn, Ru). Metathesis of VCl(3)(THF)(3) with 2 Li(smif) with a reducing equiv of Na/Hg present afforded 1-V, while 2 Na(smif) and IrCl(3)(THF)(3) in the presence of NaBPh(4) gave [(smif)(2)Ir]BPh(4) (1(+)-Ir). Electrochemical experiments led to the oxidation of 1-M (M = Cr, Mn, Co) by AgOTf to produce [(smif)(2)M]OTf (1(+)-M), and treatment of Rh(2)(O(2)CCF(3))(4) with 4 equiv Na(smif) and 2 AgOTf gave 1(+)-Rh. Characterizations by NMR, EPR, and UV-vis spectroscopies, SQUID magnetometry, X-ray crystallography, and DFT calculations are presented. Intraligand (IL) transitions derived from promotion of electrons from the unique CNC(nb) (nonbonding) orbitals of the smif backbone to ligand π*-type orbitals are intense (ε ≈ 10,000-60,000 M(-1)cm(-1)), dominate the UV-visible spectra, and give crystals a metallic-looking appearance. High energy K-edge spectroscopy was used to show that the smif in 1-Cr is redox noninnocent, and its electron configuration is best described as (smif(-))(smif(2-))Cr(III); an unusual S = 1 EPR spectrum (X-band) was obtained for 1-Cr.     

Analysis of the nitrile and methyl torsional vibrations of n‐propyl cyanide in its S0 electronic state

This work presents a structural and vibrational theoretical study of n‐propyl cyanide as a function of the nitrile and methyl torsional modes. A potential energy hypersurface is built at the MP4(SDQ)/aug‐cc‐pVTZ//MP2/aug‐cc‐pVTZ theory level. The equilibrium structure is found in a gauche conformation. Another minimum is found for the trans form. The maximum appears in a cis conformation. For the first time, the interconversion barriers between the different forms are calculated. A two‐dimensional anharmonic vibrational Hamiltonian is built for the nitrile and methyl torsional modes. We find the vibrational energy levels to organize in two stacks associated to the gauche and trans forms. Fundamental frequencies of 113.12 and 220.54 cm^?1 are predicted for the nitrile and methyl torsions in the equilibrium, gauche, conformer. In addition, we find symmetry allowed transitions between the gauche and trans energy levels stacks. The lowest transition is predicted to appear at 24.49 cm^?1. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011