TTT Cure Diagram

Curing reactions of the epoxy system consisting of a diglycidyl ether of bisphenol A (BADGE n=0) and m-xylylenediamine (m-XDA) were studied to calculate time-temperature-transformation (TTT) isothermal cure diagram for this system. Gel times were measured as a function of temperature using solubility test. Differential scanning calorimetry (DSC) was used to calculate the vitrification times. DSC data show a one-to-one relationship between T _g and fractional conversion, a independent of cure temperature. As a consequence, T _g can be used as a measure of conversion. The activation energy for the polymerization overall reaction was calculated from the gel times obtained using the solubility test (41.5 kJ mol^-1). This value is similar to the results obtained for other similar epoxy systems. Isoconversion contours were calculated by numerical integration of the best fitting kinetic model. This revised version was published online in July 2006 with corrections to the Cover Date.     

Crystallization kinetic studies: A means to evaluate time-temperature-transformation curves. Application to metallic glasses

It is shown that the study of the kinetics of crystallization of an amorphous alloy may be used to obtain the correct form of the low temperature part of the time-temperature-transformation (T-T-T) curves. A unified review of the current kinetics of crystallization studies is presented and the general kinetic equation which gives the reaction rate as a function of temperature and crystalline fraction is shown to contain information related to theT-T-T-curves. Finally examples of application to two metallic glasses, Nd₃Fe₇₇B₂₀ and Fe_67.5Co₁₅Nb_1.5B₁₆, obtained by rapid solidification techniques are presented. The comparison between theory and experiment is satisfactory.

---

Zusammenfassung Es wird gezeigt, daß die Untersuchung der Kristallisationskinetik von amorphen Legierungen genutzt werden kann, die korrekte Form des Niedertemperaturbereiches der Zeit-Temperatur-Transformation (T-T-T) Kurven zu erhalten. Es wird ein einheitlicher Überblick über die jüngsten Untersuchungen von Kristallisationskinetiken gegeben und an der allgemeinen Gleichung der Reaktionsgeschwindigkeit als eine Funktion von Temperatur und Kristallanteil wird gezeigt, daß sie Informationen bezüglich der T-T-T-Kurven beinhaltet. Letztlich wird eine Anwendung an zwei, durch schnelles Erstarren gewonnenen metallischen Gläsern Nd₃Fe₇₇B₂₀ und Fe_67.5Co₁₅Nb_1.5B₁₆ dargelegt. Zwischen Theorie und Praxis konnte eine ausreichende Übereinstimmung festgestellt werden.

---

---

Dedicated to Professor Dr. H. J. Seifert on the occasion of his 60^th birthday

---

This work was supported by the Comision Interdepartamental de Cienca y Tecnologia, CICYT (project No. MAT88-0439) which are acknowledged.     

A re-statement of the Hohenberg–Kohn theorem and its extension to finite subspaces

Bearing in mind the insight into the Hohenberg–Kohn theorem for Coulomb systems provided recently by Kryachko (Int J Quantum Chem 103:818, 2005), we present a re-statement of this theorem through an elaboration on Lieb’s proof as well as an extension of this theorem to finite subspaces. Contribution to the Serafin Fraga Memorial Issue.     

Structural basis for recognition of bacterial cell wall teichoic acid by pseudo-symmetric SH3b-like repeats of a viral peptidoglycan hydrolase

Endolysins are bacteriophage-encoded peptidoglycan hydrolases targeting the cell wall of host bacteria via their cell wall-binding domains (CBDs). The molecular basis for selective recognition of surface carbohydrate ligands by CBDs remains elusive. Here, we describe, in atomic detail, the interaction between the Listeria phage endolysin domain CBD500 and its cell wall teichoic acid (WTA) ligands. We show that 3′O-acetylated GlcNAc residues integrated into the WTA polymer chain are the key epitope recognized by a CBD binding cavity located at the interface of tandem copies of beta-barrel, pseudo-symmetric SH3b-like repeats. This cavity consists of multiple aromatic residues making extensive interactions with two GlcNAc acetyl groups via hydrogen bonds and van der Waals contacts, while permitting the docking of the diastereomorphic ligands. Our multidisciplinary approach tackled an extremely challenging protein–glycopolymer complex and delineated a previously unknown recognition mechanism by which a phage endolysin specifically recognizes and targets WTA, suggesting an adaptable model for regulation of endolysin specificity.

Combining genetic, biochemical and computational approaches, we elucidated the molecular mechanisms underlying the recognition of Listeria wall teichoic acid by bacteriophage-encoded SH3b repeats.     

Bead injection for surface enhanced Raman spectroscopy: automated on-line monitoring of substrate generation and application in quantitative analysis

The technique of bead injection has been adapted for surface enhanced Raman scattering (SERS) to substantially improve precision, long term stability and sensitivity of SERS detection in analytical chemistry. For this purpose a fully automated flow system comprising a dedicated flow-cell has been developed and tested. With the developed flow-cell, which contains two inlet and two outlet channels, it is possible to retain, perfuse and discharge minute amounts of polymer beads while monitoring all steps by Raman spectroscopy. First, beads carrying cation exchanger moieties were retained in the flow-cell and subsequently perfused with a silver nitrate and a hydroxylamine solution using one inlet of the flow cell. By this sequence homogeneous SERS active silver layers were formed on the beads. The uniformity of the achieved silver layer was studied by secondary electron microscopy. For measurement, the analyte was then introduced from the second inlet channel such that the interaction between the activated SERS beads and analyte occurred in close proximity and within the focus of the laser excitation beam. Due to the complete computer control of all experimental steps, including bead entrapment, SERS layer generation, sample introduction and final bead removal, highly reproducible conditions for SERS were achieved. The method was developed using 9-aminoacridine as a test molecule. Quantitative studies were carried out for 9-aminoacridine and acridine showing linear calibrations from 1-100 nmol l(-1) and 50-1,000 nmol l(-1), respectively, using a sample volume of 200 microl each. Typical relative standard deviations were 4.7% for 9-aminoacrine and 5.8% for acridine.     

Preliminary characterization of anhydrous ethanol used in Brazil as automotive fuel

This work reports preliminary studies on the characterisation of anhydrous ethanol (AEA) used as an automotive fuel mixed with gasoline in Porto Alegre (South Brazil). Pre-concentration of the impurities contained in 1000 ml of AEA was carried on through solid-phase extraction using XAD4 resin. The main compounds in the extract were identified by means of spectral data from the library of the equipment. The concentrate was then fractionated using a preparative liquid chromatographic column filled with activated silica gel and the elution procedure was carried out with, n-hexane, n-hexane-benzene (1:1, v/v) and dichloromethane. Prior to analysis by GC-MS, each fraction was reduced to 1 ml with a gentle stream of nitrogen. Saturated linear hydrocarbons and aromatic hydrocarbons eluted in the first fraction and oxygenated compounds such as aldehydes. ketones and alcohols, eluted in the second one. were the main compounds detected in the sample.     

Comparative voltammetric study of 2,4-dinitrophenol (DNP), albumin and DNP-albumin as an analytical approach to the use of DNP as a universal label in immunoelectrochemical assays

A comparative electrochemical study of 2,4-dinitrophenol (DNP), albumin and DNP-albumin has been carried out at a hanging mercury drop electrode, in order to use DNP as a universal label in immunoelectrical assays. Several electrochemical techniques have been used. Differential pulse voltammetry has proved to be the most suitable. Wide dynamic linear ranges (more than three orders of magnitude for DNP-albumin) and low detection limits have been achieved (5 x 10(-10)M, 2 x 10(-10)M, 3 x 10(-12)M for DNP, albumin and DNP-albumin, respectively). Good reproducibility has been obtained in all cases (R.S.D. < 2.2%).