New diorganotin(IV) derivatives of 7-hydroxycoumarin (umbelliferone) and their adducts with 1,10-phenanthroline

New diorganotin(IV) derivatives of the general formula R2Sn(Umb)2 (where R = n-Bu, n-Oct and Ph; Umb = umbelliferone anion) have been synthesized either by the reaction of R2SnO with umbelliferone under azeotropic removal of water or by the reaction of R2SnCl2 with sodium salt of umbelliferone. Further, the adducts of the general formula R2Sn(Umb)2.phen (where R = n-Bu and n-Oct; phen = 1,10-phenanthroline) have also been synthesized by the interaction of R2Sn(Umb)2 with 1,10-phenanthroline. The bonding and coordination behavior in these derivatives are discussed on the basis of IR and 119Sn M?ssbauer spectroscopic studies in solid state. Their coordination behavior in solution is discussed by the multinuclear (1H, 13C and 119Sn) NMR spectral studies. The M?ssbauer and IR studies indicate that umbelliferone acts as a monoanionic bidentate ligand in R2Sn(Umb)2 coordinating through O(7) and O(1). A distorted octahedral geometry around tin has been proposed for R2Sn(Umb)2 as well as for R2Sn(Umb)2.phen in solid state. The newly synthesized derivatives have been tested for their anti-inflammatory and cardiovascular activities. The average LD50 value >1000 mg kg(-1) of these compounds indicates their safety margin.     

Vibrational dephasing and hydrodynamic effects on vibrational relaxation rates in acetophenone: Raman bandshape analysis

The isotropic component of Raman band for C=O stretching mode of acetophenone in solution was analyzed by estimating the correlation coefficient with reference to Lorentzian lineshape. In the intermediate region of solute/solvent concentration there is a sharp decrease in the correlation coefficient and there appears to be a transition from non-Lorentzian to Lorentzian lineshape. The vibrational relaxation rates have been estimated from the isotropic component of Raman band in different solvents. The rate is shown to be dependent on several macroscopic as well as microscopic properties of the solute-solvent system and intermolecular interactions. The hydrodynamic and dispersion forces appear to play a major role in determining the vibrational relaxation rate and the broadening of the bands.     

Solvent dependent analysis of isotropic Raman band shape of C=O stretching vibration

The isotropic Raman band shape corresponding to C=O stretching vibration of some molecules has been studied in neat liquids and as a function of solvent concentration using both polar and non-polar solvents. The Raman band shape was analyzed on the basis of correlation with the Lorentzian line shape by employinga simple method of linear curve fitting. In neat liquids and in low solvent concentration region, the band shape was found to be non-Lorentzian. With the gradual increase in solvent concentration the band shape approaches a Lorentzian function. The plot of the correlation coefficient for a Lorentzian shape shows a discontinuity in the intermediate range of solvent concentration. The influence of the structural characteristics of the solute and the solvent systems on the reference mode and various multipolar interactions together with the time varying spatial distribution of solvent molecules with respect to the reference molecule are expected to govern the microenvironmental fluctuations. This may be responsible for the discontinuity in the intermediate solvent concentration region.     

Bis-salicylaldehyde-ethylenediamine as an analytical reagent

Summary Copper has been determined gravimetrically as its bis-salicylaldehyde-ethylenediamine complex of the composition C₁₆H₁₄O₂N₂ · Cu, dried at 100–120° C. The complex is completely precipitated in theph range of 10.5–13.5, adjusted with ammonia or caustic alkali. It is stable in presence of excess ammonia, 0.1 N alkali, ammonium salts and complexing agents as tartrate, citrate, sodium-thiosulphate, fluoride, thiourea, triethanolamine and EDTA. In presence of tartrate and ammonia the ions of alkali metals, alkaline earths, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ and anions as VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3–, AsO₄ ^3– do not interfere. Ni²⁺ and Hg²⁺ are masked by tartrate, EDTA and ammonia; As³⁺, Sb³⁺ and Sn²⁺ are separated using fluoride as the complexing agent; at an alkalinity of 0.1 N caustic alkali in presence of tartrate As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ and Fe³⁺ are separated. Fe³⁺ can also be separated using triethanolamine as the masking agent at aph of about 13.0. Copper can be separated from almost all the ions, thus affording a highly selective method for the determination of copper.

---

Zusammenfassung Es wird eine gravimetrische Methode zur Bestimmung von Kupfer beschrieben, die auf der Bildung des Bis-salicylaldehyd-äthylendiaminkomplexes beruht. Dieser hat die Zusammensetzung C₁₆H₁₄O₂N₂ · Cu. Die Fällung wird imph-Bereich 10,5–13,5 (mit Ammoniak oder Alkalilauge eingestellt) vorgenommen und der Niederschlag bei 100°–120° C getrocknet. Der Komplex ist beständig in Gegenwart von überschüssigem Ammoniak, 0,1 n Alkali, Ammoniumsalzen sowie Tartrat, Citrat, Natriumthiosulfat, Fluorid, Thioharnstoff, Triäthanolamin und ÄDTA. In Gegenwart von Tartrat und Ammoniak stören nicht: Alkalien, Erdalkalien, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ sowie VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3– und AsO₄ ³⁺. Ni²⁺ und Hg²⁺ können mit Tartrat, ÄDTA und Ammoniak maskiert werden, As³⁺, Sb³⁺ und Sn²⁺ mit Fluorid. In 0,1 n ätzalkalischer Lösung in Gegenwart von Tartrat können As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ und Fe³⁺ abgetrennt werden. Fe³⁺ kann ebenfalls mit Triäthanolamin beiph 13,0 maskiert werden. Das beschriebene Verfahren erlaubt somit eine Abtrennung des Kupfers von fast allen anderen Ionen.

---

---

Part I: Singh, B. R., and S. Kumar: Z. analyt. Chem. 185, 211 (1962).     

Kinetic studies on the acid catalyzed reaction of hydroxamic acids in β-cyclodextrin/surfactant mixed systems

The acid catalyzed hydrolysis of two N-substituted hydroxamic acids (C₆H₅CON(OH)R, R = C₆H₅ (PBHA), R = C₆H₅CH₂(BBHA)) in mixed systems containing -cyclodextrin (—CD) and a surfactant (sodium dodecyl sulfate, SDS) has been studied. The reactions are inhibited by —CD. The inhibition is attributed to the formation of inclusion complex and competition between the micellization and complexation processes.This revised version was published online in December 2005 with corrections to the Cover Date.     

Nonlinear evolution of thin liquid films dewetting near soft elastomeric layers

The nonlinear evolution of thin liquid films dewetting near soft elastomeric layers is examined in this work. Evolution equations are derived by applying the lubrication approximation and assuming that van der Waals forces in the liquid cause the dewetting and that the solid can be described as a linear viscoelastic material. Two cases are examined: (i) a liquid layer resting on an elastomer bounded from below by a rigid substrate, and (ii) an elastomer overlying a thin liquid film bounded from below by a rigid substrate. Linear stability analysis is carried out to obtain asymptotic relations which are then compared against solutions of the full characteristic equations. In the liquid-on-solid case, numerical solutions of the evolution equations show that van der Waals forces cause thinning of the liquid film and thickening of the elastomeric solid beneath film depressions. Inclusion of a short-range repulsive force suggests that regular patterns may form in which ridges of fluid rest on depressions in the solid. In the solid-on-liquid case, the van der Waals forces cause the solid layer to break up before the liquid film can dewet. The results presented here support the idea that the dewetting of thin liquid films might be exploited to create topographically patterned surfaces on soft polymeric solids.     

On the optical properties of the imidazolium ionic liquids

Room-temperature ionic liquids, particularly those based on substituted imidazolium cations, are currently being extensively studied for a variety of applications. Herein, we explore the suitability of several imidazolium salts in optical applications by carefully examining the electronic absorption and fluorescence behavior of these substances, generally believed to be transparent in most of the UV region and fully transparent in the visible region. It is shown that all imidazolium ionic liquids are characterized by significant absorption in the entire UV region and a long absorption tail that extends into the visible region. These absorption characteristics are attributed to the imidazolium moiety and its various associated structures. When excited in the UV or early part of the visible region, these liquids exhibit fluorescence, which covers a large part of the visible region and shows dramatic excitation wavelength dependence. The excitation wavelength dependent shift of the fluorescence maximum has been rationalized taking into consideration the existence of the various associated structures of the ionic liquids and the inefficiency of the excitation energy-transfer process between them. The results imply that these liquids may have serious drawbacks in some of the optical studies.     

Polymerization initiated by ylide: Polymerization of ethyl methacrylate with the use of 4-picolinium p-chloro phenacylide as initiator

The ylide 4-picolinium, p-chloro phenacylide-initiated thermal polymerization of ethyl methacrylate (EMA) was studied. 4-Picolinium p-chloro phenacylide induces the thermal polymerization of ethyl methacrylate at 65°C. The rate of polymerization (R_p) rose as the initiator concentration increased from 2 × 10^?3 to 4 × 10^?3 M and the initiating exponent was computed as 1.9. The R_p decreased as the concentration of ylide increased from 6 × 10^?2 to 1M. The greater initiator concentration also affected the molecular weight inversely. The polymerization was carried out at different temperatures and the overall activation energy was computed as 4.08 Kcal/mol. Polymerization was inhibited in the presence of hydroquinone as a radical scavenger. Kinetic studies and other data show that the overall polymerization takes place in a radical mechanism. The various kinetic parameters, such as the rate and average degree of polymerization, molecular weight, and energy of activation of the present system, were evaluated.     

Lead-selective membrane electrodes based on dithiophenediazacrown ether derivatives

Three double-armed diazacrown ethers with two thiophene side groups, 7,16-dithenyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTDC), 7,16-dithenoyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTODC), and 7,16-di-(2-thiopheneacetyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTAODC), have been synthesized and used as novel neutral lead(II) ionophores in ion selective electrode applications. The relationship between the molecular structure of these ionophores and electrochemical properties (linear range, response time, selectivity) of the membrane electrode is discussed. The optimum conditions for the preparation of the electrodes are described. The optimized dithenoyldiazacrown had a detection limit of pPb = 5.7, and Nernstian range with slope 29.2 mV decade⁻¹ from pPb = 5.0 to 2.7. Mercury and silver ions are the major interferences. These electrodes are applied to potentiometric titrations of lead(II) ions and show promise for the determination of lead ions in water samples.     

A new bifunctional catalyst for tandem Heck-asymmetric dihydroxylation of olefins

A new bifunctional catalyst consisting of active palladium and osmium species anchored on silica gel through a mercaptopropyl spacer and a cinchona alkaloid respectively has been prepared for the first time and used in the heterogeneous tandem Heck-asymmetric dihydroxylation of olefins to afford diols with excellent yields and enantiomeric excesses (ee's) in presence of N-methylmorpholine N-oxide or K3Fe(CN)6 as cooxidants.