双波长薄层紫外可见光谱电化学测定多巴胺

多巴胺 (DA)和抗坏血酸 (AA)的吸收光谱在 2 0 0～ 30 0nm内重叠严重 ,但在电化学氧化状态下 ,DA的氧化产物在 2 10 ,30 0和 4 80nm有强吸收峰 ,AA的氧化产物在 2 0 0～ 4 0 0nm范围内吸收较弱且呈光滑平缓的斜坡。在此基础上 ,利用自行设计的长光程薄层光谱电化学池建立了一种双波长光谱电化学法测定DA。测定条件为 pH 6 .2的磷酸盐缓冲液 (PBS) ,0 .6V (vs.Ag/AgCl)电极电位 ,双波长 318/ 2 93nm ,线性范围为 4 .0× 10 - 6 ～ 2 .0× 10 - 4mol·L- 1,检出限为 2 .0×10 - 6 mol·L- 1。对 6 .2 0× 10 - 5mol·L- 1DA进行 11次平行测定 ,平均相对偏差为 2 .6 %。与文献报道的吸光光度法相比 ,该法具有较高的灵敏度和选择性 ,较为有效地消除了AA的干扰 ,回收率在 91.8%～ 10 0 .8%之间 ,结果满意     

微波固相法合成钠快离子导体Na5YSi4O12

应用微波方法合固相反应难于制备的Ｎａ５ＹＳｉ４Ｏ１２纯相，讨论了微波合成条件对产物的影响，与溶胶－凝胶法相比，微波法反应速率快，选择性强，合成的样品具有特异的聚集态，缺陷和微结构，从而导致离子导电活化能下降。     

颗粒性甲烷单加氧酶的电子供体研究

从甲基弯菌M ethylosinus trichosporium IMV3011的膜中分离出颗粒性甲烷单加氧酶（Particulate MMO,Pmmo）t和NADH脱氢酶，只有当两者同时存在，并添加去垢剂解离膜组分时，NDAH才能为pMMO提供还原当量，对苯二酚能够在整细胞和膜水平代替NADH作为PMMO的电子供体，对于纯化的PMMO，对苯二分配仍是有效的电子供体，而NADH却是无效的电子供体。在NADH脱氢酶存在下，NADH可将对苯醌还原为对苯二酚，纯化过程中，采用对苯二酚作为PMMO活性分析时的电子供体，不必共纯化NADH脱氢酶，且有利于对PMMO活性中心进行深入研究。     

热重质谱联用(TG/MS)系统的建立和应用

将两种商品型分析仪器热重（TG）和质谱（MS）联用，并将这一热重质谱联用系统（TG／MS）应用于含酚废水的催化氧化和煤燃烧的过程研究，在获取样品重量变化的同时对逸出气相产物进行了在线检测，获取了苯酚氧化反应的历程和煤燃烧过程中氮、硫氧化物的逸出信息。     

Angiopoietin-1基因修饰的骨髓间充质干细胞(MSC)的蛋白质组学方法分析

血管生成素(angiopoietin,Ang)是近来发现的促血管生成的细胞因子,其家族成员包括Angl、Ang2、Ang3、Ang4.     

非晶聚对苯二甲酸乙二醇酯薄片在低温退火过程中的声发射现象

Acoustic emission during sub-Tg annealing fort amorphous polyethylene terephthalate (PET) sheet quenched from melt has been observed. The mechanical properties, texture and glass transition of annealed specimens have been studied. It is shown that some of PET chains change from non-equilibrium state to equilibrium state during sub-Tg annealing, which leads to stress concentration in specimen. When the level of internal stress approaches to the limit, the acoustic waves are emitted due to sudden releasing of stress and the micro-defects are for-med. This is one of the important reasons,the causes the loss of mechanical properties to an-nealed specimens.     

不同水煤浆分散剂与煤之间的相互作用规律研究Ⅹ分散剂在煤粒表面上的吸附作用特征

研究了6种水煤浆分散剂在14种不同变质程度煤上的吸附作用特征。结果表明,多数分散剂在煤粒表面达到单层饱和吸附后,又形成多层吸附,单层饱和吸附量与煤的变质程度、比表面积以及分散剂的性质有关。在相同粒度分布下,煤的变质程度越低,表面含氧亲水官能团的比例越高,孔隙率越高,比表面积越大,这对增大吸附量有利。煤的变质程度越高,其表面疏水区面积的比例越高,分散剂通过疏水基团紧密吸附在煤表面的比例越大,这对增加高阶煤的吸附量有利。对不同煤,是变质程度还是比表面积为吸附分散剂的主控因素,主要依赖于分散剂的结构与性质。对同种煤,疏水与亲水基团呈线型分立分布的分散剂,吸附量明显高;而疏水与亲水基团呈线型间隔分布的分散剂,吸附量明显小。     

Bentone-34/OV-1毛细管柱的研制及其分离性能

自行研制了Bentone-34/OV-1高效石英毛细管气相色谱柱,并利用该柱分别对二甲苯、二氯苯和二氯甲苯异构体3种体系进行分析.在选用的色谱条件下,难分离物质对二甲苯和间二甲苯分离度达3;间二氯苯和对二氯苯分离度达1 3.结果表明该柱具有分离效果好,分析速度快的优点.     

QSAR Studies on the COX-2 Inhibition by 3,4-Diarylcycloxazolones Based on MEDV Descriptor

Selective inhibition of cyclooxygenase-2 (COX-2) might avoid the side effects of current available nonsteroidal antiinflammatory drugs while retaining their therapeutic efficacy. A novel variable selection and modeling method based on prediction is developed to construct the quantitative structure-activity relationships (QSAR) between the molecular electronegativity distance vector (MEDV) based on 13 atomic types and the biological activities of a set of selective cyclooxygenase-2 inhibitory molecules, 3,4-diarylcycloxazolones (DAA) plus indomethacin,naproxen, and celecoxib. Using multiple linear regression, a 5-variable linear model is developed with the calibrated correlation coefficient of 0.9271 and root mean square error of 0.17 in modeling stage and the validated correlation coefficient of 0.9030 and root mean square error of 0.20 in leave-one-out validation step, respectively. To further test the predictive ability of the model, 20 DAA compounds are picked up to construct a training set which is used to build a QSAR model and then the model is employed to predict the biological activities of the balance compounds. The predicted correlation coefficient and root mean square error are 0.9332 and 0.19, respectively.     

Thermal analysis of PMMA/gel silica glass composites

Thermal analysis of poly-methylmethacrylate (PMMA) impregnated porous gel silica glasses confirms that the PMMA chains form hydrogen bonds with the pore surface silanol groups. The adopted conditions for the insitu polymerisation result in about 4% of residual monomers trapped in the polymer, most of them in the amorphous structure. The polymer and monomer mixture takes up the whole of the free pore volume. Most of the residual monomer polymerises during the DSC scans above the glass transition temperature providing an excellent probe for the weak glass transition. Polymerisation in the gel silica glass medium affects the glass transition temperature, the length of polymer chains, and the degree of polymerisation.