Angiopoietin-1基因修饰的骨髓间充质干细胞(MSC)的蛋白质组学方法分析

血管生成素(angiopoietin,Ang)是近来发现的促血管生成的细胞因子,其家族成员包括Angl、Ang2、Ang3、Ang4.     

非晶聚对苯二甲酸乙二醇酯薄片在低温退火过程中的声发射现象

Acoustic emission during sub-Tg annealing fort amorphous polyethylene terephthalate (PET) sheet quenched from melt has been observed. The mechanical properties, texture and glass transition of annealed specimens have been studied. It is shown that some of PET chains change from non-equilibrium state to equilibrium state during sub-Tg annealing, which leads to stress concentration in specimen. When the level of internal stress approaches to the limit, the acoustic waves are emitted due to sudden releasing of stress and the micro-defects are for-med. This is one of the important reasons,the causes the loss of mechanical properties to an-nealed specimens.     

不同水煤浆分散剂与煤之间的相互作用规律研究Ⅹ分散剂在煤粒表面上的吸附作用特征

研究了6种水煤浆分散剂在14种不同变质程度煤上的吸附作用特征。结果表明,多数分散剂在煤粒表面达到单层饱和吸附后,又形成多层吸附,单层饱和吸附量与煤的变质程度、比表面积以及分散剂的性质有关。在相同粒度分布下,煤的变质程度越低,表面含氧亲水官能团的比例越高,孔隙率越高,比表面积越大,这对增大吸附量有利。煤的变质程度越高,其表面疏水区面积的比例越高,分散剂通过疏水基团紧密吸附在煤表面的比例越大,这对增加高阶煤的吸附量有利。对不同煤,是变质程度还是比表面积为吸附分散剂的主控因素,主要依赖于分散剂的结构与性质。对同种煤,疏水与亲水基团呈线型分立分布的分散剂,吸附量明显高;而疏水与亲水基团呈线型间隔分布的分散剂,吸附量明显小。     

Bentone-34/OV-1毛细管柱的研制及其分离性能

自行研制了Bentone-34/OV-1高效石英毛细管气相色谱柱,并利用该柱分别对二甲苯、二氯苯和二氯甲苯异构体3种体系进行分析.在选用的色谱条件下,难分离物质对二甲苯和间二甲苯分离度达3;间二氯苯和对二氯苯分离度达1 3.结果表明该柱具有分离效果好,分析速度快的优点.     

QSAR Studies on the COX-2 Inhibition by 3,4-Diarylcycloxazolones Based on MEDV Descriptor

Selective inhibition of cyclooxygenase-2 (COX-2) might avoid the side effects of current available nonsteroidal antiinflammatory drugs while retaining their therapeutic efficacy. A novel variable selection and modeling method based on prediction is developed to construct the quantitative structure-activity relationships (QSAR) between the molecular electronegativity distance vector (MEDV) based on 13 atomic types and the biological activities of a set of selective cyclooxygenase-2 inhibitory molecules, 3,4-diarylcycloxazolones (DAA) plus indomethacin,naproxen, and celecoxib. Using multiple linear regression, a 5-variable linear model is developed with the calibrated correlation coefficient of 0.9271 and root mean square error of 0.17 in modeling stage and the validated correlation coefficient of 0.9030 and root mean square error of 0.20 in leave-one-out validation step, respectively. To further test the predictive ability of the model, 20 DAA compounds are picked up to construct a training set which is used to build a QSAR model and then the model is employed to predict the biological activities of the balance compounds. The predicted correlation coefficient and root mean square error are 0.9332 and 0.19, respectively.     

Aggregation of sodium 1-(n-alkyl)naphthalene-4-sulfonates in aqueous solution: micellization and microenvironment characteristics

In aqueous solution, the micellization and microenvironment characteristics of the micelle assemblies of three anionic surfactants, sodium 1-(n-alkyl)naphthalene-4-sulfonates (SANS), have been investigated by steady-state fluorescence and time-resolved fluorescence decay techniques using pyrene, Ru(bpy)3(2+), and 1,6-diphenyl-1,3,5-hexatriene as fluorescence probes. The critical micelle concentrations (cmc's), effective carbon atom numbers (neff's), hydrophilic-lipophilic balances (HLBs), mean micelle aggregation numbers, micropolarities, and microviscosities of these surfactant micelles have been determined. The logarithmic cmc of the alkylnaphthalene sulfonates decreases linearly with an increase in the neff. The logarithmic aggregation number of the alkylnaphthalene sulfonates increases linearly with an increase in the neff. However, in contrast to the alkylsufonates and the alkylbenzene sulfonates, the aggregation for these alkylnaphthalene sulfonate molecules is less sensitive to the increase in the neff. The micropolarity of these alkylnaphthalene sulfonate micelles is less sensitive to the increase in the alkyl chain length and is lower than that of sodium dodecyl sulfate (SDS). The microviscosity of these alkylnaphthalene sulfonate micelles increases with an increase in the alkyl chain length and is lower than those of nonionic surfactants and zwitterionic surfactants. These results suggest that naphthyl rings have a notable effect on the micellization of SANS.     

超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查染发剂中32种染料成分

建立了超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查和分析染发剂中32种禁限用染料的分析方法。样品经甲醇-2 g/L抗坏血酸水溶液溶解提取,正己烷净化,用ZORBAX Eclipse Plus C_(18)(3.0 mm×100 mm,1.8μm)色谱柱分离,以甲醇-5 mmol/L乙酸铵水溶液为流动相进行梯度洗脱,采用正、负离子切换同时测定了32种染料成分,显著提高了检测通量。以全扫描模式下提取的保留时间和一级母离子精确质量数以及同位素丰度比,实现对染发剂中多种染料成分的快速筛查;以自动触发采集的二级碎片离子精确质量数进行确证。32种染料在相应的质量浓度范围内线性关系良好,相关系数(r~2)均大于0.99;定量下限(LOQ)为0.2～40μg/g,回收率为81.0%～110%,相对标准偏差(RSD)为3.3%～9.9%。该方法简单、准确、快速,适用于染发剂中多种禁限用染料成分的高通量快速定性筛查和定量分析。     

纳米金刚石粉酸处理前后性能结构的表征

自从1963年爆炸法合成纳米金刚石[1]以来,纳米金刚石已在科研和工业领域得以广泛应用.但是工业合成的纳米金刚石粉由于其工艺的限制存在一些杂质,其中主要包括纳米石墨、非晶碳和爆炸过程中产生的金属离子.因此,在实际科研工作前对纳米金刚石粉进行纯化处理就显得十分重要,以往的研究表明不同的处理方法各有利弊[2].在以下的研究中,我们采用盐酸消解的方法对商业购买的纳米金刚石粉进行纯化处理,通过对比纯化处理前后的IR、Raman以及ICP表征,分析讨论了酸处理方法的纯化效果.     

Bola型阴离子表面活性剂与溴化十二烷基三乙铵混合体系的表面性质与聚集行为

研究了具有简单结构的bola型阴离子表面活性剂二十酸二钠（C_(20)Na_2)与 阳离子型普通表面活性剂溴化十二烷基三乙铵（C_(12)Et_3）混合体系的表面性质 ，发现混合体系的cmc和γ_(cmc)比C_(12)Et_3单一体系未有显著降低。以负染色 ，FF-TEM，动态光散射（DLS）及粘度方法研究了混合体系的聚集行为，发现混合 体系中同时形成球形囊泡和管状聚集体，提出了产生这种聚集行为的机制。     

Studies of synergism for lowering dynamic interfacial tension in sodium alpha-(n-alkyl) naphthalene sulfonate/alkali/acidic oil systems

Alkylnaphthalene sulfonates with high purity were selected as model components to research synergism for lowering interfacial tension (IFT) in surfactant/alkali/acidic oil systems. The dynamic IFTs between alkylnaphthalene sulfonates with different alkyl chain length and n-decane, oleic acid model oil, or Shengli crude oil were measured. The results showed that the alkylnaphthalene sulfonates with different alkyl chain lengths had different synergism with different acidic components and their ionized acids under the same conditions. The synergism for lowering dynamic IFT in alkylnaphthalene sulfonate/alkali/acidic oil systems was controlled by alkylnaphthalene sulfonate concentration, alkyl chain length, alkali concentration, alkali type, and oleic acid concentration: optimal physicochemical conditions were necessary to the best synergism. This indicates that the synergism among added surfactant acidic components in crude oil and their ionized acids is controlled by the ratio of their interfacial concentrations.