A fast method to measure the thickness of removed layer from etching of SSNTD based on EDXRF

Solid state nuclear track detectors are commonly used for measurements of concentrations of radon gas and/or radon progeny. All these measurements depend critically on the thickness of the removed layer during etching. However, the thickness of removed layer calculated using the etching period does not necessarily provide a sufficiently accurate measure of the thickness. For example, the bulk etch rate depends on the strength of stirring during etching for the LR 115 detector. We propose here to measure the thickness of the removed layer by using energy-dispersive X-ray fluorescence spectrometry. In the present work, a reference silver nitrate pellet is placed beneath the LR 115 detector, and the fluorescence X-ray intensity for silver is then measured. We have found a linear relationship between the X-ray intensity and the thickness of the removed layer for LR 115 detector. This provides a fast method to measure the thickness of removed layer from etching of LR 115 detector. However, this method was found to be inapplicable for the CR-39 detector. Therefore, alternative methods have yet to be explored for the CR-39 detector.     

碱蓝6B共振光散射法检测DNA

研究了碱蓝 6B与脱氧核糖核酸在酸性条件下共振光散射特征 ,考察了影响因素和最佳反应条件 ,建立了一种测定纳克级DNA的方法。在四硼酸钠 盐酸 (pH =2 90 )缓冲溶液中 ,线性范围为 10～ 10 0 4 μg·L- 1 ,相关系数为 0 9913,检出限为 4 2 μg·L- 1 ,用于合成样品的测定结果令人满意。     

Volumetric and infrared measurements on amorphous ice structure

We have simultaneously used adsorption isotherm volumetry and Fourier transform infrared spectroscopy in order to take the investigations on amorphous ice structure a step further, especially concerning porosity and annealing-induced modifications. We have studied surface reorganization during annealing and found that the number of surface sites decreases before crystallization, their relative ratios being different for amorphous and crystalline ice. We also present results confirming that ice can have a large specific surface area and nevertheless be non-microporous.     

Mid-infrared generation based on a periodically poled LiNbO3 optical parametric oscillator

We report a nanosecond Nd:YVO_4-pumped optical parametric oscillator (OPO) based on periodically poled LiNbO_3 (PPLN). Tuning is achieved in this experiment by varying the temperature and period of the PPLN. The design of double-pass singly resonant oscillator (DSRO) and confocal cavity enables the OPO threshold to be lowered considerably, resulting in a simple, compact, all-solid-state configuration with the mid-infrared idler powers of up to 466mW at 3.41μm.     

Characterizations of Tb:Zn2SiO4 films on silicon wafer prepared by sol-gel dip-coating and solid-phase reaction

Terbium-doped Zn_2SiO_4 films were successfully prepared on Si wafers by a simple sol-gel dip-coating and solid-phase reaction method of ZnO and SiO_2. X-ray diffraction (XRD) and UV－Vis absorption results revealed that films processed below 850℃ were ZnO in wurzite structure, and films processed above 850℃ were Zn_2SiO_4 in wellimite structure. Photoluminescence measurements of the Tb-doped Zn_2SiO_4 films showed two strong emission bands at 490 and 545nm. The photoluminescence lifetime was 4.6ms.     

抽指加权宽带扇形叉指声表面波滤波器的等效电路分析

扇形换能器可以看成若干个沿孔径方向划分的均匀孔径换能器电端并联而成，根据梅森(Mason)等效电路模型以及由其延伸的混合场等效电路模型，推导出整个扇形换能器的导纳矩阵和频率响应，其中采用复阻抗模型考虑了叉指电极与自由表面的阻抗不连续的因素。本方法能够模拟指间反射、三次行程、指条寄生阻抗以及外围电路等对器件性能的影响；理论模拟与实验结果吻合。     

碳纳米管阵列、捆束的三步升温工艺制备及其形貌与结构

使用结构简单的单温炉设备，通过三步升温热解二茂铁、三聚氰氨混合物方法，在二氧化硅、多晶陶瓷基底上分别合成了碳纳米管阵列、碳纳米管捆束.使用扫描电子显微镜、透射电子显微镜、电子能量损失谱和x射线光电子能谱对合成样品进行了结构和成分分析.结果显示：两种基底上合成的纳米管均为多壁纯碳管；生长于光滑二氧化硅表面的碳纳米管具有高度取向性和一致的外径，长度为10—40μm.碳纳米管采取催化剂顶端生长模式并展示出类杯状形貌；生长于粗糙多晶陶瓷表面的碳纳米管捆束随机取向，碳纳米管直径为15—80nm，长度在几百微米，展示 关键词： 碳纳米管 热解法 三步升温工艺     

Synthesis and Photophysical Properties of Ferrocene Containing Monomer and Polymer

Synthesis of a new monomer and polymer containing both ferrocene and hydrazone moieties are reported. The obtained materials were examined by various techniques including differential scanning calorimetry, UV, IR, NMR spectroscopy, and time of flight method. These materials may be of particular interest for the development of future electrophotographic photoreceptors as electron photoemission spectra of the layers showed ionization potentials of 5.35–5.41 eV. The hole drift mobility values in compositions of the designed structures with bisphenol Z polycarbonate exceeded 10⁻⁸ cm²/Vs at strong electric fields.     

Synthesis of Highly Functionalized Isoxazolinediones from One-pot Reaction of Alkylidene Meldrum ’s Acid with Alkyl Isocyanides in the Presence of Arylhydroxylamines

Alkyl isocyanides undergo a smooth reaction with alkylidene Meldrum’s acids in the presence of arylhydroxylamines to produce N ¹-alkyl-2-(3,5-dioxo-2-aryltetrahydro-4-isoxazolyl)alkanamides in high yields.