Thermal analysis and expected performance of the low energy instrument on board the HXMT satellite

The Low Energy X-ray Instrument (LE) of the Hard X-ray Modulation Telescope (HXMT) uses the Swept Charge Device (SCD) to detect the X-rays in 1-15 keV. The performance of SCD is vulnerable to temperature. We analyzed the thermal condition of LE at different satellite working attitudes with the Finite Element Method (FEM). It is shown that the angle between the sunlight and the normal line of the barrier should be less them 26°, to keep the SCD detectors working in the required temperature range, i.e. -40 ℃ to -80 ℃. We find that the performance of LE is very stable in this temperature range, with a typical energy resolution of 160 eV at 5.9 keV.     

热管式吸附床制冷性能的实验研究

利用高效热管作为吸附床的传热部件,有效地提高了船用柴油机废气的热量回收。本文将热管式吸附床与传统的壳管式吸附床进行了性能对比。同时,选择氯化钙-氨作为吸附工质对,通过实验测定解吸、吸附过程的变化情况。本文的研究结果表明,采用热管式吸附床使得初始解吸和吸附速率有明显提高,从而有效缩短解吸和吸附周期,并能有效提高系统的SCP和COP。     

侧边抛磨光纤波导传输特性的理论分析

在建立侧边抛磨光纤D型光纤边界条件的基础上,用三维有限差分光束传输法计算和分析了侧边抛磨光纤器件的光功率衰减随光纤的侧边抛磨长度、光纤侧边抛磨后剩余包层的厚度、以及填充聚合物材料折射率三个参量变化的特性.结果表明,侧边抛磨光纤器件的光功率衰减随着抛磨长度的增加而增大;当抛磨长度等于9 mm时,光功率衰减随着剩余包层厚度的增大而单调递减.而当抛磨长度大于9 mm时,剩余包层厚度小于3 μm的范围内,光衰减随着剩余包层厚度的增加出现振荡;当聚合物折射率与纤芯折射率相同时,光功率衰减最大.     

多股流换热器网络优化的衍生网络法

从换热器网络综合及优化中相互矛盾的投资费用和运行费用分析入手,以多股流换热器代替两股流换热器网络,建立了一种网络优化目标的松弛技术,即在整体网络优化中允许小面积换热器的存在,然后通过多股流换热器对小换热器进行合并处理.结果表明,应用该方法进行换热网络的综合优化,可以充分发挥多股流换热器的优点,获得综合费用更低的换热网络结构.     

Spatial anisotropy: a method to study anisotropic flow in heavy ion collisions

We introduce a method to study anisotropic flow parameter v<,n> as a collective probe to Quark Gluon Plasma in relativistic heavy ion collisions. The emphasis is put on the use of the Fourier expansion of initial spatial azimuthal distributions of participant nucleons in the overlapped region. The coefficients ε<,n> of Fourier expansion are called the spatial anisotropy parameter for the n-th harmonic. We propose that collective dynamics can be studied by v<,n>/ε<,n>. In this paper, we will discuss in particular the second (n=2) and the fourth (n=4) harmonics.     

CdS/ZnO纳米复合结构的制备、表征及其光催化活性的改善

利用简单的水热法在ZnO纳米棒表面合成CdS纳米粒子.用扫描电镜(SEM)和X射线衍射(XRD)对CdS/ZnO异质结构进行表征.实验结果表明,在生长CdS的过程中ZnO被逐渐地腐蚀.选择CdS/ZnO纳米复合材料作为光催化剂在紫外光和绿光照射的条件下降解甲基橙(MO).CdS/ZnO纳米复合材料纳米棒作为光催化剂降解...     

Electromechanical cracking in ferroelectrics driven by large scale domain switching

Experimental results indicate three regimes for cracking in a ferroelectric double cantilever beam (DCB) under combined electromechanical loading. In the loading, the maximum amplitude of the applied electric field reaches almost twice the coercive field of ferroelectrics. Thus, the model of small scale domain switching is not applicable any more, which is dictated only by the singular term of the crack tip field. In the DCB test, a large or global scale domain switching takes place instead, which is driven...     

基于色酮骨架的新型Pd(II)配合物的合成及其晶体结构

以3-碘代色酮、降冰片烯、新戊酸钯和三(4-甲氧苯基)膦为原料,通过“一锅法”合成了一种含色酮骨架的新型Pd(II)配合物,其结构经¹H NMR, ¹³C NMR, ³¹P NMR和HR-MS（ESI-TOF）表征。X-射线单晶衍射分析显示该配合物晶体属于三斜晶系,P₁空间群,Pd与周围的4个原子形成了扭曲的平面四边形结构。     

Nb3Sn超导材料的高场钉扎行为

本文利用线性回归分析法处理扩散和气相沉积Nb₃Sn带材样品以及青铜法多芯Nb₃Sn线材样品在高场(²2T)下的临界电流测试数据,得到J_c-B曲线和钉扎力随磁场变化的经验规律。该规律与Kramer模型的钉扎力公式不一致,有待提出新的理论模型加以说明。 关键词：