Model system for the study of 2D phase transitions and supramolecular interactions at electrified interfaces: hydrogen-assisted reductive desorption of catechol-derived adlayers from Pt(111) single-crystal electrodes

Classical electroanalytical techniques and in situ FTIR are used to study the oxidative chemisorption of catechol (o-H(2)Q) and the hydrogen-assisted reductive desorption of catechol-derived adlayers (o-Q((ads))) at nearly defect-free Pt(111) single-crystal electrodes in 0.5 M H(2)SO(4). At near equilibrium conditions (lim(upsilon-->0)) the cyclic voltammetric response does not conform to the behavior expected from classical models of molecular adsorption at electrochemical interfaces. Instead, attractive interactions play a controlling role, i.e., hydrogen-assisted displacement of o-Q((ads)) takes place as an electrochemically reversible two-dimensional (2D) phase transition controlled by collision-nucleation-growth phenomena in the presence of 2 mM o-H(2)Q((aq)). In contrast, different desorption dynamics are observed when the reductive desorption of the adlayers is carried out in clean (0 mM o-H(2)Q((aq)) supporting electrolyte. Donor-acceptor (DA) interactions between the Pt(111)/o-Q((ads)) surface adduct and o-H(2)Q((aq)) are postulated as a possible intervening mechanism leading to the observed differences in the macroscopic electrochemical responses. The results also demonstrate that in aqueous solutions it is thermodynamically feasible to shift the formal oxidation potential of catechol-metal adducts to potentials near those of molecular hydrogen via chemically reversible, nondissociative interactions, taking place as a 2D phase transition.     

Influence of the protonic state of an imidazole-containing ligand on the electrochemical and photophysical properties of a ruthenium(II)-polypyridine-type complex

The synthesis and characterisation of [Ru(bpy)2(PhenImHPh)]2+ where PhenImHPh represents the 2-(3,5-di-tert-butylphenyl)imidazo[4,5-f][1,10]phenanthroline ligand are described. The compounds issued from the three different protonic states of the imidazole ring [Ru(bpy)2(PhenImPh)]+ (I), [Ru(bpy)2(PhenImHPh)]2+ (II) and [Ru(bpy)2(PhenImH2Ph)]3+ (III) were isolated and spectroscopically characterised. The X-ray structures of [Ru(bpy)2(PhenImPh)](PF6)H2O.6 MeOH, [Ru(bpy)2(PhenImHPh)](NO3)2H2O.3 MeOH and [Ru(bpy)2(PhenImH2Ph)](PF6)3 5 H2O are reported. Electrochemical data obtained on these complexes indicate almost no potential shift for the Ru(III/II) redox couple. Therefore a Coulombic effect between the imidazole ring and the metal centre can be ruled out. The monooxidised forms of I and II have been characterised by EPR spectroscopy and are reminiscent of the presence of a radical species. The emission properties of the parent compound [Ru(bpy)2(PhenImHPh)]2+ were studied as a function of pH and both the lifetimes and intensities decreased upon deprotonation. Photophysical properties, investigated in the absence and presence of an electron acceptor (methylviologen), were distinctly different for the three compounds. Transient absorption features indicate that unique excited states are involved. Theoretical data obtained from DFT calculations in water on the three protonic forms are presented and discussed in the light of the experimental results.     

Characterization by high-performance liquid chromatography/electrospray ionization quadrupole time-of-flight mass spectrometry of the lipid fraction of Spirulina platensis pressurized ethanol extract

Microalgae have been suggested as a potential source for new functional ingredients, making possible the development of new functional foods from natural origin. Among the natural ingredients, polyunsaturated fatty acids (PUFAs) have generally been identified as an interesting group of compounds with biological activity, mainly related to their anti-inflammatory properties. In this regard, the use of environmentally friendly extraction procedures (e.g. pressurized liquid extraction, PLE) to obtain such natural ingredients is also becoming necessary. In this work, an exhaustive characterization of the lipid fraction of a pressurized ethanolic extract of the microalga Spirulina platensis is carried out. To achieve this objective high-performance liquid chromatography (HPLC) coupled to quadrupole time-of-flight mass spectrometry (QTOF-MS) is employed. The use of the QTOF analyzer allows the selection and isolation of precursor ions as well as providing the high efficiency, sensitivity and mass accuracy required. By means of this powerful hyphenated technique, it was possible to identify several polar lipids in an extract of S. platensis (some of them, to our knowledge, described for the first time in this work), including four free fatty acids, four monogalactosyl monoacylglycerols, three phosphatidylglycerols and two sulfoquinovosyl diacylglycerols.     

Nonthermal microwave effects revisited: on the importance of internal temperature monitoring and agitation in microwave chemistry

The concept of nonthermal microwave effects has received considerable attention in recent years and is the subject of intense debate in the scientific community. Nonthermal microwave effects have been postulated to result from a direct stabilizing interaction of the electric field with specific (polar) molecules in the reaction medium that is not related to a macroscopic temperature effect. In order to probe the existence of nonthermal microwave effects, four synthetic transformations (Diels-Alder cycloaddition, alkylation of triphenylphosphine and 1,2,4-triazole, direct amide bond formation) were reevaluated under both microwave dielectric heating and conventional thermal heating. In all four cases, previous studies have claimed the existence of nonthermal microwave effects in these reactions. Experimentally, significant differences in conversion and/or product distribution comparing the conventionally and microwave-heated experiments performed at the same measured reaction temperature were found. The current reevaluation of these reactions was performed in a dedicated reactor setup that allowed accurate internal reaction temperature measurements using a multiple fiber-optic probe system. Using this technology, the importance of efficient stirring and internal temperature measurement in microwave-heated reactions was made evident. Inefficient agitation leads to temperature gradients within the reaction mixture due to field inhomogeneities in the microwave cavity. Using external infrared temperature sensors in some cases results in significant inaccuracies in the temperature measurement. Applying the fiber-optic probe temperature monitoring device, a critical reevaluation of all four reactions has provided no evidence for the existence of nonthermal microwave effects. Ensuring efficient agitation of the reaction mixture via magnetic stirring, no significant differences in terms of conversion and selectivity between experiments performed under microwave or oil bath conditions at the same internally measured reaction temperatures were experienced. The observed effects were purely thermal and not related to the microwave field.     

Optimization of a FIA system with amperometric detection by means of a desirability function: determination of sulfadiazine, sulfamethazine and sulfamerazine in milk

A sensitive and cheap FIA, with amperometric detection, analytical procedure is developed in this paper to determine sulfadiazine, sulfamethazine and sulfamerazine in milk. A multicriteria optimization based on the use of a desirability function is used for optimizing two analytical responses (peak height and its variability) since single-objective optimizations lead to conflicting experimental conditions. In the optimum conditions, the determination of the three sulfonamides in milk samples is carried out, the analytical procedure being validated according to Commission Decision 2002/657/EC. The decision limit at 0 and 100 microg L(-1) (which is the maximum residue limit in milk) are 13.9 and 110.2, 9.5 and 107.1 and 9.1 and 107.1 microg L(-1) for sulfadiazine, sulfamethazine and sulfamerazine, respectively. Whereas the values of capability of detection, CCbeta, obtained at 0 and 100 microg L(-1) were 26.9 and 119.8, 18.2 and 113.6, and 17.5 and 113.7 microg L(-1) for sulfadiazine, sulfamethazine and sulfamerazine, respectively. Recovery values between 67.4% and 119.1% are found for milk test samples of two brands of milk. The accuracy of the method is confirmed. The ruggedness of the procedure is evaluated by means of a Plackett-Burman design. The relative errors were lower than 2.5% (n=7).     

Serial coupled columns reversed-phase separations in high-performance liquid chromatography. Tool for analysis of complex real samples

High-performance liquid chromatography is considered as the selected analytical tool for a huge number of applications, including the carotenoid analysis. However, due to the great complexity of some natural samples containing this kind of compounds, conventional LC could not have enough separation power. In this work, serial connection of several columns is proposed as an alternative to LC and also to comprehensive two-dimensional LC for the analysis of carotenoids from complex real matrices. Different parameters regarding these separation procedures are studied and discussed, such as the stationary phase used or the application of high separation temperatures. The applicability of connecting two C30 columns to significantly increase the separation power, resolution and peak capacity for the analysis of carotenoids has been demonstrated for the first time. In fact, a peak capacity of 79 was obtained when using two C30 serial coupled columns, compared to 61 achieved using a single column. Similar improvements were also observed for the other serial couplings studied. The present methodology could be applied to the analysis of carotenoids in a great variety of samples. To the best of our knowledge, this is the first development carried out to study natural products such as carotenoids using columns coupled in series.     

The gated electrostatic mass spectrometer (GEMS): Definition and preliminary results

GEMS is a new type of time-of-flight mass spectrometer based on an electrostatic energy analyzer. Mass resolution equals the energy analyzer kinetic energy resolution, which is set by its slit size. In GEMS, monochromatic ions enter the entrance slit at random times, and the gated ion deflection produced by the electrostatic field in the analyzer rejects ions that are inside the analyzer at gate onset, detecting those entering the analyzer after gate onset. This provides mass separation while overcoming the temporal and spatial spread problems typical of TOF applications. Paradoxically, GEMS works because all ion masses follow identical trajectories. GEMS is easily multiplied into two-dimensional arrays to increase sensitivity in space applications, requires relatively low voltages, and uses only a few electrical connections. Thus, it is easy to package GEMS as a small, low-power instrument for applications in harsh environments. A disadvantage of GEMS is that its output is the integral of the TOF spectrum and the derivative of the raw data must be taken, a procedure that is likely to add noise. A version of GEMS detecting un-deflected ions (u-GEMS) has been tested to demonstrate the time-integrated feature of the raw data but without the benefit of energy analysis. This paper describes GEMS implemented with the small deflection energy analyzer (SDEA), a compact version of the parallel plate energy analyzer. SDEA is described both analytically and with ion trajectory simulations using the ion trajectory simulation software SIMION; the results are then used to describe GEMS and compute its performance.     

Instabilities in buoyant flows under localized heating

We study, from the numerical point of view, instabilities developed in a fluid layer with a free surface in a cylindrical container which is nonhomogeneously heated from below. In particular, we consider the case in which the applied heat is localized around the origin. An axisymmetric basic state appears as soon as a nonzero horizontal temperature gradient is imposed. The basic state may bifurcate to different solutions depending on vertical and lateral temperature gradients and on the shape of the heating function. We find different kinds of instabilities: extended patterns growing on the whole domain, which include those known as targets, and spiral waves. Spirals are present even for infinite Prandtl number. Localized structures both at the origin and at the outer part of the cylinder may appear either as Hopf or stationary bifurcations. An overview of the developed instabilities as functions of the dimensionless parameters is presented in this article.     

Constraints at the transition state of the D + H2 reaction: quantum bottlenecks vs. stereodynamics

This article presents a quasiclassical trajectory method for the calculation of cumulative reaction probabilities by sampling of the helicity quantum number of the reagents (k). The method is applied to the D + H(2) reaction at various total angular momentum (J) values, and the helicity-resolved quasiclassical cumulative reaction probabilities are compared to their quantum mechanical counterparts. The agreement between the two sets of results is fairly good. In particular, k-dependent, J-independent reaction thresholds found with quantum methods are reproduced by the quasiclassical calculations. The shift of these thresholds with increasing k, which has been previously attributed to the quantum bottleneck states taking part in the reaction, is revisited and discussed also in terms of the reaction stereodynamics.     

Heterolytic O−O Bond Cleavage Upon Single Electron Transfer to a Nonheme Fe(III)−OOH Complex

The one-electron reduction of the nonheme iron(III)-hydroperoxo complex, [Fe^III(OOH)(L₅²)]²⁺ (L₅²=N-methyl-N,N’,N’-tris(2-pyridylmethyl)ethane-1,2-diamine), carried out at −70 °C results in the release of dioxygen and in the formation of [Fe^II(OH)(L₅²)]⁺ following a bimolecular process. This reaction can be performed either with cobaltocene as chemical reductant, or electrochemically. These experimental observations are consistent with the disproportionation of the hydroperoxo group in the putative Fe^II(OOH) intermediate generated upon reduction of the Fe^III(OOH) starting complex. One plausible mechanistic scenario is that this disproportionation reaction follows an O−O heterolytic cleavage pathway via a Fe^IV-oxo species.