True spin and pseudo spin entanglement around Dirac Points in graphene with Rashba spin–orbit interaction

We analytically obtained the Schmidt decomposition of the entangled state between the pseudo spin and the true spin in graphene with Rashba spin–orbit coupling. The entangled state has the standard form of the Bell state, where the SU(2) spin symmetry is broken. These states can be explicitly expressed as the superposition of two nonorthogonal, but mirror symmetrical spin states entangled with the pseudo spin states. Because of the closely locking between the pseudo spin and the true spin, it is found that the orbit curve in the spin-polarization parameter space for the fixed equi-energy contour around Dirac points has the same shape as the $\delta \overrightarrow{k}$-contour. Due to the spin–orbit coupling that cause the topological transition in the local geometry of the dispersion relation, the new equi-energy contours around the new emergent Dirac Points can be obtained by squeezing the one around the original Dirac point. The spin texture in the momentum space around the Dirac points is analyzed under the Rashba spin–orbit interaction and it is found that the orientation of the spin polarization at each crystal momentum $\overrightarrow{k}$ is independent of the Rashba coupling strength.     

硅氧烷交联的咪唑基团功能化聚苯醚/聚四氟乙烯耐高温质子交换膜

以聚苯醚(PPO)为基体材料, 通过溴甲基化及咪唑基团功能化, 与聚四氟乙烯(PTFE)复合、 硅氧烷基团水解交联及磷酸掺杂, 制备了兼具高磷酸掺杂含量、 高质子电导率和良好机械性能的高温质子交换膜材料. 以甲基咪唑(MeIm)和咪唑基硅氧烷化合物(SiIm)为功能化试剂(其中咪唑基团提供了磷酸作用位点, 同时SiIm中的硅氧烷基团水解后得到Si—O—Si交联网络结构), 提高了膜材料的机械稳定性. 与PTFE的复合进一步增强了膜材料的机械强度. 结果表明, 复合膜具有较高的电导率和一定的机械强度. 当磷酸掺杂质量分数为242.5%时, PPO-50%SiIm-50%MeIm/PTFE复合膜在160 ℃不加湿条件下的电导率为0.09 S/cm, 室温下的断裂拉伸强度为3.6 MPa.     

A rapid UPLC‐MS/MS method for the determination of oleanolic acid in rat plasma and liver tissue: application to plasma and liver pharmacokinetics

A reliable high‐throughput ultra‐high performance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) method was developed and validated for oleanolic acid (OA) determination in rat plasma and liver tissue using glycyrrhetic acid as the internal standard (IS). Plasma and liver homogenate samples were prepared using solid‐phase extraction. Chromatographic separation was achieved on a C₁₈ column using an isocratic mobile phase system. The detection was performed by multiple reaction monitoring mode via positive electrospray ionization interface. The calibration curves showed good linearity (R² > 0.9997) within the tested concentration ranges. The lower limit of quantification for plasma and liver tissue was ≤0.75 ng/mL. The intra‐ and inter‐day precision and accuracy deviations were within ±15% in plasma and liver tissue. The mean extraction recoveries ranged from 80.8 to 87.0%. In addition, the carryover, matrix effect, stability and robustness involved in the method were also validated. The method was successfully applied to the plasma and hepatic pharmacokinetics of OA after oral administration to rats. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Tadalafil Analogues

Five novel compounds as potential phosphodiesterase type 5 (PDE‐5) inhibitors were synthesized from D‐tryptophan methyl ester via the Pictet–Spengler reaction and cyclization reaction. The structures of those compounds were confirmed by elemental analyses, IR, ¹H NMR, and ESI‐MS spectra.     

HL-2Aװ��3.7GHz LHCDϵͳ������Ч�ʲ�������

The power measurement method for 3.7GHz LHCD system on HL-2A was introduced. It is found by HFSS simulation that the impact of backward wave phase on the measurement of forward power may be suppressed if the isolation of directional coupler is more than 30dB. After improving the system, the total transmission line efficiency of the LHCD system can reach 89% with maximum power 1.5MW in 2016 experiment campaign.     

Development and testing of a Frisch-Grid Ionization Chamber for the measurement of low activity of alpha-particle emitters

Journal of Radioanalytical and Nuclear Chemistry - A Frisch-grid Ionization Chamber (FGIC) for the measurement of low activity of alpha-particle emitters has been built. The design and performance...     

Eco-friendly solution processing of all-polymer solar cells: Recent advances and future perspective

All-polymer solar cells (all-PSCs) exhibit great potentials in commercial applications. All-PSCs have observed steady performance gains with power conversion efficiency now reaching over 17% in the open literature. However, the current processing of all-PSCs relies predominantly on toxic, chlorinated solvents in moisture-free environments, representing a significant barrier for their commercialization due to the added costs to handle and dispose of such solvents. There is thus an urgent need for safe, environmentally benign, and sustainable ink-based processing methods to produce all-PSC devices reliably and reproducibly in ambient air. In this perspective, fundamental insights on the interplay between all-polymer blend morphologies and eco-friendly solvents are provided. Also, we discuss the recent successes of the green processing methods to manipulate the photoactive morphologies for high-efficiency all-PSCs. In the end, we provide an outlook on future challenges and opportunities of eco-friendly solvents processed all-PSCs for large-scale manufacturing.     

Directed Gas Phase Formation of Silene (H2SiCH2)

The silene molecule (H₂SiCH₂; X¹A₁) has been synthesized under single collision conditions via the bimolecular gas phase reaction of ground state methylidyne radicals (CH) with silane (SiH₄). Exploiting crossed molecular beams experiments augmented by high-level electronic structure calculations, the elementary reaction commenced on the doublet surface through a barrierless insertion of the methylidyne radical into a silicon-hydrogen bond forming the silylmethyl (CH₂SiH₃; X²A′) complex followed by hydrogen migration to the methylsilyl radical (SiH₂CH₃; X²A′). Both silylmethyl and methylsilyl intermediates undergo unimolecular hydrogen loss to silene (H₂SiCH₂; X¹A₁). The exploration of the elementary reaction of methylidyne with silane delivers a unique view at the widely uncharted reaction dynamics and isomerization processes of the carbon–silicon system in the gas phase, which are noticeably different from those of the isovalent carbon system thus contributing to our knowledge on carbon silicon bond couplings at the molecular level.     

Amides and Heparin‐Like Polymer Co‐Functionalized Graphene Oxide Based Core @ Polyethersulfone Based Shell Beads for Bilirubin Adsorption

Excessive bilirubin in the body of patient with liver dysfunction or metabolic obstruction may cause jaundice with irreversible brain damage, and new type of adsorbent for bilirubin is under frequent investigation. Herein, graphene oxide based core @ polyethersulfone‐based shell beads are fabricated by phase inversion method, amides and heparin‐like polymer are introduced to functionalize the core‐shell beads. The beads are successfully prepared with obvious core‐shell structure, adequate thermostability and porous shell. Clotting times and protein adsorption are investigated to inspect the hemocompatibility property of the beads. The adsorption of bilirubin is systematically investigated by evaluating the effects of contacting time, initial concentration and temperature on the adsorption, which exhibits improved bilirubin adsorption amount for the beads with amides contained cores or/and shells. It is worth believing that the amides and heparin‐like polymer co‐functionalized core‐shell beads may be utilized in the field of hemoperfusion for bilirubin adsorption.     

Recyclable MoO3 nanobelts for photocatalytic degradation of Rhodamine B by near infrared irradiation

Molybdenum trioxide (MoO₃) represented an excellent photocatalytic performance with many applications, including degradation of organic contaminants and splitting of water. This paper presented a new route to synthesize MoO₃ nanobelts with high aspect ratios and crystallinity by a hydrothermal technique. This work showed that the as-synthesized nanobelts exhibited strong photocatalytic activity to degrade an organic dye of Rhodamine B (RhB) in aqueous solution under the exposure of the light source in the near infrared wavelength range, significantly improving the photocatalytic activity of the nanobelts. The results also showed that for a small concentration of RhB at 7.5 mg/L a complete photodegradation (for a given MoO₃ nanobelts quantity of 0.1 g) can be reached after exposing for 60 min. For all concentrations of the RhB solution, the photodegradation exhibited an exponential dependence on the exposure time followed by a sudden shutdown, but no complete photodegradation can be reached. Also, the residual quantity of RhB in solution after the photocatalytic reaction was determined by the initial RhB concentration. The photocatalytic degradation can be interpreted by the pseudo–first-order equation for the absorption of liquid/solid based on solid capacity; thus, photocatalytic degradation can be attributed to the interaction between the photoexcited electrons in the substrate and the antibonding orbital of the RhB in solution. The sudden shutdown was due to the inability of the photoexcited electrons in the substrate hopping to the antibonding orbital of RhB in the presence of the RhB intermediate products from the degraded RhB. In addition, this work showed that the photocatalytic reaction can be recovered after a thermal treatment of postreacted MoO₃ nanobelts, enhancing the utilization efficiency of the catalysis.