Selective separation of lead from aqueous solution with a novel Pb(II) surface ion-imprinted sol-gel sorbent

A novel Pb(II) ion-imprinted mesoporous sorbent (IIMS) was synthesized by a surface imprinting technique combined with a sol-gel process and characterized by FT-IR and N₂ adsorption-desorption. Compared to the non-imprinted mesoporous sorbent (NIMS), the IIMS had a higher adsorption capacity and selectivity for Pb(II). The maximum static adsorption capacities of the IIMS and NIMS for Pb(II) were 221 and 173 mg g^?1, respectively. The relative selectivity coefficients of the sorbent for Pb(II) in the presence of Cd(II), Cu(II) and Zn(II) were 3.7, 1.9 and 3.4, respectively. Furthermore, the IIMS possessed a fast kinetics for Pb(II) sorption from aqueous solution with saturation time of <?20 min, and could be used repeatedly. The detection limit (3σ) of this method was 0.23 ng mL^?1 and relative standard deviation of 11 replicate determinations was 3.7 %. The IIMS has been applied to selectively separate and determine Pb(II) in real water samples with satisfactory results.     

热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

[N_2O_2]型镍基配合物在中性水溶液中产氢性能的研究

通过简单易行的曼尼希(Mannich)反应,合成了一种[N_2O_2]型配体,在少量三乙胺存在条件下,成功实现了与高氯酸镍配位,得到了镍金属配合物。通过核磁共振氢谱、高分辨质谱等手段对配体和配合物进行了表征。该化合物在水中具有一定的溶解度,并在中性磷酸缓冲溶液中显示出良好的电化学催化产氢活性。     

Aptamer-barcode based immunoassay for the instantaneous derivatization chemiluminescence detection of IgE coupled to magnetic beads

We report on a highly sensitive aptameric assay system for the determination of IgE, where a special chemiluminescence (CL) reagent, 3,4,5-trimethoxylphenylglyoxal (TMPG), acts as the signaling molecule and polystyrene beads as the amplification platform. Briefly, a "sandwich-type" detection strategy is employed in our design, where magnetic beads functionalized with a capture antibody were reacted with the target protein IgE, and then sandwiched with the aptamer-barcodes which were prepared by assembling polystyrene beads with IgE aptamer. The target immunoreaction event could be sensitively detected via an instantaneous derivatization reaction between TMPG and the guanine (G) nucleotides within the aptamer-barcodes to form an unstable CL intermediate for the generation of light. Further signal amplification is achieved by extending the G nucleotide-rich domain on the aptamer backbone for second amplification. Such simple amplified CL transduction allows the detection of IgE down to the 4.6 pM level, which is better than most previous aptameric methods for IgE detection. This new protocol also provides a good capability in discriminating IgE from nontarget proteins such as IgG, IgA, IgM, interferon and thrombin. The practical application of the proposed aptamer-barcode based immunoassay was successfully carried out for the determination of IgE in 20 human serum samples. It is straightforward to adapt this strategy to detect a spectrum of other proteins by using different aptamers, thus this method may offer a new direction in designing high-performance CL aptasensors for early diagnoses of diseases.     

Synthesis of azo benzothiazole polymer and its application of 1 × 2 Y-branched and 2 × 2 Mach–Zehnder interferometer switch

The azo benzothiazole polyurethane–urea (ABPUU) was synthesized from chromophore molecule 4-[(6-nitrobenzothiazole-2-yl)diazenyl]phenyl-1,3-diamine NBDPD, polyether polyol (NJ-210) and isophorone diisocyanate (IPDI). The structure, thermal property, mechanical property and physical property were characterized and investigated. The refractive index (n) and thermo-optic coefficient (dn/dT) of ABPUU was determined at different temperature and wavelength (532 nm, 650 nm and 850 nm) using attenuated total reflection (ATR) technique. Using the CCD digital imaging devices, transmission loss of ABPUU was measured. A 1 × 2 Y-branched and 2 × 2 Mach–Zehnder interferometer (MZI) switch with two rib waveguides, dual driving electrodes and two critical 3-dB couplers polymeric thermo-optic switches based on thermo-optic effect of prepared ABPUU were designed and simulation. The power consumption of the Y-branched switch is less than 0.84 mW. The Y-branched and MZI switching rising and falling times obtained are 0.8 ms and 0.2 ms, respectively.     

Preparation, thermo-optic property and simulation of optical switch based on azo benzothiazole polymer

An azo chromophore molecule 4-[(benzothiazole-2-yl)diazenyl]phenyl-1,3-diamine (BTPD) was prepared with 2-amino benzothiazole and m-phenylenediamine by diazo-coupling reaction. Then, the chromophore molecule BTPD was polymerized with NJ-210 and isophorone diisocyanate (IPDI) to obtain novel azo benzothiazole polymer (BTPU). The structures of BTPD and BTPU were characterized using the Fourier transform infrared, UV–visible spectroscopy, DSC and TGA. The physical properties of the obtained BTPU were investigated. The refractive index (n) of BTPU was demonstrated at different temperature and wavelength (532, 650 and 850 nm) using attenuated total reflection technique. The transmission loss and dispersion characteristic of BTPU film were investigated using the CCD digital imaging devices and Sellmeyer equation. A Y-branch and 2 × 2 Mach–Zehnder interferometer (MZI) polymeric thermo-optic switches based on the thermo-optic effect of prepared BTPU were proposed and the performance of switches was simulated. The results indicated that the power consumption of the Y-branch thermo-optic switch could be only 0.6 mW. The Y-branch and MZI switching rising and falling times obtained were 8.0 and 1.8 ms.     

A Robust Solid Electrolyte Interphase Layer Augments the Ion Storage Capacity of Bimetallic‐Sulfide‐Containing Potassium‐Ion Batteries

Metal–organic framework‐derived NiCo_2.5S₄ microrods wrapped in reduced graphene oxide (NCS@RGO) were synthesized for potassium‐ion storage. Upon coordination with organic potassium salts, NCS@RGO exhibits an ultrahigh initial reversible specific capacity (602 mAh g^?1 at 50 mA g^?1) and ultralong cycle life (a reversible specific capacity of 495 mAh g^?1 at 200 mA g^?1 after 1 900 cycles over 314 days). Furthermore, the battery demonstrates a high initial Coulombic efficiency of 78 %, outperforming most sulfides reported previously. Advanced ex situ characterization techniques, including atomic force microscopy, were used for evaluation and the results indicate that the organic potassium salt‐containing electrolyte helps to form thin and robust solid electrolyte interphase layers, which reduce the formation of byproducts during the potassiation–depotassiation process and enhance the mechanical stability of electrodes. The excellent conductivity of the RGO in the composites, and the robust interface between the electrodes and electrolytes, imbue the electrode with useful properties; including, ultrafast potassium‐ion storage with a reversible specific capacity of 402 mAh g^?1 even at 2 A g^?1.     

Synthesis, characterization and mechanism of cetyltrimethylammonium bromide bilayer-encapsulated gold nanosheets and nanocrystals

Single-crystal Au nanosheets and fcc gold nanocrystals of uniform size were synthesized by a novel and simple route. The results of field-emission scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) indicated the formation of the single-crystal structure of gold nanosheets and fcc nanocrystals. Energy-dispersive analysis of X-ray (EDAX) showed absorbance of cetyltrimethylammonium bromide (CTAB) molecules onto the surface of gold nanostructures. Moreover, zeta potential measurements showed that CTAB-coated nanostructures were positively charged and the zeta potential remained almost the same upon centrifugation and redispersion of the resulting nanostructures in methanol, confirming the high stability of the surfactant-protected nanocomposites. Evolution of the nanostructures during the reaction was monitored by TEM observations. The results indicated that the formation of the gold nanostructures followed a two-step mechanism with a bilayer CTAB structure on the surface of the gold nanostructures.     

利用空间位阻和氢溢流协同作用促进5-羟甲基糠醛选择性加氢制备5-甲基糠醛

化学工业生产中，用氢气为还原剂，通过选择性加氢可以制备多种重要化学品。5-羟甲基糠醛是重要的生物质基平台化合物，而5-甲基糠醛是用途广泛的化学品。由5-羟甲基糠醛加氢得到5-甲基糠醛是一条非常理想的路径，但是选择性活化C-OH非常困难。本文设计并制备了Pt@PVP/Nb₂O₅(PVP: 聚乙烯吡咯烷酮)催化剂，该催化体系巧妙地结合了位阻效应、氢溢流和催化剂界面的电子效应，系统研究了该催化剂对5-羟甲基糠醛选择性加氢制备5-甲基糠醛催化性能，在最优条件下，5-甲基糠醛的选择性可达92%。利用密度泛函理论计算研究了5-羟甲基糠醛选择性加氢制备5-甲基糠醛反应路径。