在改进的Ni基催化剂上的甲烷部分氧化制合成气反应

 本文采用高温分解和焙烧硝酸盐的方法合成了一系列Ni基六铝酸盐催化剂BaNiyAl12-yO19-δ (y=0.1、0.3、0.6、0.9和1.0)，并对它们在甲烷部分氧化制合成气反应中的催化性能、催化剂表面积碳及活性组分Ni流失等情况进行了考察。结果表明，该催化剂对甲烷部分氧化制合成气反应具有较好的催化活性，在850 ℃，甲烷转化率和CO选择性分别可达92%和95%。并且催化剂BaNiyAl12-yO19-δ (y=0.3)在100小时的POM反应后，催化剂表面积碳很少，积碳量仅为样品净重的0.8%，特别是100小时反应后，催化剂表面活性组分Ni没有发生流失。这种低积碳量和无活性组分Ni流失与催化剂结构中Ni与相邻原子间的强相互作用有关。     

Theoretical study of initiated reaction mechanism of polymerization of maleic anhydride catalyzed by OH−1 anion

A theoretical study of the polymerization reaction mechanism of maleic anhydride (MA) initiated by hydrate is presented. The reaction pathway has been studied with the density functional theory (DFT) method at the B3LYP/6‐311G** level. The geometrical parameters of transition states (TS) are optimized; intrinsic reaction coordinate (IRC) calculations have also been performed to obtain further credible features. Frequency analyses of all the stationary points are calculated at the same basis sets. The total energies of all geometries are corrected at second‐order Møller–Plesset (MP2)/6‐311G**. Calculation results reveal that the reaction mechanism is attributable to anion polymerization. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Synthesis of (-)-calicoferol B

The first total synthesis of (-)-calicoferol B (III) is described. The cyclozirconation product I, prepared in enantiomerically pure form, was converted into the CD ring chiron II. This was coupled with the aromatic A-ring, and then the side chain was constructed with control of relative and absolute configuration to complete the total synthesis of III. The first total synthesis of (-)-calicoferol B (1) is described. The cyclozirconation product 8, prepared in enantiomerically pure form, was converted into the CD ring chiron 6. This was coupled with the aromatic A-ring, and then the side chain was constructed with control of relative and absolute configuration to complete the total synthesis of 1.     

Effects of hydrothermal post-treatment on microstructures and morphology of titanate nanoribbons

Titanate nanoribbons were prepared via a hydrothermal treatment of rutile-type TiO₂ powders in a 10 M NaOH solution at 200 °C for 48 h. The as-prepared titanate nanoribbons were then hydrothermally post-treated at 150 °C for 12-36 h. The titanate nanoribbons before and after hydrothermal post-treatment were characterized with FESEM, XRD, TEM, UV-VIS and nitrogen adsorption-desorption isotherms. The results showed that the hydrothermal post-treatment not only promoted the phase transformation from titanate to anatase TiO₂, but also was beneficial to the removal of Na⁺ ions remained in the titanate nanoribbons. After hydrothermal post-treatment, the TiO₂ samples retained the one-dimensional structure feature of the titanate nanoribbons and showed an obvious increase in the specific surface area and the pore volume.     

新型配位聚合物[Zn6（bta）4（2,2′-bipy）3]的合成、晶体结构和荧光性质

采用水热法合成了一种新的三维配位聚合物[Zn6(bta)4(2,2′-bipy)3](H3bta=1,3,5-苯三乙酸;2,2′-bipy=2,2′-二联吡啶),并通过X射线单晶结构分析、红外光谱、元素分析和热重分析对该配合物进行了表征.结构分析数据表明,该配合物属单斜晶系,Cc空间群,晶胞参数a=1·7714(4)nm,b=2·4391(5)nm,c=1·7120(3)nm,β=104·39(3)°,Z=4,V=7·165(2)nm3,Dc=1·722g/cm3,μ=2·065mm-1,F(000)=3768,R1=0·0645,wR2=0·1424.荧光光谱结果表明,配合物具有良好的荧光性质.     

CH4, CO2和H2O在非金属原子修饰石墨烯表面的吸附

煤层气(矿井瓦斯)是一种有望替代传统化石燃料，如煤、石油和天然气的非常规气体. 作为可得的清洁能源，它的利用被认为是节能和经济的选择. 在本工作中，非金属原子X(X=H，O，N，S，P，Si，F，Cl)修饰的石墨烯(Gr)被用来代表具有结构异性的煤表面模型. 通过密度泛函理论系统地研究了煤层气组分Y(Y=CH₄，CO₂，H₂O)在非金属原子修饰石墨烯上的吸附作用. 结果表明Y在非金属原子修饰石墨烯上的吸附均为物理吸附. 态密度和差分电荷密度共同表明了这种弱的相互作用.其中，H和Cl对CH₄的作用较大； N、O、F、Cl对CO₂的作用较强； N，Cl对H₂O的影响不容忽视. 总的来说，吸附能大小依次为：H₂O>CO₂>CH₄. 因此，在CH₄富集的煤层里注入H₂O或CO₂可以与CH₄形成竞争吸附，进而提高煤层气采收率. 本工作提供了在分子水平下煤层气与非金属原子修饰石墨烯之间的相互作用的详情，并为煤层瓦斯的开采与分离提供了有用的信息.     

Structure and Thermal Stability of a Novel 2‐D Layered Copper(II) Coordination Polymer with the Bidentate Ligand 1, 2, 4‐Triazol‐5‐one

Single crystals of {[Cu(TO)₂(H₂O)₂](NO₃)₂}_n (TO: 1, 2, 4‐triazol‐5‐one) were grown by slow evaporation from aqueous solution. It crystallizes in the orthorhombic space group Pbca, with a = 7.082(1), b = 10.285(1), c = 17.911(3)Å, V = 1304.6(3)ų, Z = 4. The Cu^II distorted octahedra are bridged by bidentate TO ligands into infinite 2‐D interlaced rhombic grid‐like network planes, {[Cu(TO)₂(H₂O)₂]²⁺}_n. Hydrogen bonds, electrostatic interactions, and weak van der Waals' forces assemble these planes and the NO₃^— anions to a layered structure. The title compound decomposes at 153.4 °C to the final products, Cu(CN)₂ and CuO.     

A new strategy for the construction of the imidazo[1,5-a]quinoxalin-4-one ring system and its application to the efficient synthesis of BMS-238497, a novel and potent Lck inhibitor

A new efficient strategy was developed for the construction of the imidazo[1,5-a]quinoxalin-4-one ring system. The new method involves condensation of o-nitroaniline with glyoxylate in methanol followed by treatment of the resulting alpha-(o-nitroanilino)-alpha-methoxy acetate with tosylmethyl isocyanide (TosMIC) reagent to give 1-(o-nitrophenyl)imidazole-5-carboxylate. Reductive cyclization of the nitro imidazole carboxylate afforded imidazo[1,5-a]quinoxalin-4-one in three steps and 60% overall yield. The new method was successfully applied to the synthesis of BMS-238497, a novel and potent Lck inhibitor.     

Elucidation of stabilizing pickering emulsion with jackfruit filum pectin-soy protein nanoparticles obtained by photocatalysis

There is still the dearth of reports of jackfruit filum pectin-based nanoparticles as the Pickering emulsifiers with respect to the applications in foods, cosmetics and medicines. So we fabricated soy protein-jackfruit filum pectin nanoparticles (SPP) by photocatalysis as Pickering emulsifier. Jackfruit filum pectin exhibited lower yield (17.31%), degree of methoxylation (15.53%), but higher galacuronic acid content (74.22%). A strong linkage between pectin and soy protein was formed by photocatalysis. The conjugated polymer could self-assemble into compact near globular nanoparticle. The mean size of SPP was larger than that of soy protein nanoparticles but smaller than that of soy protein-pectin complex without photocatalysis. Besides, the zeta potential of SPP was ?33.8?mV, significantly lower than that of soy protein nanoparticles but higher than that of control sample, further confirming that SPP surfaces were completely covered with pectin molecules. Compared with control sample, the three-phase contact angle increased from 42.7 to 90.6°, indicated that SPP could be developed as effective Pickering emulsifiers. The emulsions stabilized by SPP exhibited high thermal stability and excellent salt tolerance as well as good freeze-thaw stability in comparison with emulsions covered with control sample. These findings would provide a potential way of producing effective Pickering emulsifier.GRAPHICAL ABSTRACT     

Heterotrimetallic 4f-3d coordination polymers: synthesis, crystal structure, and magnetic properties

A series of cyano-bridged heterotrimetallic complexes [CuL](2)Ln(H(2)O)(2)M(CN)(6).7H(2)O have been synthesized by the reactions of CuL (L(2)(-) = dianion of 1,4,8,11-tetraazacyclotradecane-2,3-dione), Ln(3+) (Ln = Gd or La), and [M(CN)(6)](3)(-) (M = Co, Fe, or Cr). X-ray diffraction analysis reveals that these complexes are isostructural and have a novel chain structure. The Ln(3+) ion is eight-coordinated by six oxygen atoms of two CuL and two water molecules and two nitrogen atoms of the bridging cyano ligands of two [M(CN)(6)](3)(-), while the [M(CN)(6)](3)(-) anion connects two Ln(3+) using two trans-CN(-) ligands giving rise to a chainlike structure. In the chain, every CuL group tilts toward the CN(-) ligand of adjacent [M(CN)(6)](3)(-) with the Cu-N(cyano) contacts ranging from 2.864(6) to 2.930(6) A. Magnetic studies on the CuGdCo complex (1) indicate the presence of ferromagnetic coupling between Cu(II) and Gd(III). The CuLaCr (5) and CuLaFe (2) complexes exhibit ferromagnetic interaction between paramagnetic Cu(II) and Cr(III)/Fe(III) ions through the weak cyano bridges (Cu-N(cyano) = 2.930(6) A for 2). A global ferromagnetic interaction is operative in the CuGdFe complex (3) with the concurrence of dominant ferromagnetic Cu(II)-Gd(III) and minor antiferromagnetic Gd(III)-Fe(III) as well as the ferromagnetic Cu(II)-Fe(III) interaction. For the CuGdCr complex (4), an overall antiferromagnetic behavior was observed, which is attributed to the presence of dominant antiferromagnetic Cr(III)-Gd(III) coupling and the minor ferromagnetic Cu(II)-Gd(III) and Cu(II)-Cr(III) interaction. Moreover, a spin frustration phenomenon was found in complex 4, which results from the ferro-ferro-antiferromagnetic exchanges in the trigonal Cu-Gd-Cr units. The magnetic susceptibilities of these complexes were simulated using suitable models. The magneto-structural correlation was investigated. These complexes did not show a magnetic phase transition down to 1.8 K.