PREPARATION AND SWELLING PROPERTIES OF SUPER-ABSORBENT POLYMER

A super-absorbent polymer is prepared by graft polymerizing acrylamide (AM) ontopotato starch using ceric ammonium nitrate (CAN) and N, N′-methylene-bis-acrylamide(bisAM) as an initiator and cross-linking agent respectively, and then subjecting the potatostarch-poly(acrylamide) (PAM) graft copolymer (SPAM ) to alkaline saponification. Thewater absorbency (WA) of the sample is nearly 5000 g H_2O/g for dry sample in 24 hat room temperature and is far larger than that of reported in the literature. Thevariables affecting the WA were investigated and optimized, they were: concentrations ofpotato starch, AM, CAN and bisAM were 26.3 g/L, 1.14 mol/L, 10.3 mmol/L and 0.53mmol/L, respectively. The amount of sodium hydroxide was 15 g and the temperatures ofgraft copolymerization and saponification reactions were 60℃ and 95℃. The time of graftcopolymerization and saponification reactions was 2 h, respectively.     

Ionic Liquid Based Electrolyte with Mesoporous Silica SBA-15 as Framework for Quasi-solid-state Dye-sensitized Solar Cells

Quasi-solid-state electrolytes were fabricated with mesoporous silica SBA-15 as a framework material. Ionic conductivity measurements revealed that SBA-15 can enhance the conductivity of the quasi-solid-state electrolyte. The diffusion coefficients of polyiodide ions such as Ⅰ3ˉ and Ⅰ5ˉ which were confirmed by Raman spectroscopic measurement, were about twice larger than that of I-. The optimized photoenergy conversion efficiency of dye-sensitized solar cells （DSSC） with the quasi-solid-state electrolyte was 4.3% under AM 1.5 irradiation at 75 mW·cm^-2 light intensity.     

木材溶液中羟基与异氰酸酯反应的研究

以涂料工业广泛应用的新型助剂二元酸酯 (DBE)为液化试剂 ,盐酸为催化剂 ,将苯甲基化木材溶液化后 ,与不同结构的异氰酸酯反应 .利用FT IR及1 3C NMR分析液化苯甲基木质纤维素与不同结构异氰酸酯得到了聚氨酯树脂 ,证明了木材中羟基可以用来作为聚醚多元醇与异氰酸酯制备聚氨酯材料 .通过准确测量体系中游离的NCO含量 ,从而得出不同结构异氰酸酯与木材溶液中羟基的反应规律 .实验结果表明 ,异氰酸酯的存在大大促进了木材结构中羟基的释放 ,由于不同异氰酸酯的活性不同 ,使得羟基值变化亦不相同 ,其顺序为IPDI>HDI>TDI .为了保证最终的材料性能 ,选择TDI和IPDI作为木材溶液制备聚氨酯树脂的异氰酸酯组份较好     

Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecular imprinting is a method to prepare polymers with recognition site of desired and predetermined selectivity1. Molecularly imprinted polymers (MIP) are prepared by copolymerizing functional and cross-linking monomers in the presence of a molecular …     

聚碳硅烷的高温高压生成机理研究

分别以聚二甲基硅烷(PDMS)、液态聚硅烷(LPS)及PDMS裂解剩余物(LPCS)为原料,在不同的温度下高压合成聚碳硅烷(PCS),采用红外、紫外、核磁共振、分子量及其分布等分析PCS的组成、结构随温度的变化.同时,采用改变减压蒸馏温度的办法,对PCS进行分级,收集在不同蒸馏温度下的馏分,通过对一系列馏分进行了IR分析,以此推测PCS的转化过程.研究表明,PCS的生成过程是随着温度的升高,PDMS、LPS中键能较低的Si—Si键断裂,逐渐转变成为键能较高的Si—C键,转化为低分子的碳硅烷;随着温度的升高,碳硅烷分子间发生脱氢、脱甲烷缩合反应使产物的分子量逐渐长大,生成PCS.     

Synthesis and Crystal Structure of 〔P(CH_2Ph)Ph_3〕〔PdWS_4(S_2CNC_4H_8)〕

1INTRoDUCTIoNThiomolybdate(thiotungstate)isafundamentalunitoPsomemolybdenumen-zymesandplaysanimportantroleincoordinationchemistryasaligandforothermet-alstoformanalogouscompoundsofmetalloproteinst'3.Recentlyinterestingnonlinearoptical(NLO)propertieshavebeendiscoveredforthetypeofMo(W)-Cu(Ag)-Sclusterst2.33.Bythevarioussyntheticmethodsseveralhundredmixedmetalclustersandcomplexes,Mo(W)-M-S(M=transitionmetal),havebeensynthesizedt'i.AmongthesecompoundsthecasesofMbeingCu,Ag,Feareusualwhile…     

载体和担载酸对乙烯直接氧化合成乙酸反应的影响

 在固定床流动反应器上研究了Pd－酸／载体体系催化乙烯直接氧\r\n化合成乙酸的反应，并对载体相同但担载酸强度不同的催化剂的催化活\r\n性进行了比较．结果表明，担载酸的强度明显影响催化剂的活性，酸强\r\n度越大其催化活性越高．用NH3－TPD和异丙醇脱水探针反应表征了二氧\r\n化硅、活性碳和酸性白土三种载体担载的Pd－H4SiW12催化剂的酸性，\r\n并测试了三种催化剂的催化活性．结果表明，载体通过影响担载酸的强\r\n度而影响催化剂的活性，载体上的强酸中心越多，催化剂的活性越高．\r\n测定了二氧化硅、活性碳和酸性白土三种载体担载的Pd－H4SiW12催化\r\n剂上Pd的分散度，并与其催化活性相关联．结果表明，决定乙烯直接氧\r\n化生成乙酸反应活性的主要因素是催化剂的酸强度而不是Pd的分散度．     

碱金属盐对ZSM-5分子筛晶化的影响

Effect of different alkali metal salts on the crystal size and the crystallization rate of ZSM-5 zeolite was de-tailedly investigated in this paper. The samples prepared by adding the different alkali metal salts were character-ized by using XRD， TEM， TG-DSC， BET and IR techniques. The XRD results showed that， for the nanosized ZSM-5 zeolite， the characteristic peaks broadened on the XRD patterns in comparison with the microsized ZSM-5 zeolite. The SEM results verified that the crystal size of zeolites prepared by adding different alkali metal salts had different results， and adding NaCl， NaC₂H₃O₂ and KCl showed the better effect of reducing crystal size， which are about of 40～60nm size. The crystallization curve of adding the different alkali metal salts suggested that the crystallization rate was significantly affected by the anions in the alkali metal salt besides the cations. Moreover， the crystal size likewise depended on the anion in the alkali metal salt. In addition， the BET results suggested that the nanosized ZSM-5 zeolite possessed a larger outer surface area in comparison with the microsized ZSM-5 zeolite. The thermostability of the samples was determined by TG-DSC technique， indicating that the nanosized ZSM-5 zeolite had a poor thermostability as compared with the microsized ZSM-5 zeolite. The possible difference of the samples with different crystal sizes on IR spectra was also given.     

紫外预电离TEA CO2激光器放电特性的实验研究

 横向激励大气压（transversely excited atmospheric,TEA）CO₂激光器的放电稳定性是决定该类型激光器应用效果的关键因素。通过对采用电感充放电电路的紫外预电离激光器的实验研究，得到了激光器放电动态过程的规律，并发现残余振荡是主放电后发生弧光放电的主要原因。实验中采用不同配比的气体，并对电感充放电电路与改进后的硅堆充放电电路进行了比较。实验结果表明：增加充电电感值可以降低主放电结束后储能电容上的残余电压；而采用硅堆放电电路在主放电后仅有相对幅值很低的稳定残压，两种方案都大幅度抑制了弧光放电的形成，有效地提高了激光单脉冲能量。