Li3AlB2O6： Synthesis, Crystal Structure, and Its Luminescence Property Compared with LiSrBO3

The synthesis and crystal structure of Li3AlB2O6 with different cell parameters are reported and these cells are transformed each other from the confirmation of crystallographic structural analyses. The absorption spectrum, luminescence and lifetimes of the Li3AlB2O6 and LiSrBO3 solid compounds are measured and the comparisons are made between them. It is shown that the absorption edges are at about 400 nm (or band gap 3.1 eV) and there is one of absorption peaks at about 350 nm for the Li3AlB2O6 and LiSrBO3. The emission band (530 nm) makes a red shift and fluorescence decay time (24.39 ns) of the Li3AlB2O6 becomes smaller compared with the emission band (480 nm) and lifetime (93.16 ns) of the LiSrBO3 at the visible region. The transition energies and oscillator strengths of the clusters (Li3AlB2O6)2 and (LiSrBO3)2 lying at low excited states are calculated by the time-dependent Hartree-Fock method. The obtained results are used to model the photophysical properties and discuss the origin of spectral bands of the Li3AlB2O6 and LiSrBO3.     

催化增强化学蒸气沉积法在聚酰亚胺上沉积钯-铂合金薄层

以N₂，O₂作载气，通过催化增强化学蒸气沉积(CECVD)分别制得在聚酰亚胺上的金属铂、钯及其合金薄层。铂、钯配合物的共同沉积可生成Pt-Pd合金薄膜。在Pd-Pt合金的沉积过程中，Pd/Pt的原子数比率随共同沉积的条件改变而变化。O₂为载气、300 ℃条件下,用Pd(η³-allyl)(hfac)和Pt(COD)Me₂作前驱体共沉积制备Pd-Pt合金，得到含Pd 37.2%，Pt 62.8%且不     

RE(CCl_3COO)_3(Phen)_2·nH_2O混配配合物的合成、性质及晶体结构

利用水和乙醇混合溶剂合成了稀土三氯醋酸盐与2份1,10-邻菲绕啉(phen)配合物RE(CCl_3COO)_3(phen)_2·nH_2O(RE=Nd,Sm,n=0;RE=Eu,n=2)的单晶.结构测定表明,Nd(CCl_3COO)_3(phen)_2为三斜晶系,每个三氯醋酸盐均以双齿配位,2个phen亦为双齿配位,故配位单元中钕为10配位;Eu(CCl_3COO)_3(phen)_2·2H_2O为单斜晶系,1个三氯醋酸根在外界,2个三氯醋酸根为单齿配位,2个phen为双齿配位,另有2分配位水,故配位单元中Eu为8配位.     

气相渗透法中的溶质吸附效应

在气相渗透仪上，用四个低分子量有机化合物和五个已知平均分子量的窄分布聚苯乙烯低聚体，对ＶＰＯ方法中的溶质吸附效应作了研究，提出了一种对吸附效应作改正的方法．所得结果表明，在扣除溶质吸附效应后，仪器常数Ｋ无分子量依赖性，提高了测定低分子量聚合物数均分子量的准确性．     

Synthesis and properties of one-dimensional Ni(Ⅱ) and Ni(Ⅱ)Cu(Ⅱ) complexes linked by hydrogen bond

Four dithiooxalato (Dto) bridged one-dimensional Ni(ll) and Ni(ll)Cu(ll) complexes (Me6[14]dieneN4)Ni2(Dto)2) (1), (Me6[14]dieneN4)CuNi(Dto)2 (2), (Me6[14]aneN4)Ni2(Dto)2 (3), and (Me6[14]aneN4)CuNi(Dto)2(4), were synthesized. These complexes have been characterized by elemental analysis, IR, UV and ESR spectra. The crystal structure of complex 3 was determined. It crystallizes in the monoclinic system, space group C2/c with a = 2.2425(4) nm, b = 1.0088(2) nm, c=1.4665(3) nm, β= 125.32(3)° ;Z=4; R = 0.076, Rw = 0.079. In the complex, Ni(1) coordinates four sulphur atoms of two Dto ligands in plane square environment. Ni(2) lies in the center of mac-rocyclic ligand. For Dto ligand, two sulphur atoms coordinate Ni(1), and O(1) coordinates Ni(2) and forms weak coordination bond. O(2) is linked to N(2) of macrocyclic ligand through hydrogen bond.     

(R)-1，1′-联萘手性单元通过溶胶凝胶法合成杂化硅干凝胶(英)

Precursor molecule (R)-6,6′-bis(triethoxysilylethen-2-yl)-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (R-2) was synthesized by Pd-catalyzed Heck reaction of (R)-6,6′-dibromo-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (R-1) intermediate with vinyltriethoxysilane. The hydrolysis and polycondensation of the precursor R-2 produced the corresponding xerogel. Both precursor and xerogel were analysed by NMR, FTIR, UV, CD spectra, fluorescent spectroscopy, polarimetry and elemental analysis. The precursor and xerogel can emit strong blue fluorescence and are expected to have a potential application in the separation of chiral molecules as fluorescent sensor. The precursor exhibits strong Cotton effect in its circular dichroism (CD) spectrum indicating a highly rigid structure.     

Synthesis and magnetic properties of μ-phenolato copper (Ⅱ) binuclear complexes with different exogenous bridges

The syntheses and magnetic properties are reported for a series of copper(Ⅱ) complexes prepared from a pentadentate binucleating ligand 2,6-diformyl-4-methylphenol di(benzoyl-hydrazone) (H3L). These complexes incorporate different exogenous ions (X-) into a bridging position to form copper(Ⅱ) binuclear complexes of the formula [Cu2(H2L)X]2+, where X-= Br-(1), Cl-(2), HO-(3), C2H5O-(4) and C3H3N2- (5). The complexes have been characterized with variable temperature magnetic susceptibility (4.2-300 K) and the observed data were fit to those from a modified Bleaney-Bowers equation by least-squares method, giving the exchange integral 2J = -6.2 cm-1 for 1, -76.4 cm-1 for 2, -241.9 cm-1 for 3, -231.1 cm-1 for 4 and -343.8 cm-1 for 5. This suggested that there is an antiferromagnetic interaction between the Cu(Ⅱ) ions and the sequence of the effect of some exogenous bridging ligands on magnetic coupling is corresponding to that in spectrochemical series.     

STUDY ON THE SWELLING BEHAVIOUR OF COPOLYMER HYDROGEL

The states of water in poly (N-vinylpyrrolidone-methylmethacrylate) and poly (N-vinylpyrroli-done-2-hydroxyethyl methacrylate) hydrogels have been studied by means of DSC. The effect ofpolmer structure on equilibrium swelling extent of water has been examined. It was found that thestate of water and the water content in different hydrogels were dependent on the kind of monomer used,the component of copolymer, the sequence distribution of the monomer unit and the degree of cross-linking (including chemical and physical) to a great extent. The equilibrium water content of thehydrogel may be regarded as the sum of the different state of swollen water contents of the hydrogel.Based on these, a semiempirical formula used to estimate the equilibrium water content of the copolymerhydrogels was presented.     

用多分散高聚物标样作凝胶色谱的分子量分离和扩展效应同时校准

根据凝胶色谱柱在理想工作条件下单分散高分子组分的校准关系与多分散试样的实效关系之间的理论联系,建议了一种简单的觅数方法,同时作凝胶色谱柱的分子量分离和扩展因子的校准。用本法从窄分布的聚苯乙烯和宽分布的1,2-聚丁二烯级分的实验谱图得到的所用凝胶色谱柱的扩展因子与淋出体积间的关系相互重合,与试样种类无关。     

酚醛基活性炭纤维孔结构及其电化学性能研究

利用水蒸汽活化法制备了酚醛基活性炭纤维(ACF-H2O), 对其比表面积、孔结构与在LiClO4/PC(聚碳酸丙烯酯)有机电解液中的电容性能之间的关系进行了探讨. 用N2(77 K)吸附法测定活性炭纤维的孔结构和比表面积, 用恒流充放电法和交流阻抗技术测量双电层电容器(EDLC)的电容量及内部阻抗. 研究表明, 在LiClO4/PC有机电解液中, ACF-H2O电极的可用孔径(d)应在0.7 nm以上. 随着活化时间的延长, ACF-H2O的孔容和比表面不断增大, 但微孔(0.7 nm ＜ d ＜ 2.0 nm)和中孔(d ＞ 2.0 nm)率变化很小, 活化过程中孔的延伸和拓宽同步进行, 但过度活化则造成孔壁塌陷, 孔容和比表面迅速下降. 因此, 除活化过度的样品外, 电容量随比表面积呈线性增长, 最高达到109. 6 F•g-1. 但中孔和微孔的孔表面对电容的贡献不同, 其单位面积电容分别为8.44 μF•cm-2和4.29 μF•cm-2, 中孔具有更高的表面利用率. ACF-H2O电极的电容量、阻抗特性和孔结构密切相关. 随着孔径的增大, 时间常数减小, 电解液离子更易于向孔内快速迁移, 阻抗降低, 电极具有更好的充放电倍率特性. 因此, 提高孔径和比表面积, 减少超微孔(d ＜ 0.7 nm), 是提高 EDLC能量密度和功率密度的重要途径. 然而仅采用水蒸汽活化, 只能在小中孔以下的孔径范围内进行调孔, ACF-H2O电极电容性能的提高受限.