溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的研究

采用溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的制备了氧化铝负载的铜基超细粒子催化剂，用ＴＧ－ＤＴＡ，ＸＲＤ，ＢＥＴ以及ＴＥＭ等技术手段，对催化剂的物相结构，表面孔结构，粒子形貌以及催化性能等进行了研究。结果表明，利用溶胶凝胶法，可以直接帛备出高比表面积，低堆积密度的纤维状纳米级负载型Ｃｕ／Ａｌ２Ｏ３超细粒子；活性组分以远低于纳米级的微晶粒子簇状态，均匀地分散在纳米级氧化铝载体表面上，而且在低于５０     

流动注射化学发光抑制法测定维生素E

实验发现,H2SO4-KMnO4-甲醛在丙酮存在下发光信号大大增强,据此建立了H2SO4-KMnO4-甲醛-丙酮新体系。同时发现维生素E(VE)对H2SO4-KMnO4-甲醛-丙酮化学发光体系有强烈的抑制作用,建立了维生素E的流动注射化学发光抑制法的新体系。化学发光信号的降低值与VE的浓度在1.0×10-5~1.0×10-3mol/L的范围内呈良好的线性关系,方法的检出限为3.0×10-6mol/L。对1.0×10-4mol/L的VE进行11次平行测定,其相对标准偏差为1.5%。该法已用于VE片剂中VE的测定。     

带功能基的全氟烷基乙烯基醚的研究——3、四氟乙烯与-7,7-二氯-3-氧杂全氟庚烯-1的共聚反应及共聚物的转化

 研究了二个新的全氟烷基乙烯基醚7,7-二氯-3-氧杂全氟庚烯-1(M_0)和10,10-二氯-3,6-二氧杂全氟5-甲基癸烯-1(M₁)-与四氟乙烯(TFE)的共聚反应,聚合物的性质,并测定了TFE-M₀竞聚率。竞聚率的测定证明M₀较其它已报道的全氟烷基乙烯基醚的聚合活性都大。TFE-M₀共聚物通过化学反应可转化成相应的全氟羧酸甲酯树脂。     

一种新的判断高分子相容性的粘度判据

依据最近提出的高分子稀溶液粘度的浓度 依赖性的团簇理论 ,对高分子‘理想混合物’的定义进行了更新的理论分析 .在此基础上提出了一个新的判定高分子相容性的粘度判据 .从现有的大量实验数据看 ,该判据是和事实相符合的     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.     

An Environmentally Benign System for Synthesis of β-Hydroxylketones： L-Histidine Asymmetrically Catalyzed Direct Aldol Reactions in Aqueous Micelle and Water-like Media

The first histidine catalyzed direct aldol reactions of ketones with nitrobenzaldehydes in water and in poly（ethylene glycol） （PEG） were reported. It reveals that histidine is a good aldol catalyst for synthesis of β-hydroxylketones in water and in PEG, giving good to excellent yields of the respective products. Better enantioand regioselectivity were achieved using low molecular weight PEG as the media. The results show that histidine and PEG-200 or -300 may constitute a promising environmentally benign system for asymmetric synthesis of β-hydroxylketones.     

硝酸活化高灵敏度离子选择性电极法测定氟

先在0．5 mol·L-1硝酸介质中活化氟离子选择性电极,再在含硝酸的总离子强度调节混合液(TISAM)中测定氟,线性范围为1×10-7～1×10-2mol·L-1,检出限为1．9μg·L-1。该方法应用于绿茶饮料、水、牛奶中痕量氟的测定,结果的RSD小于4．8％,回收率在96．1％至100．2％之间,对氟离子选择性电极在硝酸介质中的活化机理作了阐述。     

In vitro TRANSFORMATION OF RAT ESOPHAGEAL EPITHELIAL CELLS BY FUSARIN C

Fusarin C (FC) is a mutagenic and carcinogenic mycotoxin which was isolated from Fu-sarium moniliforme culture extracts. The Fusarium moniliforme is one of most prevalent fungi found on corn in Linxian, a high risk area for esophageal cancer. This paper reports, for the first time, the malignant transformation of rat esophageal epithelial cells induced by FC. The transformed cells showed several characteristics of transformation. Colonies were formed after seeding these transformed cells either into selective medium free of epidermal growth factor (EGF) and serum, or on semi-solid agar; there was an increase in chromosome number; the expression of c-myc and v-erb-B oncogenes was enhanced in the cells; and squamous cell carcinomas arose after inoculating the cells into nude mice. The results demonstrated transforming effect of FC on rat esophageal epithelial cells, and indicate that the abnormal expression of some oncogenes could serve as a hew property of transformed cells.     

一种新型可溶性高聚物负载手性配体的合成及其催化烯烃的不对称双羟化反应研究

在碱性条件下, 聚乙二醇单甲醚(HO\|OPEG\|OMe)与1,4-二氟蒽醌进行亲核单取代反应生成中间体F\|AQN-OPEG-OMe, 产率88%. F-AQN-OPEG-OMe与奎宁锂进行亲核取代反应, 以95.6%的产率得到新型手性配体QN\|AQN\|OPEG-Me. QN-QN\|OPEG-Me与OsO4原位配位生成的均相催化剂在4种烯烃的不对称双羟化反应中表现出较高的对映选择性(92%~99%e.e.)和化学产率(80%~94%). 催化活性和立体选择性与Sharpless手性配体(DHQ)2AQN相当. 反应结束后, 配体可用乙醚沉淀回收, 循环使用5次, 催化剂的催化活性和立体选择性无明显改变, 配体的回收率均在95%~97%之间.     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.