振动合成在气垫导轨上的验证

晶格中原子的集体振动——声子与晶格的热力学性质密切相关。它是凝聚态物理中的重要内容并具有广泛的应用。由于介绍量子化的声子需要较多的基础知识,目前很少在本科教学中展示该内容。本文从经典物理的角度出发,通过气垫导轨实验来演示滑块的集体振荡,验证了任一种振动均是由基振动线性叠加而成,这一实验在本科教学中可帮助学生理解"合成、叠加、耦合"等现代物理学概念。     

基于双向偏振态激光诱导荧光方法的离子速度分布函数测量

为了评估利用发散磁场构型双电层效应的紧凑式螺旋波等离子体推力器的离子加速效果,探索了一种双向偏振态激光诱导荧光测量方法来对螺旋波等离子体源近出口端的离子速度分布函数进行测量。实验中采用Ar作为螺旋波等离子体源工质,中心波长为611.662 nm的激光以轴向方式注入等离子体,以激励一价Ar离子获得波长为461.086 nm的诱导荧光光谱。为了消除磁化等离子体中逆塞曼效应对激光诱导荧光光谱带来的分裂影响,通过四分之一波片将入射激光分别调制为左旋和右旋圆偏振态,并对其诱导光谱进行了分别测量,结果发现不同磁场强度下两次测量结果的偏移值与理论高度吻合,证明了双向偏振态激光诱导荧光测量方法的理论可行性。进一步,采用高斯型滤波器反卷积算法从测量光谱中去除自然展宽和能量饱和效应,再通过对两次相反偏振态测量结果进行平移处理消除逆塞曼效应,从而分离得到实际的多普勒效应。测量了射频能量600 W,不同轴向位置、磁场大小以及气体压力下的螺旋波Ar等离子体激光诱导荧光光谱,结果表明在该实验条件下离子并没有因双电层效应而达到期望值的加速效果,离子速度的形成可能只是一种磁约束作用下的双极电场所导致,并不能产生好的推力性能。     

r-过程路径核β——衰变半衰期的估算

分析了20 < A < 190范围内丰中子核β衰变的实验数据,根据半衰期随质子数、中子数以及衰变能变化所呈现的壳效应和对效应等特点,提出了一种有效估算丰中子核β衰变寿命的公式。新的计算公式形式简单包含了较少的参数、计算量小。用该公式能较为准确地再现丰中子核的β衰变半衰期。用RIKEN最新测量丰中子核半衰期检验了该公式的外推能力,本工作可以为r-过程研究提供可靠的输入数据。Experimental data of the β--decay half-lives for the nuclei with atomic number between 20 and 190 are investigated. We have systematically studied the shell effects and pairing effects on β--decay half-lives versus the decay energy Q and nucleon numbers (Z, N). An empirical formula has been proposed to calculate the β--decay half-lives of neutron-rich nuclei. The empirical formula is simple and has relatively few parameters. Experimental β--decay half-lives of the neutron-rich nuclei are well reproduced by the new formula. In addition, the extrapolating capacity of this formula has been checked with the very recent experimental data from RIKEN. The predicted half-lives for r-process relevant nuclei with the current formula can be served as the reliable input of r-process model calculations.     

高超声速可压缩流中粗糙壁热流研究

用计算流体力学（CFD）数值模拟和理论方法对高超声速可压缩湍流中粗糙壁面热增量进行研究. 着重考虑粗糙单元密度和粗糙单元形状对粗糙表面热流的影响. 结果表明： ①粗糙单元密度变化时, CFD数值方法计算所得的粗糙单元等效热流随着粗糙单元密度的降低而增加, 理论方法预测结果的规律随方法不同而不同;②在相同粗糙单元密度和高度时,如果粗糙单元形状改变,CFD计算结果也随之发生改变. 理论预测方法所得结果不发生变化.     

基于偏振光谱BRDF图像的物质分类

提出一种基于偏振光谱二向反射分布函数图像的物质自动分类方法,该方法主要选择偏振光谱二向反射分布函数信息作为新的特征用于物质自动分类.采用支撑向量机的分类方法对不同的天气条件（晴天、多云、阴天）下处于杂乱的自然草地背景环境中的典型目标进行分类,最后比较三种不同特征选择对于分类准确度的影响.采取三种不同的特征选取方法,分别为采用单一的光谱特征、偏振光谱特征及偏振光谱二向反射分布函数特征.最后通过实验得出：将偏振光谱二向反射分布函数作为分类特征在三种不同的天气情况下,分类准确度都较高,特别是在阴天天气条件下,分类准确度明显高于其它两种特征选择.即使是在阴天低照度下的场景中,当不同目标和背景之间的灰度很接近时,采用本文方法也能准确的进行自动分类.
关键词:     

F8BT：P3HT共混薄膜的放大自发辐射

研究了聚合物poly（9,9-dioctylfluorene-co-benzothiadiazole）（F8BT）和poly （3-hexylthiophene）（P3HT）共混薄膜的放大自发辐射（ASE）现象,对影响其阈值的两个因素--增益和损耗进行了详细的研究。结果显示,共混聚合物的发光效率随着P3HT所占比例的增加有所降低。当P3HT比例低于20%时,发光效率降低不多,而其损耗则随着P3HT的增加显著减小。F8BT和P3HT混合后,光损耗系数从7.8 cm^-1下降到4 cm^-1左右。这表明F8BT：P3HT共混聚合物光波导的ASE阈值降低主要是由于其损耗的降低而导致的。ASE阈值的降低预示该材料体系容易实现电泵浦激光。     

基于C8051微控制器的光电信号自动扫描与采集系统

介绍一种基于C8051-F020型微控制器的光电信号自动扫描与采集系统. 该系统通过C8051微控制器控制步进电机和电控平移台的运动,采集光电传感器所获得的测量信号,并通过RS232接口将测量数据发送至计算机,从而实现对空间光强信号的扫描,或者对测量对象的某种空间属性探测.另外,用LabVIEW设计的系统控制软件具有虚拟仪器的功能,可对步进电机进行直观的操作,对所测量的光电信息能够进行实时的显示、处理和存储.     

Large Positive and Negative Lateral Shifts from an Anisotropic Metamaterial Slab Backed by a Metal

The lateral shift of a light beam at the surface of an anisotropie metamaterial （AMM） slab backed by a metal is investigated. Analytical expressions of the lateral shifts are derived using the stationary-phase method, in the case that total reflection does and does not occur at the first interface. The sign of the lateral shift in two situations is discussed, and the necessary conditions for the lateral shift to be positive or negative are given. It is shown that the thickness and physical parameters of the AMM slab and the incident angle of the light beam strongly affect the properties of the lateral shift. Numerical results validate these conclusions. The lossy effect of the metamaterial on the lateral shift is also investigated.     

Phase Transition and Thermodynamics of Ruthenium Diboride via First-Principles Calculations

The pressure induced phase transitions of RuB2 from the OsB2-type structure to the ReB2-type structure are investigated by first-principles calculations based on the plane-wave basis set with the generalized gradient ap- proximation for exchange and correlation. It is found that the phase transition occurs at 18.6 GPa. We predict the phase transition from the OsB2-type RuB2 to the ReB2-type RuB2 at high temperatures for the first time. The dependences of the heat capacity, thermal expansion coefficient, and the Grüneisen parameter on pressure and temperature for OsB2-type RuB2 and ReB2-type RuB2 are also investigated.     

Nanoscale Thermal Response in ZnO Varistors by Atomic Force Microscopy

We report the application of customer-built scanning thermal microscopy （SThM） based on a commercial atomic force microscope to investigate local thermal inhomogeneity of ZnO varistors. The so-called 3ω method, generally used for measuring macroscale thermal conductivity, is set up and integrated with an atomic force microscope to probe the nanoseale thermal property. Remarkably, thermal contrasts of ZnO varistors are firstly imaged by the SThM, indicating the uniform distribution of spinel phases at triple points. The frequency-dependent thermal signal of ZnO varistors is also studied to present quantitative evaluation of local thermal conductivity of the sample.