Mn-Fe_2O_3载氧体作用下CO化学链燃烧特性及动力学研究

采用共沉淀法制备不同物质的量比Mn掺杂的铁基载氧体(Mn-Fe2O3),并进行XRD、BET和TEM表征。开展不同温度下Mn-Fe2O3与CO的化学链燃烧实验,研究载氧体的反应特性,确定较优的掺杂量和反应温度。结果表明,适量的Mn掺杂有助于改善铁基载氧体的反应活性,Fe∶Mn物质的量为50∶1时燃烧反应转化率最高。多循环化学链燃烧实验证实了载氧体稳定性较好。不同升温速率(30、40、50℃/min)下反应动力学分析表明,Mn-Fe2O3与CO的化学链燃烧还原反应均属于随机成核和随后生长的Avrami-Erofeev方程模型,并依据模型分别计算出了该模型的活化能和频率因子。     

Multi-objective optimization of inverse planning for accurate radiotherapy

The multi-objective optimization of inverse planning based on the Pareto solution set, according to the multi-objective character of inverse planning in accurate radiotherapy, was studied in this paper. Firstly,the clinical requirements of a treatment plan were transformed into a multi-objective optimization problem with multiple constraints. Then, the fast and elitist multi-objective Non-dominated Sorting Genetic Algorithm (NSGA-Ⅱ)was introduced to optimize the problem. A clinical example was tested using this method. The results show that an obtained set of non-dominated solutions were uniformly distributed and the corresponding dose distribution of each solution not only approached the expected dose distribution, but also met the dosevolume constraints. It was indicated that the clinical requirements were better satisfied using the method and the planner could select the optimal treatment plan from the non-dominated solution set.     

低钾血症对颅脑创伤患者预后的影响

目的 探讨低钾血症在颅脑创伤患者中的发病情况及其与预后的关系。方法 2010 年6月至2013 年6 月共有168 例住院期间出现低钾血症且年龄≥18 岁的颅脑创伤患者纳入研究。依据低钾血症严重程度的不同,将患者分成轻度组（3.00mmol/L≤血钾＜3.50mmol/L）、中度组（2.50mmol/L≤血钾＜3.00mmol/L）和重度组（血钾＜2.50mmol/L）,各组均采用患者血钾的最低值进行数据分析。高钠血症和低磷血症分别被定义为血钠＞147.00mmol/L 和血磷＜0.80mmol/L。结果 受试患者的血钾在1.10~3.40mmol/L,平均2.90mmol/L。当血钾出现最低值时,与其余两组比较,重度组患者具有更高的血钠和更低的血磷水平（均P＜0.01）。与轻度组（10.5%）或中度组（25.7%）相比,重度组患者的病死率（82.1%）显著上升（均P＜0.01）。多变量逻辑回归分析结果显示,低格拉斯哥昏迷评分（OR=1.28,95%CI=1.12~1.42,P＜0.01）、低血钾（OR=5.57,95%CI=2.76~10.93,P＜0.01）、低血磷（OR=2.76,95%CI=1.11~7.25,P＜0.01）以及高血尿素氮（OR=1.16,95%CI=1.07~1.24,P＜0.01）是导致患者死亡的独立危险因素。结论 颅脑创伤患者是出现低钾血症的高危人群,重度低钾血症的患者更容易合并高钠血症和低磷血症。重度低钾血症和低磷血症是颅脑创伤患者死亡的独立危险因素。     

Numerical estimation of the piecewise constant Robin coefficient by identifying its discontinuous points

We propose a new numerical method for estimating the piecewise constant Robin coefficient in two-dimensional elliptic equation from boundary measurements. The Robin inverse problem is recast into a minimization of an output least-square formulation. A technique based on determining the discontinuous points of the unknown coefficient is suggested, and we investigate the differentiability of the solution and the objective functional with respect to the discontinuous points. Then we apply the Gauss-Newton method for reconstructing the shape of the unknown Robin coefficient. Numerical examples illustrate its efficiency and stability.     

The Investigation of Interaction Competition Between ATP and DIPP-Ala,Boc-Ala,or Ala by ESI-MS/MS and Theoretical Calculation

The interactions between ATP and N-(O,O-diisopropyl) phosphoryl-L-alanine (DIPP-Ala), N-(tert-butoxycarbonyl)-L-alanine (Boc-Ala), or L-alanine (Ala) were investigated by electrospray ionization tandem mass spectrometry (ESI-MS/MS). The non-covalent complexes between ATP and Boc-Ala or DIPP-Ala were observed, while the complex between ATP and Ala was not found in the mass spectra. The affinity of DIPP-Ala for ATP was confirmed to be stronger than that of Boc-Ala by competition experiment. Through molecular modeling calculations, it was found that the non-covalent complexes were stabilized by intermolecular hydrogen bonds, and the affinity sequence for ATP was DIPP-Ala > Boc-Ala > Ala by comparing their binding energy, ?35.407 kcal/mol, ?15.634 kcal/mol, ?6.555 kcal/mol, respectively. The results implied that a phosphoryl group was a very important functional group to provide an interaction site between amino acids and ATP, and that N-phosphoryl amino acids can be used as a good model of protein in the studies of molecular recognition of ATP.     

近红外发光Ag2S-CdS 核壳结构水溶性量子点的合成及光学性质

本文以谷胱甘肽(GSH)作为表面活性剂,采用两步法,先生成Ag2S核,再生长CdS,得到了高质量的Ag2S-CdS核壳结构水溶性量子点。我们用XRD,TEM,HRTEM和EDS研究了产物的结构,形貌和组分,用紫外可见吸收光谱和荧光发射光谱研究了所得量子点的光学性质,同时考察了反应时间,GSH的量,Ag和S源前驱物的含量对量子点光学性质的影响。实验结果表明量子点稳定性好,荧光寿命长,可在710~718 nm近红外区域发光。在核生长过程中,Ag和S源的含量同时影响量子点的发光位置和强度,而GSH量和壳层生长中S源的量几乎只影响近红外发光强度,发光位置保持不变。不同的量子点光学性质可能来源于量子点中组分及表面缺陷的分布。     

试验优化设计Er3+-Yb3+共掺杂Gd2Ti2O7上转换发光特性

采用溶胶-凝胶（Sol-gel）法制备了Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末,通过试验优化设计的理论建立了Er³⁺-Yb³⁺掺杂浓度与发光强度的回归方程,利用遗传算法优化计算出方程的最优解Er³⁺、Yb³⁺掺杂浓度分别为5.60%（物质的量分数）和13.43%。Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末为单一面心立方Gd₂Ti₂O₇相结构,随Yb³⁺共掺杂浓度增加,X射线衍射峰逐渐向高角偏移。在976 nm激光激发下,Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇获得了分别对应于Er³⁺的²H_11/2/⁴S_3/2→⁴I_15/2和⁴F_9/2→⁴I_15/2跃迁的绿色和红色上转换发光,且绿色和红色发光均为双光子吸收过程。研究了最优样品上转换发光与温度之间的关系,发现绿色上转换发光具有优良的温度传感特性,对红色上转换发光的温度猝灭进行了解释。     

CuNPs@Cu（Ⅱ）-AMTD金属有机凝胶复合材料的合成及其催化性能

在Cu（Ⅱ）-AMTD金属有机凝胶基质中原位生长铜纳米粒子,得到了CuNPs@Cu（Ⅱ）-AMTD纳米复合材料,并分别进行了IR,SPR,SEM,TEM,EDX,XPS等测试分析其形貌组成。所得材料对4-硝基酚还原为4-氨基酚以及其他硝基苯的还原反应显示了优良的催化性能。同时也讨论了催化反应的机理。     

室温快速合成Ag基金属有机骨架材料用于电催化还原CO2

选择具有强给电子能力的1,2,4-三唑为配体,成功合成了银基金属有机骨架材料(Ag-MOF)并用于电催化还原CO₂反应(CO₂RR)。借助粉末X射线衍射、透射电子显微镜、扫描电子显微镜、计时电流法等表征手段对材料的晶体结构、形貌和电催化CO₂RR性能进行了系统的研究。与商品化的纳米Ag颗粒对比,Ag-MOF展现出更优异的电催化CO₂RR产物选择性、催化活性和稳定性,在-0.9 V (vs RHE)时,CO的法拉第效率高达96.1%。当电压为-1.1 V (vs RHE)时,电流密度可达17 mA·cm^-2,且电极可以稳定运行300 min。这说明通过选择合适的配体结构,可以改变催化位点周围的化学环境,从而高效将CO₂转化为目标产物。     

三个稀土-主族三金属Ln(III)-Sr(II)-K(I)配合物的结构与发光性质

用2,4,6-吡啶三甲酸和稀土钐、镝或钆的高氯酸盐溶液、碳酸锶、碳酸钾在180℃水热条件下进行反应,制备出3个含有3种金属离子的配位聚合物[LnSrK（ptc）₂（H₂O）]_n（Ln=Sm（1）、Dy（2）、Gd（3）,H₃ptc=2,4,6-吡啶三甲酸）。X射线单晶衍射分析表明三者具有相同的结构,属三斜晶系,P1空间群。配合物中配体2,4,6-吡啶三甲酸根以2种不同的配位方式与3种金属离子配位,一种方式中连接了7个金属离子,另一种方式中连接了8个金属离子。Ln（Ⅲ）为八配位,与羧基上的6个氧原子和2个吡啶环上的2个氮原子配位;Sr（Ⅱ）也是八配位,配位原子均为氧原子;K（I）与5个氧原子配位。荧光发射光谱表明,钐和镝的配合物在紫外光激发下均发射Sm（Ⅲ）和Dy（Ⅲ）两种离子的特征荧光,钆的配合物在紫外光激发下由于发生荷移跃迁而发射绿色荧光。