p型未掺杂富锌ZnO薄膜的形成和性能研究

以高纯ZnO为靶材,氩气为溅射气体,利用射频磁控溅射技术在石英衬底上生长出纤锌矿结构的富锌ZnO薄膜.薄膜沿(002)择优取向生长,厚约为1.2μm,呈现电绝缘特性.将溅射的ZnO薄膜在10-3Pa,510~1 000 K的温度范围等温退火1 h,室温Hall测量结果表明ZnO薄膜的导电性能经历了由绝缘—n型—p型—n型半导体的变化.XPS测试表明ZnO薄膜的Zn/O离子比随退火温度的升高而降低,但一直是富锌ZnO,说明未掺杂的富锌ZnO也可以形成p型导电.p型未掺杂富锌ZnO薄膜的形成可归因于VZn受主浓度可以克服VO和Zni本征施主的补偿效应.     

Mn替代对Dy2AlFe16-xMnx化合物的结构和磁性的影响

通过X射线衍射及磁测量手段研究了Dy2AlFe16-xMnx化合物的结构和磁性.研究结果表明Dy2AlFe16-xMnx化合物具有六角相的Th2Ni17型结构.对x=1,2的样品采用X射线热膨胀测定法在104-647K的温度范围内测量了其热膨胀性质,发现这些化合物在低温下存在热膨胀反常现象,在居里点附近出现负膨胀性质.对自发磁致伸缩的研究结果表明Dy2AlFe16-xMnx化合物中存在着较强的各向异性的自发磁致伸缩,随着Mn含量的增加,其低温下的自发体磁致伸缩减弱.磁测量结果表明Mn的替代导致Dy2AlFe16-xMnx化合物的居里温度及自发磁化强度急剧下降.     

A Convenient Synthetic Method of Metal Dendritic Porphyrins

Metal porphyrins are natural antioxidant reagent1-3. However, due to the characteristics of structures, they are only soluble in inorganic acids and part of polar organic solvents. Thus, it is limited to be used as effective pharmaceutical preparations. T…     

Nd∶NaR(WO_4)_2晶体生长(R=Bi,Y)

采用提拉法生长出了掺钕钨酸铋钠[Nd∶NaBi(WO4)2,简称Nd∶NBW]和掺钕钨酸钇钠[Nd∶NaY(WO4)2,简称Nd∶NYW]晶体,并给出了制备无开裂优质Nd∶NBW和Nd∶NYW晶体的最佳生长工艺参数。从XRD分析得到Nd∶NBW和Nd∶NYW晶体的晶胞参数,并分析了晶体的拉曼光谱,认为二者结构基本相同,为四方晶系、白钨矿结构、I41/a空间群。由吸收光谱可以看出,Nd∶NBW在802nm有较强的吸收峰,Nd∶NYW在804nm、752nm、586nm附近有较强、较宽的吸收峰,二者均适合于LD泵浦;计算了晶体中Nd3+的吸收截面积。     

现场拉曼光谱研究乙腈在金电极上的解离吸附行为

利用共焦显微拉曼系统、结合合适的电极表面粗糙方法研究了非水体系 0 1mol/LLiClO4 /CH3CN溶液中 ,乙腈分子在金表面的吸附和解离行为。结果表明非水体系中乙腈可在金表面发生还原反应 ,产物CN- 离子与电极表面作用形成的表面配合物可在较宽的电位区间吸附于电极表面。溶液中的微量水、激光照射以及电极电位均对该反应有较大的影响。通过拉曼谱图的比较得出乙腈分子解离出的CN- 在金电极表面比在银电极表面有更强的吸附作用。     

光束偏转法自动测试激光等离子体冲击波系统的研制

根据光束偏转原理，研制了激光等离子体冲击波自动测试系统的硬件和软件。该系统使用计算机与可编程序控制器作为上下位机，采取上下位机通讯的方式控制步进电机及二维移动架的移动，以改变探测光的相对位置，并利用单模光纤和光电倍增管将探测到的光偏转信号传入数字示波器进行存储，最后计算机将示波器中采集到的光偏转信号进行分析处理。使用该系统对激光等离子冲击波的衰减过程进行了实际测试，得到了较为理想的实验结果。     

掺杂Er^3＋的TiO2的发射光谱研究

用无水乙醇、冰醋酸、钛酸丁酯凝胶法制备了掺杂Er^3＋的TiO2粉末，测量了其在488m激发下的Stokes发射光谱和980nm激发下的上转换发光光谱。在可见光范围内，观察到了绿光和红光，绿光从500-570nm，对应Er^3＋的^2H11/2,^4S3／2→^4I15/2，红光从650～690m，对应Er^3＋的^4F9／2→^4I15／2的跃迁。由ln Ivis-In Iin曲线可知，绿光和红光均为双光子过程，光强正比于泵浦功率的二次方，即Iout ∝Iin。初步研究了此材料的上转换过程。     

Acoustic vector sensor signal processing

Acoustic vector sensor simultaneously, colocately and directly measures orthogonal components of particle velocity as well as pressure at single point in acoustic field so that is possible to improve performance of traditional underwater acoustic measurement devices or detection systems and extends new ideas for solving practical underwater acoustic engineering problems. Although acoustic vector sensor history of appearing in underwater acoustic area is no long, but with huge and potential military demands, acoustic vector sensor has strong development trend in last decade, it is evolving into a one of important underwater acoustic technology. Under this background, we try to review recent progress in study on acoustic vector sensor signal processing, such as signal detection, DOA estimation, beamforming, and so on.     

Ab Initio Study on the Isomerization and Dehydrogenation of Methylnitrene

The ab initio calculations were performed at the RHF/4-31G level with the reaction pathways of the iso-merization and dehydrogenation of methylnitrene by the intrinsic reaction coordinate method. The results show that the transformation from methylnitrene to methylenimine would be very easy. This accountes for the experimental fact that one couldn' t find the methylnitrene, but only obtained the methylenimine in the pyrolysis of methyl azide. The mode-selective study reveals the reaction coordinates (IRC) of isomerization and dehydrogenation of methylnitrene are associated with the molecular deformation mode of 1191 cm-1 and the methyl group unsymmetrical stretch mode, respectively. The coupling between normal coordinates is favourable to select the reaction channel of isomerization.