Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

流动注射电化学发光测定维生素B1的研究

基于发现在强碱性介质维生素 B1对电生BrO-氧化Luminol的强化学发光有很强的抑制作用, 将在线恒电流电解产生BrO-与流动注射技术结合,建立了流动注射电化学发光测定维生素B1的新方法.该方法测定维生素B1的线性范围为1.0×10-8～6.0×10-6g·ml-1,检出限为3.2×10-9g·ml-1,相对标准偏差为1.2%(n=11).该法具有灵敏度高,可控性强等优点,用于片剂中的维生素B1含量测定,结果满意.     

Advanced Current Collectors for Alkali Metal Anodes

High-energy-density batteries are in urgent need to solve the ever-increasing energy storage demand for portable electronic devices, electric vehicles, and renewable solar and wind energy systems. Alkali metals, typically lithium(Li), sodium(Na) and potassium(K), are considered as the promising anode materials owing to their low electrochemical potential, low density, and high theoretical gravimetric capacities. However, the problem of dendrite growth of alkali metals during their plating/stripping process will lead to low Coulombic efficiencies, a short lifespan and huge volume expansion, eventually hindering their practical commercialization. To resolve this issue, a very effective approach is engineering the anodes on structured current collectors. This review summarizes the development of the alkali metal batteries and discusses the recent advances in rational design of anode current collectors. First, the challenges and strategies of suppressing alkali-metal dendrite growth are presented. Then the special attention is paid to the novel current collector design for dendrite-free alkali metal anodes. Finally, we give conclusions and perspective on the current challenges and future research directions toward advanced anode current collectors for alkali metal batteries.     

聚二甲基硅氧烷分子在溶液中的扩张

高分子溶液性质依赖于在溶液中的形态,高分子-良溶剂溶液由于高分子链段与溶剂分子间相互作用使末端矩h~2~(1/2)大于θ-条件下末端矩h_0~2~(1/2),一维扩张因子α以下式表示     

Synthesis and mesomorphic properties of n-butyl-4- [4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates

A homologous series of n-butyl-4-[4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates have been synthesized.Their phase transition temperatures have also measured by polarizing textural observation and confirmed by DSC.     

用电子散斑干涉法测量材料热膨胀系数

 利用双光束电子散斑干涉法（ESPI）对试件受热变形进行了实时观测，针对一次实验过程中得到的图片较多（300～500幅）的特点，在图像处理时摒弃了以往的手动识别等位移线的办法，用MATLAB语言编写了批处理程序，能够在采集的大量散斑图片中自动快速准确地标定等位移线，得到相应的位移和应变，并结合实时测量的温度值，获得了45钢和LY12铝合金在不同温升率下的热膨胀系数及其随温度的变化。实验结果表明，在涉及的温升率范围内，温升率的改变对材料热膨胀系数的影响不明显，材料的热膨胀系数随温度的升高略有上升。     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

脉冲泄流时土壤条件对冲击接地阻抗的影响

 为了探寻电流脉冲泄流时，设备的接地是否有效可靠，用FDTD法分析了脉冲泄流时均一土壤、分层土壤及局部改善土壤的电导率对冲击接地阻抗（TGR）的影响。结果表明：大地电导率对冲击接地阻抗的影响很大；对均一土壤，TGR随大地电导率的增大而减小，大地电导率越大，TGR对接地体的埋深越不敏感。对分层土壤，接地体要埋在大地电导率大的土壤层中，且不要靠近交界面；局部改善大地导电性能对降低TGR效果明显，TGR对改善区域的体积非常敏感，而当电导率大于一定值时，大地电导率的再增加，对TGR的影响不明显。     

水中硝酸盐氮稳定同位素比值测定前处理方法的优化

水体中过量的硝酸盐导致会严重的水生生态恶化和环境污染问题。氮稳定同位素技术为水体污染来源的判断及水生系统氮素转化机理研究提供了强有力的工具。在前人基础上,通过开发Cu2+-Cd复合催化结合超声波辅助加速反应,优化硝酸盐氮同位素比值测定前处理方法。考察了Cu2+添加量,超声功率以及反应时间变化对NO3--N转化生成N2O气体及其氮同位素比值的影响,在单因素实验基础上采用正交实验优化得到了最佳反应条件,并采用不同15N同位素比值的KNO3标准溶液结合气体预浓缩装置与稳定同位素质谱仪联用系统对新方法进行了验证。新方法单次反应体系中氮最低量为1.0 μg,其中自然丰度和高丰度样品δ15N分析精度小于1‰,富集样品的15N分析精度可达0.1 atom%以内(CV<1%);且所有标准样品的15N测定值与参考值基本一致。将优化后的方法应用于不同来源水样中硝酸盐氮稳定同位素比值测定,均可获得较好的精度,较原方法提高了前处理效率,且精度更优。综上,建立的方法准确可靠,操作简单,耗时短,适用于水中硝酸盐氮稳定同位素比值测定的批量、快速前处理。     

Discussion of Some Problems About Nonlinear Time Series Prediction Using v-Support Vector Machine

Some problems in using v-support vector machine (v-SVM) for the prediction of nonlinear time series are discussed. The problems include selection of various net parameters, which affect the performance of prediction, mixture of kernels, and decomposition cooperation linear programming v-SVM regression, which result in improvements of the algorithm. Computer simulations in the prediction of nonlinear time series produced by Mackey-Glass equation and Lorenz equation provide some improved results.