空间光学遥感器遮光罩结构方案选择

利用有限元工程分析技术对空间光学遥感器的遮光罩结构方案进行了选择。应用MSC.Patran/Nastran软件对遮光罩进行了模态分析,应用TMG软件对遮光罩进行了热分析。根据模态分析和热分析的结果对遮光罩材料的铺层方式、遮光罩的结构形式和遮光罩的长度进行了优选。结果表明,[-45°/90°/45°/0°]s交叉对称铺层方式、一条轴向筋和1mm厚度、200mm长度的四棱台式遮光罩的结构方案是合理可行的。其结果为遮光罩的结构设计提供了必要的指导。     

压缩系数可控的光脉冲压缩器

提出了一种压缩系数可控的光脉冲压缩器.该脉冲压缩器主体包括梳状色散分布光纤（CDPF）和喇曼放大器两部分.梳状色散分布光纤由多段色散位移光纤和单模光纤拼接而成,具有喇曼增益介质的功能.对一给定的光脉冲序列,可以通过控制泵浦功率实现脉冲压缩器的压缩率可调.通过对非线性薛定锷方程的数值模拟,这一光脉冲压缩器的性能得到了验证.当光脉冲在CDPF中传输时,脉冲得到压缩并且被放大.对喇曼泵浦功率来改变可以得到不同的输出脉宽.通过优化CDPF的结构,得到了喇曼泵浦功率和压缩系数之间很好的线性关系.     

双菱体λ/4消色差相位延迟器的设计

根据菲涅尔全内反射相变理论,给出了双菱体λ/4消色差器的结构设计、性能分析和测量方法.由有效通光孔径和光线追迹设计出BK7玻璃在波长532 nm时相位延迟λ/4的双菱体的结构,用作532 nm至1 064 nm波长范围的标准λ/4相位延迟器.理论分析了入射角变化和波长变化对双菱体相位延迟的影响,当入射角变化限制在±4.3°以内时,其影响得到补偿;波长从532 nm到1 064 nm产生的误差为－0.65°.采用椭偏法中的消光技术,分别实测了双菱体在532 nm和1 064 nm波长下的相位延迟为：90.08±0.14°和88.99±0.1°,可知两不同波长产生的相位延迟误差为－1.09°.     

亚微米光栅型导光板设计

提出了利用亚微米光栅制作导光板的方法,给出亚微米光栅型导光板的初始结构.用严格耦合波理论计算分析了在满足基底全反射条件的45°入射角下红(700 nm)、绿(555 nm)、蓝(465 nm)三色光垂直出射的亚微米光栅(0.651μm、0.516μm、0.433μm)在槽深0.05~0.9μm之间变化时,透射衍射效率在2%~43%之间变化.分析了亚微米光栅的作用,做出性能评价,并研究了特定范围入射角引起的衍射角变化.     

激光靶心冲击波观测镜折反式光学系统设计

设计了一种激光靶心冲击波观测镜的光学系统.用反射式光学系统代替折射式光学系统,解决了普通玻璃在200 nm端透过率较低的问题.反射镜不引入色差,有利于系统在200~800 nm谱段消色差.为消系统轴外像差,反射系统选型为对称式.反射镜全部采用球面镜,为消反射镜以及平板玻璃窗带入的球差,引入校正镜(材料JGS1),在满足要求的条件下,控制折射镜的厚度,使系统色差满足瑞利判据的色差允差,得到了良好的成像质量.     

Asymmetric Superradiant Scattering Patterns from Bose--Einstein Condensates

The asymmetric patterns of superradiance from Bose-Einstein condensates are studied for the spatially inhomogeneous pump pulse with the semiclassical Maxwell-Schrodinger equations. The coupling dynamics between the optical field and condensate in the strong pulse and a faded wing in the weak coupling regime are discussed, which not only explain the spatial effects in the process of superradiance, but also supply a new method to control its patterns.     

High Power Continuous-Wave and Acousto-Optic Q-Switched Nd：GdVO4 Laser Operated at 912 nm

We present a high power and efficient operation of the ^4F3/2 → ^4I9/2 transition in Nd：GdVO4 at 912nm. In the cw mode, the maximum output power of 8.6 W is achieved when the incident pump power is 40.3 W, leading to a slope efficiency of 33.3% and an optical-optical efficiency of 21.3%. To the best of our knowledge, this is the highest cw laser power at 912nm obtained with the conventional Nd：GdVO4 crystal. Pulsed operation of 912nm laser has also been realized by inserting a small aeousto-optie （A-O） Q-Switch inside the resonator. As a result, the minimal pulse width of 20ns and the average laser power 1.43 W at the repetition rate of lOkHz are obtained, corresponding to 7.1 kW peak power. We believe that this is the highest laser peak power at 912nm. Furthermore, duration of 65ns has also been acquired when the repetition rate is 100 kHz.     

AlGaN-Based Solar-Blind Schottky Photodetectors Fabricated on AlN/Sapphire Template

We report AlGaN-based back-illuminated solar-blind Schottky-type ultraviolet photodetectors with the cutoff- wavelength from 280nm to 292nm without bias. The devices show low dark current of 2.1× 10^-6A/cm^2 at the reverse bias of 5 V. The specific detectivity D＊ is estimated to be 3.3 × 10^12cmHz^1/2 W^-1 . To guarantee the performance of the photodetectors, the optimization of AlGaN growth and annealing condition for Schottky contacts were performed. The results show that high-temperature annealing method for Ni/Pt Schottky contacts is effective for the reduction of leakage current.     

精确计算在π~0重整化链图传播下p→p′微分截面

本文采用中性介子π0与核子N-反核子U-强相互作用的Lorentz不变耦合模型,对质子反质子在中性介子π0重整化链图传播下的散射微分截面,作了严格解析计算后获得了"精确"理论结果;进而,又对该计算结果与π0树图传播下的微分截面作了对比分析,获得了相关辐射修正的重要结果.这对于深入研究质子摊贩质子在高、中、低能区中的弹性碰撞及其描述强相互作用的Lorentz不变耦合模型理论,都将提供某些值得借鉴与参考的理论研究价值.     

毛细微槽结构表面的喷雾冷却可视化研究

本文利用高速摄影仪对具有矩形毛细微槽群结构的加热表面进行喷雾冷却的传热特性进行了可视化实验研究.研究结果表明;喷雾冷却与毛细微槽结构相结合可实现高效率的相变换热过程;随着壁面温度的增加,槽表面经历了槽面完全被水浸没区、薄液膜区、部分干涸区和完全干涸区四个不同阶段;低温区主要是界面蒸发传热方式,高温区主要是沸腾换热方式.